scholarly journals Experimental study on the degradation mechanism of LaCoO3-based symmetric supercapacitors

RSC Advances ◽  
2021 ◽  
Vol 11 (41) ◽  
pp. 25170-25178
Author(s):  
Xu Chen ◽  
Qiwei Su ◽  
Jipan Yu ◽  
Mingrui Wei ◽  
Guanlun Guo ◽  
...  
Keyword(s):  
Experimental Study ◽  
Photoelectron Spectroscopy ◽  
Electrode Surface ◽  
Valence State ◽  
Degradation Mechanism ◽  
Active Material ◽  
X Ray ◽  
Before And After ◽  
Surface Active ◽  
Surface Active Material

Cycling tests for LaCoO3-based symmetric supercapacitors were carried out. The change in the valence state of Co in the electrode surface active material, LaCoO3, before and after the cycling test was investigated by X-ray photoelectron spectroscopy.

scholarly journals Synthesis of Novel Arginine-Based Flame Retardant and Its Application in Lyocell Fabric

Molecules ◽  
2021 ◽  
Vol 26 (12) ◽  
pp. 3588
Author(s):  
Jiayi Chen ◽  
Yansong Liu ◽  
Jiayue Zhang ◽  
Yuanlin Ren ◽  
Xiaohui Liu
Keyword(s):  
Fourier Transform ◽  
Heat Release ◽  
Flame Retardant ◽  
Photoelectron Spectroscopy ◽  
Fourier Transform Infrared ◽  
Ftir Analysis ◽  
Excellent Thermal Stability ◽  
X Ray ◽  
Cone Calorimeter Test ◽  
Before And After

Lyocell fabrics are widely applied in textiles, however, its high flammability increases the risk of fire. Therefore, to resolve the issue, a novel biomass-based flame retardant with phosphorus and nitrogen elements was designed and synthesized by the reaction of arginine with phosphoric acid and urea. It was then grafted onto the lyocell fabric by a dip-dry-cure technique to prepare durable flame-retardant lyocell fabric (FR-lyocell). X-ray photoelectron spectroscopy (XPS) and Fourier-transform infrared spectroscopy (FTIR) analysis demonstrated that the flame retardant was successfully introduced into the lyocell sample. Thermogravimetric (TG) and Raman analyses confirmed that the modified lyocell fabric featured excellent thermal stability and significantly increased char residue. Vertical combustion results indicated that FR-lyocell before and after washing formed a complete and dense char layer. Thermogravimetric Fourier-transform infrared (TG-FTIR) analysis suggested that incombustible substances (such as H2O and CO2) were produced and played a significant fire retarding role in the gas phase. The cone calorimeter test corroborated that the peak of heat release rate (PHRR) and total heat release (THR) declined by 89.4% and 56.4%, respectively. These results indicated that the flame retardancy of the lyocell fabric was observably ameliorated.

scholarly journals Efficient Removal of Levofloxacin by Activated Persulfate with Magnetic CuFe2O4/MMT-k10 Nanocomposite: Characterization, Response Surface Methodology, and Degradation Mechanism

Water ◽  
2020 ◽  
Vol 12 (12) ◽  
pp. 3583
Author(s):  
Junying Yang ◽  
Minye Huang ◽  
Shengsen Wang ◽  
Xiaoyun Mao ◽  
Yueming Hu ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Response Surface Methodology ◽  
Response Surface ◽  
Photoelectron Spectroscopy ◽  
Degradation Mechanism ◽  
Sol Gel ◽  
Combustion Method ◽  
Copper Ferrite ◽  
X Ray ◽  
Rsm Model

In this study, a magnetic copper ferrite/montmorillonite-k10 nanocomposite (CuFe2O4/MMT-k10) was successfully fabricated by a simple sol-gel combustion method and was characterised by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), the Brunner–Emmett–Teller (BET) method, vibrating sample magnetometer (VSM), and X-ray photoelectron spectroscopy (XPS). For levofloxacin (LVF) degradation, CuFe2O4/MMT-k10 was utilized to activate persulfate (PS). Due to the relative high adsorption capacity of CuFe2O4/MMT-k10, the adsorption feature was considered an enhancement of LVF degradation. In addition, the response surface methodology (RSM) model was established with the parameters of pH, temperature, PS dosage, and CuFe2O4/MMT-k10 dosage as the independent variables to obtain the optimal response for LVF degradation. In cycle experiments, we identified the good stability and reusability of CuFe2O4/MMT-k10. We proposed a potential mechanism of CuFe2O4/MMT-k10 activating PS through free radical quenching tests and XPS analysis. These results reveal that CuFe2O4/MMT-k10 nanocomposite could activate the persulfate, which is an efficient technique for LVF degradation in water.

Letter to the Editor

PEDIATRICS ◽  
1974 ◽  
Vol 54 (4) ◽  
pp. 519-519
Keyword(s):  
Amniotic Fluid ◽  
Active Material ◽  
Hyaline Membrane Disease ◽  
Clinical Entity ◽  
Letter To The Editor ◽  
Hyaline Membrane ◽  
Surface Active ◽  
Surface Active Material

Dr. Stevenson's observations concerning the association of amniotic fluid aspiration and hyaline membrane disease is quite interesting. Very little work, that we are aware of, has been done since these articles were published (1955 to 1958) to follow tip this theory. However, much work has been done to clarify the etiology of hyaline membrane disease. It is now well accepted that this clinical entity is directly related to the degree of immaturity of the lungs and the presence or absence of surface active material.

Oxidation of Alloy-X in Subcritical, Transition, and Supercritical Water

CORROSION ◽  
10.5006/3881 ◽  
2021 ◽  
Author(s):  
Zachary Karmiol ◽  
Dev Chidambaram
Keyword(s):  
Supercritical Water ◽  
Photoelectron Spectroscopy ◽  
Focused Ion Beam ◽  
Elevated Temperatures ◽  
Subcritical Water ◽  
Ion Beam ◽  
X Ray Diffraction ◽  
X Ray ◽  
Nickel Based Superalloy ◽  
Before And After

This work investigates the oxidation of a nickel based superalloy, namely Alloy X, in water at elevated temperatures: subcritical water at 261°C and 27 MPa, the transition between subcritical and supercritical water at 374°C and 27 MPa, and supercritical water at 380°C and 27 MPa for 100 hours. The morphology of the sample surfaces were studied using scanning electron microscopy coupled with focused ion beam milling, and the surface chemistry was investigated using X-ray diffraction, Raman spectroscopy, energy dispersive X-ray spectroscopy, and X-ray photoelectron spectroscopy before and after exposure studies. Surfaces of all samples were identified to comprise of a ferrite spinel containing aluminum.

scholarly journals Facile Preparation of Rod-like MnO Nanomixtures via Hydrothermal Approach and Highly Efficient Removal of Methylene Blue for Wastewater Treatment

Nanomaterials ◽  
2018 ◽  
Vol 9 (1) ◽  
pp. 10 ◽  
Author(s):  
Yuelong Xu ◽  
Bin Ren ◽  
Ran Wang ◽  
Lihui Zhang ◽  
Tifeng Jiao ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Methylene Blue ◽  
Photoelectron Spectroscopy ◽  
Degradation Mechanism ◽  
Dye Adsorption ◽  
Maximum Adsorption Capacity ◽  
X Ray ◽  
Transmission Electron ◽  
Degradation Ratio ◽  
Hydrothermal Approach

In the present study, nanoscale rod-shaped manganese oxide (MnO) mixtures were successfully prepared from graphitic carbon nitride (C3N4) and potassium permanganate (KMnO4) through a hydrothermal method. The as-prepared MnO nanomixtures exhibited high activity in the adsorption and degradation of methylene blue (MB). The as-synthesized products were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), surface area analysis, X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). Furthermore, the effects of the dose of MnO nanomixtures, pH of the solution, initial concentration of MB, and the temperature of MB removal in dye adsorption and degradation experiments was investigated. The degradation mechanism of MB upon treatment with MnO nanomixtures and H2O2 was studied and discussed. The results showed that a maximum adsorption capacity of 154 mg g−1 was obtained for a 60 mg L−1 MB solution at pH 9.0 and 25 °C, and the highest MB degradation ratio reached 99.8% under the following optimum conditions: 50 mL of MB solution (20 mg L−1) at room temperature and pH ≈ 8.0 with 7 mg of C, N-doped MnO and 0.5 mL of H2O2.

336. Surface activity and proteins of milk

1946 ◽  
Vol 14 (3) ◽  
pp. 316-329 ◽  
Author(s):  
R. Aschaffenburg
Keyword(s):  
Milk Fat ◽  
Chemical Nature ◽  
Active Material ◽  
Milk Proteins ◽  
Residual Fraction ◽  
Total Milk ◽  
Surface Active ◽  
Surface Active Material ◽  
Dilution Curves

As moderate dilution causes little change in the surface tension of milk, it is shown to be advantageous to use σ-dilution curves in place of the σ-values of the undiluted fluid as a characteristic of the surface properties of milk. The complications arising from the presence of the milk fat are described, and it is suggested that the influence of the fat is of a physical rather than of a chemical nature. A study of the role of the various milk proteins shows the casein to be of great importance, whilst the heat-coagulable proteins have little influence. The serum obtained after removal of the casein and heat-coagulable proteins contains a residual fraction of protein-like material which is markedly surface active though constituting only about 3% of the total milk proteins. The surface-active material (σ-proteose) has been concentrated and isolated, and its properties are described in some detail.

Isolation and assay of dipalmityl lecithin in lung extracts

1964 ◽  
Vol 207 (2) ◽  
pp. 402-406 ◽  
Author(s):  
Elwyn S. Brown
Keyword(s):  
Phosphatidyl Choline ◽  
Trichloroacetic Acid ◽  
Cadmium Chloride ◽  
Active Material ◽  
Weight Basis ◽  
Alcohol Extract ◽  
Wet Weight ◽  
Surface Active ◽  
Surface Active Material ◽  
Surface Balance

Lung extracts were obtained by either mincing the lungs in saline or by washing the lung with saline through the trachea. The surface tensions of the extracts on compression to 10% of the original area in a surface balance decreased to 7.5 ± 2.1 dynes/cm for rabbits, 10.0 ± 1.8 dynes/cm for dogs, and 6.8 ± 3.8 dynes/cm for man. The surface-active material in the extracts was completely precipitated with trichloroacetic acid. Ethyl or methyl alcohol extracted the activity from the precipitate. By concentrating and chilling the alcohol extract, a very surface-active white precipitate was obtained which was identified as dipalmityl phosphatidyl choline by melting point, chemical analysis, and paper chromatography. Cadmium chloride also precipitated a surface-active complex from the alcohol extract which was identified chemically as dipalmityl phosphatidyl choline. The quantity of hydrolecithin extracted from the lungs was 0.09–0.18% on a wet weight basis. No evidence of the presence of sphingomyelin or other surface-active phospholipid was obtained.

Characterization of X-ray irradiated graphene oxide coatings using X-ray diffraction, X-ray photoelectron spectroscopy, and atomic force microscopy

2013 ◽  
Vol 28 (2) ◽  
pp. 68-71 ◽  
Author(s):  
Thomas N. Blanton ◽  
Debasis Majumdar
Keyword(s):  
Atomic Force Microscopy ◽  
Graphene Oxide ◽  
Photoelectron Spectroscopy ◽  
High Energy ◽  
X Ray Diffraction ◽  
Carbon Phase ◽  
X Ray ◽  
Force Microscopy ◽  
Atomic Force ◽  
Before And After

In an effort to study an alternative approach to make graphene from graphene oxide (GO), exposure of GO to high-energy X-ray radiation has been performed. X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and atomic force microscopy (AFM) have been used to characterize GO before and after irradiation. Results indicate that GO exposed to high-energy radiation is converted to an amorphous carbon phase that is conductive.

Sign in / Sign up

Export Citation Format

Share Document