Flexible Triboelectric Nanogenerator Based on Polyester Conductive Cloth for Biomechanical Energy Harvesting and Self-Powered Sensors

Nanoscale ◽  
2021 ◽  
Author(s):  
Junwei Zhao ◽  
Yujiang Wang ◽  
Xiaojiang Song ◽  
Anqi Zhou ◽  
Yunfei Ma ◽  
...  
Keyword(s):  
Energy Harvesting ◽  
Mechanical Energy ◽  
Low Frequency ◽  
Triboelectric Nanogenerator ◽  
Self Powered

As a new nanotechnology of mechanical energy harvesting and self-powered sensing, triboelectric nanogenerator (TENG) has been explored as a new path of using various low-frequency disordered mechanical energies in the...

scholarly journals A Spherical Hybrid Triboelectric Nanogenerator for Enhanced Water Wave Energy Harvesting

Micromachines ◽  
2018 ◽  
Vol 9 (11) ◽  
pp. 598 ◽  
Author(s):  
Kwangseok Lee ◽  
Jeong-won Lee ◽  
Kihwan Kim ◽  
Donghyeon Yoo ◽  
Dong Kim ◽  
...  
Keyword(s):  
Energy Harvesting ◽  
Water Waves ◽  
Water Wave ◽  
Degrees Of Freedom ◽  
Low Frequency ◽  
Random Motion ◽  
Triboelectric Nanogenerator ◽  
Hybrid Energy ◽  
Pollution Levels ◽  
Self Powered

Water waves are a continuously generated renewable source of energy. However, their random motion and low frequency pose significant challenges for harvesting their energy. Herein, we propose a spherical hybrid triboelectric nanogenerator (SH-TENG) that efficiently harvests the energy of low frequency, random water waves. The SH-TENG converts the kinetic energy of the water wave into solid–solid and solid–liquid triboelectric energy simultaneously using a single electrode. The electrical output of the SH-TENG for six degrees of freedom of motion in water was investigated. Further, in order to demonstrate hybrid energy harvesting from multiple energy sources using a single electrode on the SH-TENG, the charging performance of a capacitor was evaluated. The experimental results indicate that SH-TENGs have great potential for use in self-powered environmental monitoring systems that monitor factors such as water temperature, water wave height, and pollution levels in oceans.

Triboelectric nanogenerators as new energy technology and self-powered sensors – Principles, problems and perspectives

2014 ◽  
Vol 176 ◽  
pp. 447-458 ◽  
Author(s):  
Zhong Lin Wang
Keyword(s):  
Energy Harvesting ◽  
Charge Density ◽  
Energy Conversion ◽  
Daily Life ◽  
Mechanical Energy ◽  
Ocean Waves ◽  
Human Motion ◽  
Triboelectric Nanogenerator ◽  
Standard Material ◽  
Self Powered

Triboelectrification is one of the most common effects in our daily life, but it is usually taken as a negative effect with very limited positive applications. Here, we invented a triboelectric nanogenerator (TENG) based on organic materials that is used to convert mechanical energy into electricity. The TENG is based on the conjunction of triboelectrification and electrostatic induction, and it utilizes the most common materials available in our daily life, such as papers, fabrics, PTFE, PDMS, Al, PVCetc.In this short review, we first introduce the four most fundamental modes of TENG, based on which a range of applications have been demonstrated. The area power density reaches 1200 W m−2, volume density reaches 490 kW m−3, and an energy conversion efficiency of ∼50–85% has been demonstrated. The TENG can be applied to harvest all kinds of mechanical energy that is available in our daily life, such as human motion, walking, vibration, mechanical triggering, rotation energy, wind, a moving automobile, flowing water, rain drops, tide and ocean waves. Therefore, it is a new paradigm for energy harvesting. Furthermore, TENG can be a sensor that directly converts a mechanical triggering into a self-generated electric signal for detection of motion, vibration, mechanical stimuli, physical touching, and biological movement. After a summary of TENG for micro-scale energy harvesting, mega-scale energy harvesting, and self-powered systems, we will present a set of questions that need to be discussed and explored for applications of the TENG. Lastly, since the energy conversion efficiencies for each mode can be different although the materials are the same, depending on the triggering conditions and design geometry. But one common factor that determines the performance of all the TENGs is the charge density on the two surfaces, the saturation value of which may independent of the triggering configurations of the TENG. Therefore, the triboelectric charge density or the relative charge density in reference to a standard material (such as polytetrafluoroethylene (PTFE)) can be taken as a measuring matrix for characterizing the performance of the material for the TENG.

Harvesting Energy of Body Motion Through Single Electrode Based Self-Powered Triboelectric Nanogenerator

2019 ◽  
Vol 14 (11) ◽  
pp. 1572-1581 ◽  
Author(s):  
Shamsuddin ◽  
Saeed Ahmed Khan ◽  
Ahmed Ali ◽  
Abdul Qadir Rahimoon ◽  
Palwasha Jalalzai
Keyword(s):  
Energy Harvesting ◽  
Human Skin ◽  
Mechanical Energy ◽  
Short Circuit ◽  
Copper Acetate ◽  
Body Motion ◽  
Triboelectric Nanogenerator ◽  
Wearable Electronics ◽  
Silicon Rubber ◽  
Self Powered

A self-powered mechanical energy harvesting system consists of the storage system and the energy scavenging TENG. Triboelectric nanogenerator includes a system which integrates a self-powered sensor and the power generator, this triboelectric nanogenerator has the potential to be used in a modern wearable electronic TENG. It has been reported that triboelectric nanogenerator working under complicated deformation like bending, stretching and twisting brings the main problem. Here we have fabricated the shape adaptive Triboelectric nanogenerator which solves all the deformation issues and can harvest the mechanical energy through human body motion in any deformation, the fabricated TENG is a self-powered sensor which can sense the different human activities and can monitor the health issues, the TENG stores the energy directly to the capacitor for powering the wearable electronics. A human skin based triboelectric nanogenerator was designed from the silicon rubber and the copper acetate-II used as the electrode, which makes the TENG flexible self-powered sensor, it can be stretched up to 200%. The stretchable nature and the flexibility of the human skin based silicon rubber triboelectric nanogenerator makes it the promising flexible and shape-adaptive energy harvesting TENG. The fabricated TENG generated the open circuit voltage 70 V and the short circuit current 11 μA and delivered the power 55 μW at the load of 80 MΩ. 42 LEDs were powered directly from the TENG. The fabricated TENG has human skin tactile property which does not harm the human skin while using it multiple times. The layer of copper acetate is completely coated with silicone rubber. The fabricated TENG is flexible, biocompatible and cost effective.

Single-electrode triboelectric nanogenerators based on sponge-like porous PTFE thin films for mechanical energy harvesting and self-powered electronics

2017 ◽  
Vol 5 (24) ◽  
pp. 12252-12257 ◽  
Author(s):  
Meng Wang ◽  
Nan Zhang ◽  
Yingjie Tang ◽  
Heng Zhang ◽  
Chuan Ning ◽  
...  
Keyword(s):  
Thin Films ◽  
Energy Harvesting ◽  
Mechanical Energy ◽  
Triboelectric Nanogenerator ◽  
Self Powered ◽  
Triboelectric Nanogenerators

A single-electrode triboelectric nanogenerator (S-TENG) based on sponge-like porous polytetrafluoroethylene (PTFE) thin films was developed.

scholarly journals Walking energy harvesting and self-powered tracking system based on triboelectric nanogenerators

2020 ◽  
Vol 11 ◽  
pp. 1590-1595
Author(s):  
Mingliang Yao ◽  
Guangzhong Xie ◽  
Qichen Gong ◽  
Yuanjie Su
Keyword(s):  
Energy Consumption ◽  
Energy Harvesting ◽  
Smart Cities ◽  
Tracking System ◽  
Mechanical Energy ◽  
Short Circuit ◽  
Triboelectric Nanogenerator ◽  
Low Carbon ◽  
Public Areas ◽  
Self Powered

Due to the extensive energy consumption and high population density in modern cities, the collection and use of scattered walking energy from the stream of people is crucial for the development of a green ecological city. Herein, a flexible undulated electrode-based triboelectric nanogenerator (u-TENG) was integrated to the floor to scavenge walking energy from pedestrians, promoting the ordered collection of disordered and scattered energy. Driven by the steps of human walking, the output of the as-fabricated u-TENG are an open-circuit voltage of 86 V and a short-circuit current of 6.2 μA, which are able to continuously light up 110 light-emitting diode bulbs. In addition, a self-powered location-tracking system was prepared for pedestrian volume counting and passenger tracing with the purpose of reducing energy consumption in public areas. The proposed walking energy harvesting device is flexible, feasible, and unaffected by season, climate, or location. This work not only proposes a strategy for mechanical energy harvesting in public areas, including subway stations, hospitals, shopping malls, and business streets, but also offers a novel solution for smart cities and low-carbon transportation alternatives.

scholarly journals A Tubular Flexible Triboelectric Nanogenerator with a Superhydrophobic Surface for Human Motion Detecting

Sensors ◽  
2021 ◽  
Vol 21 (11) ◽  
pp. 3634
Author(s):  
Jianwei Wang ◽  
Zhizhen Zhao ◽  
Xiangwen Zeng ◽  
Xiyu Liu ◽  
Youfan Hu
Keyword(s):  
Energy Harvesting ◽  
Flexible Electronics ◽  
Superhydrophobic Surface ◽  
Mechanical Energy ◽  
Construction Material ◽  
Human Motion ◽  
Triboelectric Nanogenerator ◽  
Free Standing ◽  
Self Powered ◽  
Human Motion Monitoring

The triboelectric nanogenerator (TENG) is a newly arisen technology for mechanical energy harvesting from the environment, such as raindrops, wind, tides, and so on. It has attracted widespread attention in flexible electronics to serve as self-powered sensors and energy-harvesting devices because of its flexibility, durability, adaptability, and multi-functionalities. In this work, we fabricated a tubular flexible triboelectric nanogenerator (TF-TENG) with energy harvesting and human motion monitoring capabilities by employing polydimethylsiloxane (PDMS) as construction material, and fluorinated ethylene propylene (FEP) films coated with Cu as the triboelectric layer and electrode, serving in a free-standing mode. The tube structure has excellent stretchability that can be stretched up to 400%. Modifying the FEP films to obtain a superhydrophobic surface, the output performance of TF-TENG was increased by at least 100% compared to an untreated one. Finally, as the output of TF-TENG is sensitive to swing angle and frequency, demonstration of real-time monitoring of human motion state was realized when a TF-TENG was worn on the wrist.

Triboelectric Nanogenerator using Multiferroic Materials: An Approach for Energy Harvesting and Self-Powered Magnetic Field Detection

Nano Energy ◽  
2021 ◽  
pp. 105964
Author(s):  
Sugato Hajra ◽  
Venkateswaran Vivekananthan ◽  
Manisha Sahu ◽  
Gaurav Khandelwal ◽  
Nirmal Prashanth Maria Joseph Raj ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Energy Harvesting ◽  
Triboelectric Nanogenerator ◽  
Multiferroic Materials ◽  
Field Detection ◽  
Self Powered
Sign in / Sign up

Export Citation Format

Share Document