scholarly journals Study on the performance of a MOF-808-based photocatalyst prepared by a microwave-assisted method for the degradation of antibiotics

RSC Advances ◽  
2021 ◽  
Vol 11 (52) ◽  
pp. 32955-32964
Author(s):  
Fangwai Wang ◽  
Ruixue Xue ◽  
Yujie Ma ◽  
Yizhao Ge ◽  
Zijun Wang ◽  
...  
Keyword(s):  
Specific Surface ◽  
Surface Area ◽  
Specific Surface Area ◽  
High Stability ◽  
Large Specific Surface Area ◽  
Simple Method ◽  
Microwave Assisted ◽  
Microwave Assisted Method

In this paper, a simple method was used to rapidly prepare MOF-808 with a large specific surface area and high stability.

scholarly journals Preparation of Lignin-Based Carbon Materials and Its Application as a Sorbent

Materials ◽  
2019 ◽  
Vol 12 (7) ◽  
pp. 1111 ◽  
Author(s):  
Ling-Yan Meng ◽  
Ming-Guo Ma ◽  
Xing-Xiang Ji
Keyword(s):  
Activated Carbon ◽  
Specific Surface ◽  
Surface Area ◽  
Specific Surface Area ◽  
Uv Irradiation ◽  
Carbon Materials ◽  
Synthetic Methods ◽  
Ultrasound Method ◽  
Microwave Assisted ◽  
Microwave Assisted Method

The purpose of this article was to explore the influences of synthetic methods on the lignin-based carbon materials. In this paper, the lignin-based activated carbon materials were comparatively researched in ZnCl2 solution using various methods, including the microwave-assisted method, ultrasound method, and UV irradiation method, respectively. Scanning electron microscopy (SEM), Fourier transform infrared spectrometry (FT-IR), thermogravimetric analysis (TGA), and differential thermal analysis (DTA) were used to characterize the as-prepared samples. The effects of the synthetic parameters including the types of lignin, activated solution concentration, types of activated solution, and synthetic methods on the morphologies, thermal stability, and specific surface area of samples were comparatively investigated in detail. The specific surface area of lignin-based activated carbon increased to 473.8, 765.3, and 211.2 m2∙g−1 using the microwave-assisted method, ultrasound method, and UV irradiation method, respectively, compared with that of the control (113.4 m2∙g−1). The lignin-based carbon materials displayed the enhanced absorptive capacity, compared with that of the control. These novel synthetic methods reported here maybe have a guiding significance for the synthesis of carbon materials using the lignin as precursors.

Influence of Pressure to Morphology of TiO2 Nanofibers Prepared by Microwave-Assisted Synthesis Method

2019 ◽  
Vol 800 ◽  
pp. 132-137
Author(s):  
Reinis Drunka ◽  
Jānis Grabis ◽  
Aija Krumina
Keyword(s):  
Hydrothermal Synthesis ◽  
Specific Surface ◽  
Surface Area ◽  
Specific Surface Area ◽  
Synthesis Method ◽  
Microwave Assisted Synthesis ◽  
Large Specific Surface Area ◽  
High Quality ◽  
Microwave Assisted ◽  
Temperature And Pressure

Microwave-assisted hydrothermal synthesis of TiO2 nanofibers under various temperature and pressure conditions were done in this research. High quality TiO2 nanofiber coatings where obtained when temperature was in range 240 – 245 °C and pressure was 27.3 – 29.1 bar. Obtained TiO2 nanofiber coatings are with a specific surface area of ​​151.5 to 158.9 m2· g-1 before calcination. Comparing with nanopowder photocatalysts nanofiber coatings photocatalysts can be much easier removed from solution after the photocatalysis process. Such coatings with relative large specific surface area are with higher potential application in industry.

scholarly journals Nanocomposite Materials Based on Electrochemically Synthesized Graphene Polymers: Molecular Architecture Strategies for Sensor Applications

Chemosensors ◽  
2021 ◽  
Vol 9 (6) ◽  
pp. 149
Author(s):  
André Olean-Oliveira ◽  
Gilberto A. Oliveira Brito ◽  
Celso Xavier Cardoso ◽  
Marcos F. S. Teixeira
Keyword(s):  
Conducting Polymers ◽  
Specific Surface ◽  
Surface Area ◽  
Specific Surface Area ◽  
Electrochemical Sensors ◽  
Structural Characteristics ◽  
Low Cost ◽  
Large Specific Surface Area ◽  
Molecular Architecture ◽  
Sensor Applications

The use of graphene and its derivatives in the development of electrochemical sensors has been growing in recent decades. Part of this success is due to the excellent characteristics of such materials, such as good electrical and mechanical properties and a large specific surface area. The formation of composites and nanocomposites with these two materials leads to better sensing performance compared to pure graphene and conductive polymers. The increased large specific surface area of the nanocomposites and the synergistic effect between graphene and conducting polymers is responsible for this interesting result. The most widely used methodologies for the synthesis of these materials are still based on chemical routes. However, electrochemical routes have emerged and are gaining space, affording advantages such as low cost and the promising possibility of modulation of the structural characteristics of composites. As a result, application in sensor devices can lead to increased sensitivity and decreased analysis cost. Thus, this review presents the main aspects for the construction of nanomaterials based on graphene oxide and conducting polymers, as well as the recent efforts made to apply this methodology in the development of sensors and biosensors.

Three-dimensional graphene encapsulated hollow CoSe2-SnSe2 nanoboxes for high performance asymmetric supercapacitors

2022 ◽  
Author(s):  
Kainan Li ◽  
Ke Zheng ◽  
Zhifang Zhang ◽  
Kuan Li ◽  
Ziyao Bian ◽  
...  
Keyword(s):  
Electrochemical Performance ◽  
Specific Surface ◽  
Surface Area ◽  
Specific Surface Area ◽  
Active Sites ◽  
Specific Capacity ◽  
Three Dimensional ◽  
Hollow Structure ◽  
Large Specific Surface Area ◽  
Composite Aerogel

Abstract Construction of metal selenides with a large specific surface area and a hollow structure is one of the effective methods to improve the electrochemical performance of supercapacitors. However, the nano-material easily agglomerates due to the lack of support, resulting in the loss of electrochemical performance. Herein, we successfully design a three-dimensional graphene (3DG) encapsulation-protected hollow nanoboxes (CoSe2-SnSe2) composite aerogel (3DG/CoSe2-SnSe2) via a co-precipitation method coupled with self-assembly route, followed by a high temperature selenidation strategy. The obtained aerogel possesses porous 3DG conductive network, large specific surface area and plenty of reactive active sites. It could be used as a flexible and binder-free electrode after a facile mechanical compression process, which provided a high specific capacitance of 460 F g-1 at 0.5 A g-1, good rate capability of 212.7 F g-1 at 10 A g-1, and excellent cycle stability due to the fast electron/ion transfer and electrolyte diffusion. With the as-prepared 3DG/CoSe2-SnSe2 as positive electrodes and the AC (activated carbon) as negative electrodes, an asymmetric supercapacitor (3DG/CoSe2-SnSe2//AC) was fabricated, which delivered a high specific capacity of 38 F g-1 at 1A g-1 and an energy density of 11.89 W h kg-1 at 749.9 W kg-1, as well as a capacitance retention of 91.1% after 3000 cycles. This work provides a new method for preparing electrode material.

In-situ controlled synthesis of NiFe MOF materials with excellent electrocatalytic performances for water splitting

2021 ◽  
Vol 14 (02) ◽  
pp. 2151011
Author(s):  
Jingwen Jia ◽  
Longfu Wei ◽  
Ziting Guo ◽  
Fang Li ◽  
Changlin Yu ◽  
...  
Keyword(s):  
Specific Surface ◽  
Surface Area ◽  
Water Splitting ◽  
Specific Surface Area ◽  
High Performance ◽  
Alkaline Condition ◽  
High Porosity ◽  
Large Specific Surface Area ◽  
Electrocatalytic Performance

Metal–organic frameworks (MOFs) are the electrocatalytic materials with large specific surface area, high porosity, controllable structure and monodisperse active center, which is a promising candidate for the application of electrochemical energy conversion. However, the electrocatalytic performance of pure MOFs is seriously limited its poor conductivity and stability. In this work, high-performance electrocatalyst was fabricated through combining NiFe/MOF on nickel foam (NF) via in-situ growth strategy. Through rational control of the time and ratio in reaction precursors, we realized the effective manipulation of the growth behavior, and further investigated the electrocatalytic performance in water splitting. The catalyst presented excellent electrocatalytic performance for water splitting, with low overpotential of 260 mV in alkaline condition at a current density of 50 mA[Formula: see text], which is benefited from the large specific surface area and active sites. This study demonstrates that the rational design of NiFe MOF/NF plays a significant role in high-performance electrocatalyst.

Sign in / Sign up

Export Citation Format

Share Document