Synthesis of renewable alkylated decalins with p-quinone and 2-methyl-2,4-pentanediol

2022 ◽  
Author(s):  
Chunwei Liu ◽  
Yan-Cheng Hu ◽  
Guangyi Li ◽  
Ai-Qin Wang ◽  
Cong Yu ◽  
...  
Keyword(s):  
Aviation Fuel ◽  
Heat Value ◽  
Main Component ◽  
Thermal Stable

Decalins are the main component of JP-900, a coal-based thermal stable advanced aviation fuel. Meanwhile, these compounds are also widely used as additives to improve the volumetric heat value and...

The Performance Study of Aviation Fuel Added with Alcohols

2011 ◽  
Vol 685 ◽  
pp. 316-321 ◽  
Author(s):  
Yue Lin Zhu ◽  
Zhe Yi Meng ◽  
Zeng Hua Chang ◽  
Chang Jian Xiong
Keyword(s):  
Aviation Fuel ◽  
Copper Corrosion ◽  
Performance Study ◽  
Heat Value

Alcohols ranging from C2 to C8 are added to RP-3 jet kerosene to alleviate the pollution when fuel burns. Such mixed fuels are tested in respects of density, viscosity, heat value, rubber compatibility, silver corrosion and copper corrosion. The results show that fuel mixed with n-pentanol resembles RP-3 kerosene best and fuels mixed with ethanol, propanol and n-butanol perform inferior than other mixed fuels in the test for compatibility with rubber. All seven fuels perform well for the test in silver corrosion and copper corrosion. The result for the fuel mixed with ethanol lies slightly behind others in copper corrosion.

The Modulation Study of Emulsified Heavy Oil from Liquid Waste after Pyrolysis of Waste Rubber

2014 ◽  
Vol 529 ◽  
pp. 45-48 ◽  
Author(s):  
Kuo Wei Chen
Keyword(s):  
Heavy Oil ◽  
Process Design ◽  
Liquid Waste ◽  
Fuel Oil ◽  
Combustion Stability ◽  
Product Property ◽  
Emulsified Fuel ◽  
Waste Rubber ◽  
Heat Value ◽  
Main Component

The present research was involved in forming Modulation, Atomizing temperature, adding proportion etc. In addition to ameliorate heat value and Combustion stability of the Emulsified heavy oil modulated from liquid waste after the waste rubber pyrolysis in resource chemical plant. Solve waste rubbers pyrolysis process liquid wastes generated problems This study explored optimal condition of Emulsified heavy oil modulation based on relevant tests to enhance its heat value and combustion stability for optimal utilization of emulsified fuel. The results can serve as a reference to the Emulsified heavy oil modulation process design and mixing with liquids waste. The main component of the formula is an emulsion, Surfactant as emulsion to make the fuel oil uniformly mix with liquid waste. Besides finding a suitable formula, this study also conducted analysis on product property and developed technique to improve process and product property, as an important reference for future studies.

Total etch dentin bonding systems: scanning electron microscopy of the resin-dentin hybrid layer

1992 ◽  
Vol 50 (2) ◽  
pp. 1092-1093
Author(s):  
Jorge Perdigao
Keyword(s):  
Composite Resin ◽  
Mechanical Interlocking ◽  
Hybrid Layer ◽  
Agent Based ◽  
Dentin Bonding ◽  
Acid Agent ◽  
Bond Strengths ◽  
Main Component ◽  
Bonding Systems ◽  
New Generation

In 1955, Buonocore introduced the etching of enamel with phosphoric acid. Bonding to enamel was created by mechanical interlocking of resin tags with enamel prisms. Enamel is an inert tissue whose main component is hydroxyapatite (98% by weight). Conversely, dentin is a wet living tissue crossed by tubules containing cellular extensions of the dental pulp. Dentin consists of 18% of organic material, primarily collagen. Several generations of dentin bonding systems (DBS) have been studied in the last 20 years. The dentin bond strengths associated with these DBS have been constantly lower than the enamel bond strengths. Recently, a new generation of DBS has been described. They are applied in three steps: an acid agent on enamel and dentin (total etch technique), two mixed primers and a bonding agent based on a methacrylate resin. They are supposed to bond composite resin to wet dentin through dentin organic component, forming a peculiar blended structure that is part tooth and part resin: the hybrid layer.

Microwave resonance method for measuring microliter volumes of free moisture in aviation fuels

2020 ◽  
pp. 49-56
Author(s):  
Vitaly V. Volkov ◽  
Michael A. Suslin ◽  
Jamil U. Dumbolov
Keyword(s):  
Solid Surface ◽  
Free Water ◽  
Resonance Method ◽  
Cavity Resonator ◽  
Maximum Error ◽  
Aviation Fuel ◽  
Fuel Quality ◽  
Microwave Resonance ◽  
Free Moisture ◽  
Microwave Losses

One of the conditions for ensuring the safety of air transport operation is the quality of aviation fuel refueled in aircraft. Fuel quality control is a multi-parameter task that includes monitoring the free moisture content. Regulatory documents establish the content of free water no more than 0.0015% by weight. It is developed a direct electrometric microwave resonance method for controlling free moisture in aviation fuels, which consists in changing the shape of the water drops by pressing them on a solid surface inside a cylindrical cavity resonator. This can dramatically increase dielectric losses. Analytical and experimental analysis of the proposed method is carried out. The control range from 0,5 to 30 μl of absolute volume of moisture in aviation fuels with a maximum error of not morethan 25 % is justified. The sensitivity of the proposed method for monitoring microwave losses in free moisture drops transformed into a thin layer by pressing is an order of magnitude greater than the sensitivity of the method for monitoring microwave losses in moisture drops on a solid surface in a resonator. The proposed method can be used as a basis for the development of devices for monitoring the free moisture of aviation fuels in the conditions of the airfield and laboratory. The direction of development of the method is shown.

OPTIMIZATION OF A SURROGATE REDUCED AVIATION FUEL-AIR REACTION MECHANISM USING A GENETIC ALGORITHM

Clean Air ◽  
2007 ◽  
Vol 8 (1) ◽  
pp. 1-24
Author(s):  
M. Pourkashanian ◽  
N. S. Mera ◽  
Lionel Elliott ◽  
C. W. Wilson ◽  
Derek B. Ingham ◽  
...  
Keyword(s):  
Genetic Algorithm ◽  
Reaction Mechanism ◽  
Aviation Fuel

Study regarding the health coefficients for the citizens who practice free time sport activities for the increase of life quality

2014 ◽  
Vol 6 (12) ◽  
pp. 7-12 ◽  
Author(s):  
Liliana Dacica
Keyword(s):  
Motor Skills ◽  
Social Relations ◽  
Life Quality ◽  
Free Time ◽  
Health State ◽  
Beneficial Effects ◽  
Sports Programs ◽  
Sport Activities ◽  
Main Component ◽  
Sports Activities

Abstract The paper presents the results of a determinative study regarding the health profits obtained by the citizens of Caras-Severin County involved in the practice of leisure sport through the program sport for all offered. The aspect highlighted is that sport, for all, has beneficial effects on health being contained by all the components of life quality. The aim of the paper is to prove that issuing leisure time sports programs according to the needs of the client population increases the number of practitioners of sport and implicitly it contributes to the maintenance and improvement of the health state. In order to pursue health profits, the physical and psychic wellbeing of the participants in the sports programs, the observation method, the tests method and the method of recording the health coefficients on a protocol basis were used. The observation was achieved on a sample of 217 subjects which were initially tested, at the beginning of the programs and at the end of the research period. The conclusion was that the main component elements of life quality which can be ameliorated by free time sport activities are: health state; the biologic potential through the evaluation of the anthropometric, functional and physiological coefficients; motor skills; psycho-social relations and social integration. The health state, the biologic potential, motor skills, socialization can be considered dependent variables and through sports activities for all and through the implemented programs a strategic project of continuous development can be elaborated. Leisure sports activities ameliorate life quality of different categories of citizens and social groups.

Leaded Aviation Fuel May Present Long-Term Effects on Campus Life from the Adjacent Albert Whitted Airport

2020 ◽  
Author(s):  
Joseph Matthews ◽  
Madhu Pandey
Keyword(s):  
United States ◽  
Particulate Matter ◽  
The United States ◽  
Aviation Fuel ◽  
University Campus ◽  
Long Term Effects ◽  
Aviation Gasoline ◽  
Suspended Particulate ◽  
Descent Line

Propeller planes and small engine aircraft around the United States, legally utilize leaded aviation gasoline. The purpose of this experiment was to collect suspended particulate matter from a university campus, directly below an airport’s arriving flight path’s descent line, and to analyze lead content suspended in the air. Two collection sets of three separate samples were collected on six separate days, one set in July of 2018 and the second set in January 2019.

Solving the Problem of Silicon Dioxide Melting Based on Deviation Model

2020 ◽  
Vol 2 (1) ◽  
Author(s):  
Yuhan Sun
Keyword(s):  
Silicon Dioxide ◽  
Blast Furnace Slag ◽  
Melting Process ◽  
Melting Rate ◽  
Dissolution Behavior ◽  
Characteristic Parameters ◽  
Contour Feature ◽  
Time Periods ◽  
Main Component ◽  
Furnace Slag

Abstract: In order to reveal the dissolution behavior of iron tailings in blast furnace slag, we studied the main component of silica in iron tailings. First, edge contour features need to be established to represent the melting process of silica. We choose shape, perimeter, area and generalized radius as objects. By independently analyzing the influence of these four indexes on the melting rate, the area and shape were selected as the characteristic parameters of the edge contour of the silica particles. Then, the actual melting rate of the silica is estimated by the edge contour feature index. Finally, we can calculate the melting rate of the first second of three time periods of 0.00010312mm3/s，0.0002399mm3/s，0.0000538mm3/s.

THYMUS VARIABILITY IN WHITE RATS EXPOSED TO FORMALDEHYDE

2019 ◽  
pp. 105-116
Author(s):  
V.N. Voloshin ◽  
I.S. Voloshina ◽  
I.Yu. Vash
Keyword(s):  
White Male ◽  
Principal Component ◽  
Middle Part ◽  
Procrustes Analysis ◽  
Male Rats ◽  
Canonical Variables ◽  
Generalized Procrustes Analysis ◽  
White Rats ◽  
Main Component ◽  
Formaldehyde Inhalation

The aim of the paper is to study thymus variability in white rats, which were exposed to formaldehyde, and to compare these data with the indicators in control animals. Materials and Methods. The trial enrolled 72 white male rats, initial body weight 40–50 g. The animals were divided into 2 groups (36 rats in each). The first group consisted of control rats. Animals of the second group were exposed to formaldehyde inhalation, 2.766 mg/m3. To characterize the variability of the organ size, centroids were determined. The superposition of landmark configurations was performed using the generalized Procrustes analysis method, MorphoJ 1.06d program. The principal component analysis and canonical analysis of the obtained data were carried out. Results. One-Way ANOVA revealed a high level of intergroup differences in Procrust distance (F=1.34; p<0.0001). The significant effect of the duration of formaldehyde exposure on centroid size was established. The Kruskal-Wallis criterion was 19.778 (p=0.0014). The analysis of the principal components indicated that each of the first 10 components stands for more than 1 % of Procrustes coordinate variance. In this case, the first 7 components compatibly explain 91.398 % of thymus variability. The proportion of the first main component to the total variance of the Procrustes coordinates is 40.236 %. PC1 (-) shows changes in the thymus shape, mostly affecting the tops of its lobes, the middle part of the right boundary and the entire left thymus boundary. The scattering ellipses of the thymus ordinates in rats exposed to formaldehyde, in the first two canonical variables are located higher than those in the control animals. Conclusion. Formaldehyde inhalation leads to thymus changes in white rat. The most significant differences with control data are determined along the second canonical variable. Keywords: thymus, form, rat, formaldehyde, geometric morphometry. Цель. Изучение изменчивости формы тимуса белых крыс, находившихся в условиях влияния формальдегида, и сравнение этих данных с показателями, полученными у контрольных животных. Материалы и методы. Работа выполнена на 72 белых крысах-самцах с начальной массой тела 40–50 г. Животные были разделены на 2 серии (по 36 крыс). Первую серию составляли контрольные крысы. Животные второй серии подвергались ингаляционному воздействию формальдегида (ФА) в концентрации 2,766 мг/м3. Для характеристики изменчивости размеров органов определяли размер их центроидов. Процедуру суперимпозиции конфигураций ландмарок выполняли методом генерализованного прокрустова анализа с использованием программы MorphoJ 1.06d. Проводили анализ главных компонент и канонический анализ полученных данных. Результаты. Однофакторный дисперсионный анализ выявил высокий уровень межгрупповых различий по показателю прокрустовых расстояний (F=1,34; р<0,0001). Установлено значительное влияние продолжительности нахождения животных в условиях воздействия ФА на размер центроида. Критерий Краскела–Уоллиса составил 19,778 (р=0,0014). Анализ главных компонент указывал на то, что каждая из первых 10 компонент объясняет более 1 % дисперсии прокрустовых координат. При этом первые 7 компонент совместно объясняют 91,398 % изменчивости формы тимуса. Вклад первой главной компоненты в общую дисперсию прокрустовых координат составляет 40,236 %. РС1 (–) показывает изменения формы тимуса, в большей степени затрагивающие верхушки его долей, среднюю часть правого контура и весь левый контур тимуса. Эллипсы рассеивания ординат тимусов, принадлежащих крысам, подвергавшимся влиянию ФА, в пространстве первых двух канонических переменных расположены выше по отношению к таковым контрольных животных. Заключение. Ингаляционное воздействие формальдегида приводит к изменению формы тимуса белых крыс. Наибольшие различия с контрольными данными определяются вдоль второй канонической переменной. Ключевые слова: тимус, форма, крыса, формальдегид, геометрическая морфометрия.

Sign in / Sign up

Export Citation Format

Share Document