scholarly journals Structural, magnetic and hyperthermia properties and their correlation in cobalt-doped magnetite nanoparticles

RSC Advances ◽  
2022 ◽  
Vol 12 (2) ◽  
pp. 698-707
Author(s):  
L. T. H. Phong ◽  
D. H. Manh ◽  
P. H. Nam ◽  
V. D. Lam ◽  
B. X. Khuyen ◽  
...  
Keyword(s):  
Magnetite Nanoparticles ◽  
Chemical Compositions

The interrelation among chemical compositions, structure, and heating properties of cobalt doped magnetite nanoparticles (CoxFe3−xO4 NPs) for their potential hyperthermia application.

scholarly journals High Yield Synthesis and Application of Magnetite Nanoparticles (Fe3O4)

2020 ◽  
Vol 6 (2) ◽  
pp. 22 ◽  
Author(s):  
Charles Wroblewski ◽  
Tunde Volford ◽  
Blake Martos ◽  
Jurek Samoluk ◽  
Perry Martos
Keyword(s):  
Magnetite Nanoparticles ◽  
De Novo ◽  
Average Particle Size ◽  
Total Iron ◽  
High Yield ◽  
Chemical Compositions ◽  
Average Particle ◽  
Iron Salt ◽  
Mechanical Agitation ◽  
Aqueous Synthesis

Magnetite nanoparticles (Fe3O4), average particle size of 12.9 nm, were synthesized de novo from ferrous and ferric iron salt solutions (total iron salt concentration of 3.8 mM) using steady-state headspace NH3(g), 3.3% v/v, at room temperature and pressure, without mechanical agitation, resulting in >99.9% yield. Nanoparticles size distributions were based on enumeration of TEM images and chemical compositions analyzed by: XRD, EDXRF, and FT-IR; super-paramagnetic properties were analyzed by magnetization saturation (74 emu/g). Studies included varying headspace [NH3(g)] (1.6, 3.3, 8.4% v/v), and total iron concentrations (1.0 mM, 3.8 mM, 10.0 mM, and >>10 mM). An application of the unmodified synthesized magnetite nanoparticles included analyses of tetracycline’s (50, 100, 200, 300, and 400 ppb) in aqueous, which was compared to the same tetracycline concentrations prepared in aqueous synthesis suspension with >97% extraction, analyzed with LC-MS/MS.

Analytical Electron Microscopy of Ion-Implanted Metals

1985 ◽  
Vol 43 ◽  
pp. 282-285
Author(s):  
D.I. Potter ◽  
M. Ahmed ◽  
K. Ruffing
Keyword(s):  
Electron Microscopy ◽  
Ion Implantation ◽  
Friction And Wear ◽  
Analytical Electron Microscopy ◽  
Chemical Compositions ◽  
Surface Chemical ◽  
Near Surface ◽  
The Past ◽  
Analytical Electron ◽  
Property Changes

Ion implantation, used extensively for the past decade in fabricating semiconductor devices, now provides a unique means for altering the near-surface chemical compositions and microstructures of metals. These alterations often significantly improve physical properties that depend on the surface of the material; for example, catalysis, corrosion, oxidation, hardness, friction and wear. Frequently the mechanisms causing these beneficial alterations and property changes remain obscure and much of the current research in the area of ion implantation metallurgy is aimed at identifying such mechanisms. Investigators thus confront two immediate questions: To what extent is the chemical composition changed by implantation? What is the resulting microstructure? These two questions can be investigated very fruitfully with analytical electron microscopy (AEM), as described below.

TEM/AEM characterization of fine-grained clay minerals in very-low-grade rocks: Evaluation of contamination by empa involving celadonite family minerals

1996 ◽  
Vol 54 ◽  
pp. 694-695
Author(s):  
Gejing Li ◽  
D. R. Peacor ◽  
D. S. Coombs ◽  
Y. Kawachi
Keyword(s):  
Electron Microscopy ◽  
Volcanic Rocks ◽  
Analytical Electron Microscopy ◽  
Metamorphic Rocks ◽  
New Mineral ◽  
Chemical Compositions ◽  
Low Grade ◽  
Fine Grained ◽  
Depth Analysis ◽  
Mineral Aggregates

Recent advances in transmission electron microscopy (TEM) and analytical electron microscopy (AEM) have led to many new insights into the structural and chemical characteristics of very finegrained, optically homogeneous mineral aggregates in sedimentary and very low-grade metamorphic rocks. Chemical compositions obtained by electron microprobe analysis (EMPA) on such materials have been shown by TEM/AEM to result from beam overlap on contaminant phases on a scale below resolution of EMPA, which in turn can lead to errors in interpretation and determination of formation conditions. Here we present an in-depth analysis of the relation between AEM and EMPA data, which leads also to the definition of new mineral phases, and demonstrate the resolution power of AEM relative to EMPA in investigations of very fine-grained mineral aggregates in sedimentary and very low-grade metamorphic rocks.Celadonite, having end-member composition KMgFe3+Si4O10(OH)2, and with minor substitution of Fe2+ for Mg and Al for Fe3+ on octahedral sites, is a fine-grained mica widespread in volcanic rocks and volcaniclastic sediments which have undergone low-temperature alteration in the oceanic crust and in burial metamorphic sequences.

Chemical compositions from Biscogniauxia sp. PK15-040 fungus

2019 ◽  
Author(s):  
A Churat ◽  
W Mongkolthanaruk ◽  
N Suwannasai ◽  
N Wangsawat ◽  
S McCloskey
Keyword(s):  
Chemical Compositions

Chemical, anatomical, and technology aspects of Eucalyptus benthamii and Eucalyptus dunii for use in an integrated pulp and paper mill

TAPPI Journal ◽  
2015 ◽  
Vol 14 (2) ◽  
pp. 73-81 ◽  
Author(s):  
GISELY SAMISTRARO ◽  
PETER W. HART ◽  
JORGE LUIZ COLODETTE ◽  
RICARDO PAIM
Keyword(s):  
Energy Levels ◽  
Black Liquor ◽  
Basic Density ◽  
Paper Mill ◽  
Frost Tolerance ◽  
Strength Properties ◽  
Kappa Number ◽  
Pulp Yield ◽  
Chemical Compositions ◽  
Physical Strength

Eucalyptus dunii has been commercially used in southern Brazil because of its relatively good frost tolerance and adequate productivity in the winter months. More recently, interest has grown in cultivating Eucalyptus benthamii Maiden & Cambage, which presents even superior frost tolerance compared to E. dunii and is highly productive as well. The quality of E. benthamii for pulp production is not yet proven. Thus, the chemical, anatomical, and technological aspects of pulp made from E. benthamii were compared with those of E. dunii for unbleached paper production. Samples of E. benthamii chips were obtained and analyzed for their basic density, chemical composition, higher heating value, trace elemental analysis, and chip size distribution. The chips were kraft cooked using conditions that produced a 74 ± 6 kappa number. The pulps were characterized for kappa number, yield, viscosity, and morphologic characteristics (e.g., length, wall thickness, and coarseness). Black liquor was analyzed for total solids, organics, inorganics, sodium sulfide, sodium hydroxide, and sodium carbonate. Brownstocks were beaten at five different energy levels in a Valley beater, and the physical strength properties of 120 g/m² handsheets were measured to develop a beater curve. The results of this study showed differences in delignification between the two woods and lower pulp yield for E. benthamii , which are related to their chemical compositions and basic densities. The E. benthamii studied in this work exhibited higher amounts of lignin and extractives, lower carbohydrate content, and lower basic density. However, cooking a blend of the two woods afforded good results in pulping and in physical pulp properties.

Phosphorus minerals in tonstein; coal seam 405 at Sośnica-Makoszowy coal mine, Upper Silesia, southern Poland

2013 ◽  
Vol 63 (2) ◽  
pp. 271-281 ◽  
Author(s):  
Magdalena Kokowska-Pawłowska ◽  
Jacek Nowak
Keyword(s):  
Trace Elements ◽  
Coal Seam ◽  
Mineral Composition ◽  
Coal Mine ◽  
Chemical Compositions ◽  
Coal Basin ◽  
Upper Silesia ◽  
Southern Poland ◽  
Basin Area

Abstract Kokowska-Pawłowska, M. and Nowak, J. 2013. Phosphorus minerals in tonstein; coal seam 405 at Sośnica- Makoszowy coal mine, Upper Silesia, southern Poland. Acta Geologica Polonica, 63 (2), 271-281. Warszawa. The paper presents results of research on tonstein, which constitutes an interburden in coal seam 405 at the Sośnica- Makoszowy coal mine, Makoszowy field (mining level 600 m), Upper Silesia, southern Poland. The mineral and chemical compositions of the tonstein differ from the typical compositions described earlier for tonsteins from Upper Silesia Coal Basin area. Additionally, minerals present in the tonsteins include kaolinite, quartz, kaolinitised biotite and feldspars. The presence of the phosphatic minerals apatite and goyazite has been recognized. The presence of gorceixite and crandallite is also possible. The contents of CaO (5.66 wt%) and P2O5 (6.2 wt%) are remarkably high. Analysis of selected trace elements demonstrated high contents of Sr (4937 ppm) and Ba (4300 ppm), related to the phosphatic minerals. On the basis of mineral composition the tonstein has been identified as a crystalline tonstein, transitional to a multiplied one.

Spectro-mechanical Characterization of Aromaticity and Maturity of Kerogens in Oil Shale at 6 nm Spatial Resolution

2018 ◽  
Author(s):  
Devon Jakob ◽  
Le Wang ◽  
Haomin Wang ◽  
Xiaoji Xu
Keyword(s):  
Spatial Resolution ◽  
Oil Shale ◽  
Infrared Imaging ◽  
Mechanical Characterization ◽  
Optical Diffraction ◽  
Chemical Compositions ◽  
Valuable Insight ◽  
Eagle Ford Shale

<p>In situ measurements of the chemical compositions and mechanical properties of kerogen help understand the formation, transformation, and utilization of organic matter in the oil shale at the nanoscale. However, the optical diffraction limit prevents attainment of nanoscale resolution using conventional spectroscopy and microscopy. Here, we utilize peak force infrared (PFIR) microscopy for multimodal characterization of kerogen in oil shale. The PFIR provides correlative infrared imaging, mechanical mapping, and broadband infrared spectroscopy capability with 6 nm spatial resolution. We observed nanoscale heterogeneity in the chemical composition, aromaticity, and maturity of the kerogens from oil shales from Eagle Ford shale play in Texas. The kerogen aromaticity positively correlates with the local mechanical moduli of the surrounding inorganic matrix, manifesting the Le Chatelier’s principle. In situ spectro-mechanical characterization of oil shale will yield valuable insight for geochemical and geomechanical modeling on the origin and transformation of kerogen in the oil shale.</p>

Renewable Diesel Blendstocks and Biopriviliged Chemicals Distilled from Algal Biocrude Oil Converted via Hydrothermal Liquefaction

2019 ◽  
Author(s):  
Wan-Ting (Grace) Chen ◽  
Zhenwei Wu ◽  
Buchun Si ◽  
Yuanhui Zhang
Keyword(s):  
Oxidation Stability ◽  
Ash Content ◽  
Hydrothermal Liquefaction ◽  
Fractional Distillation ◽  
Chemical Compositions ◽  
Steam Temperature ◽  
Renewable Diesel ◽  
Commodity Chemicals ◽  
Biocrude Oil ◽  
Specification Analysis

This study aims to produce renewable diesel and biopriviliged chemicals from microalgae that can thrive in wastewater environment. <i>Spirulina</i> (SP) was converted into biocrude oil at 300ºC for a 30-minute reaction time via hydrothermal liquefaction (HTL). Next, fractional distillation was used to separate SP-derived biocrude oil into different distillates. It was found that 62% of the viscous SP-derived biocrude oil can be separated into liquids at about 270ºC (steam temperature of the distillation). Physicochemical characterizations, including density, viscosity, acidity, elemental compositions, higher heating values and chemical compositions, were carried out with the distillates separated from SP-derived biocrude oil. These analyses showed that 15% distillates could be used as renewable diesel because they have similar heating values (43-46 MJ/kg) and carbon numbers (ranging from C8 to C18) to petroleum diesel. The Van Krevelan diagram of the distillates suggests that deoxygenation was effectively achieved by fractional distillation. In addition, GC-MS analysis indicates that some distillates contain biopriviliged chemicals like aromatics, phenols and fatty nitriles that can be used as commodity chemicals. An algal biorefinery roadmap was proposed based on the analyses of different distillates from the SP-derived biocrude oil. Finally, the fuel specification analysis was conducted with the drop-in renewable diesel, which was prepared with 10 vol.% (HTL10) distillates and 90 vol.% petroleum diesel. According to the fuel specification analysis, HTL10 exhibited a qualified lubricity (<520 µm), acidity (<0.3 mg KOH/g) and oxidation stability (>6 hr), as well as a comparable net heat of combustion (1% lower), ash content (29% lower) and viscosity (17% lower) to those of petroleum diesel. Ultimately, it is expected that this study can provide insights for potential application of algal biocrude oil converted via HTL.

Sign in / Sign up

Export Citation Format

Share Document