Frequency stable dielectric constant with reduced dielectric loss of one-dimensional ZnO–ZnS heterostructures

Nanoscale ◽  
2021 ◽  
Author(s):  
Amina Zafar ◽  
Muhammad Younas ◽  
Syeda Arooj Fatima ◽  
Lizhi Qian ◽  
Yanguo Liu ◽  
...  
Keyword(s):  
Dielectric Constant ◽  
Dielectric Loss ◽  
Dielectric Response ◽  
One Dimensional ◽  
Large Polaron

ZnO–ZnS heterostructure is developed which shows frequency stable dielectric response at ≥103 Hz due to coupling of the bare charges in the form of overlapping large polaron and Zn2+–VO dipoles present at ZnO–ZnS heterostructure interface.

Adiabatic large polarons in anisotropic molecular crystals

2011 ◽  
Vol 35 (1) ◽  
pp. 15-27
Author(s):  
Zoran Ivić ◽  
Željko Pržulj
Keyword(s):  
Energy Transfer ◽  
Effective Mass ◽  
Molecular Crystals ◽  
Single Chain ◽  
Proper Understanding ◽  
One Dimensional ◽  
Interchain Coupling ◽  
Large Polaron ◽  
The One

Adiabatic large polarons in anisotropic molecular crystals We study the large polaron whose motion is confined to a single chain in a system composed of the collection of parallel molecular chains embedded in threedimensional lattice. It is found that the interchain coupling has a significant impact on the large polaron characteristics. In particular, its radius is quite larger while its effective mass is considerably lighter than that estimated within the one-dimensional models. We believe that our findings should be taken into account for the proper understanding of the possible role of large polarons in the charge and energy transfer in quasi-one-dimensional substances.

Skin–core structured fluorinated MWCNTs: a nanofiller towards a broadband dielectric material with a high dielectric constant and low dielectric loss

2018 ◽  
Vol 6 (9) ◽  
pp. 2370-2378 ◽  
Author(s):  
Yang Liu ◽  
Cheng Zhang ◽  
Benyuan Huang ◽  
Xu Wang ◽  
Yulong Li ◽  
...  
Keyword(s):  
Dielectric Constant ◽  
Dielectric Loss ◽  
High Dielectric Constant ◽  
Dielectric Material ◽  
Epoxy Composite ◽  
Low Dielectric ◽  
High Dielectric

A novel skin–core structured fluorinated MWCNT nanofiller was prepared to fabricate epoxy composite with broadband high dielectric constant and low dielectric loss.

Enhanced dielectric properties and thermostability in polyimide composites with core-shell structured polyimide@BaTiO3 nanoparticles

2021 ◽  
pp. 095400832199352
Author(s):  
Wei Deng ◽  
Guanguan Ren ◽  
Wenqi Wang ◽  
Weiwei Cui ◽  
Wenjun Luo
Keyword(s):  
Dielectric Constant ◽  
Dielectric Loss ◽  
Energy Density ◽  
Breakdown Strength ◽  
In Situ Polymerization ◽  
Dielectric Materials ◽  
High Energy ◽  
Amic Acid ◽  
High Energy Density ◽  
Core Shell

Polymer composites with high dielectric constant and thermal stability have shown great potential applications in the fields relating to the energy storage. Herein, core-shell structured polyimide@BaTiO3 (PI@BT) nanoparticles were fabricated via in-situ polymerization of poly(amic acid) (PAA) and the following thermal imidization, then utilized as fillers to prepare PI composites. Increased dielectric constant with suppressed dielectric loss, and enhanced energy density as well as heat resistance were simultaneously realized due to the presence of PI shell between BT nanoparticles and PI matrix. The dielectric constant of PI@BT/PI composites with 55 wt% fillers increased to 15.0 at 100 Hz, while the dielectric loss kept at low value of 0.0034, companied by a high energy density of 1.32 J·cm−3, which was 2.09 times higher than the pristine PI. Moreover, the temperature at 10 wt% weight loss reached 619°C, demonstrating the excellent thermostability of PI@BT/PI composites. In addition, PI@BT/PI composites exhibited improved breakdown strength and toughness as compared with the BT/PI composites due to the well dispersion of PI@BT nanofillers and the improved interfacial interactions between nanofillers and polymer matrix. These results provide useful information for the structural design of high-temperature dielectric materials.

High Frequency Dielectric Response of the Ionic Liquid N-Methyl-N-ethylpyrrolidinium Dicyanamide

2007 ◽  
Vol 60 (1) ◽  
pp. 6 ◽  
Author(s):  
Simon Schrödle ◽  
Gary Annat ◽  
Douglas R. MacFarlane ◽  
Maria Forsyth ◽  
Richard Buchner ◽  
...  
Keyword(s):  
Ionic Liquid ◽  
Dielectric Loss ◽  
Dielectric Relaxation ◽  
High Frequency ◽  
Dielectric Response ◽  
Room Temperature ◽  
Room Temperature Ionic Liquid ◽  
Dielectric Relaxation Spectroscopy ◽  
Frequency Range ◽  
Fast Rotation

A study of the room-temperature ionic liquid N-methyl-N-ethylpyrrolidinium dicyanamide by dielectric relaxation spectroscopy over the frequency range 0.2 GHz ≤ ν ≤ 89 GHz has revealed that, in addition to the already known lower frequency processes, there is a broad featureless dielectric loss at higher frequencies. The latter is probably due to the translational (oscillatory) motions of the dipolar ions of the IL relative to each other, with additional contributions from their fast rotation.

Microstructure and Microwave Dielectric Properties of BaTi4O9 Ceramics Derived from a Sol-Gel Precursor

2011 ◽  
Vol 326 ◽  
pp. 127-130
Author(s):  
Xian Li Huang ◽  
Fu Ping Wang ◽  
Ying Song
Keyword(s):  
Dielectric Constant ◽  
Dielectric Properties ◽  
Dielectric Loss ◽  
Sol Gel ◽  
Microwave Dielectric Properties ◽  
Sintering Process ◽  
Temperature Coefficients ◽  
Microwave Dielectric ◽  
Ceramic Samples ◽  
Quality Factor Q

In the present work, the microstructure and microwave dielectric properties of BaTi4O9 ceramics derived from a sol-gel precursor were presented. Density measuring results demonstrated that the largest densities of ceramic sample about 96.7% could be reached by virtue of a cool iso-static press and a sintering process at at 1300 °C for 6 hours. The dielectric constant (εr), quality factor (Q×f) and the temperature coefficients (τf) of the BaTi4O9 ceramic samples were 36.65, 28000 GHz, +20.2 ppm/°C, respectively. XRD, SEM and XPS were used to characterize the microstructure of the ceramics samples. Substantial Ti3+ was proposed to be the cause of dielectric loss.

Effect of Treatment Process on the Structure and Properties of Sr0.48Ba0.24Ca0.28TiO3-Based Varistor Ceramics

2007 ◽  
Vol 336-338 ◽  
pp. 775-778
Author(s):  
Yu Xing Xu ◽  
Zi Long Tang ◽  
Zhong Tai Zhang ◽  
Li Hai Xu
Keyword(s):  
Dielectric Constant ◽  
Electrical Properties ◽  
Dielectric Loss ◽  
Treatment Process ◽  
Oxidation Temperature ◽  
Structure And Properties ◽  
Defect Reactions ◽  
Effect Of Treatment

Sr0.48Ba0.24Ca0.28TiO3-based varistor ceramics with an excellent capacitor-varistor multifunctional characteristics (V1mA = 11 ~ 49 ν.mm-1, α = 6.1 ~ 11.3, ε r max=3.5×105, tanδmin = 5%) were prepared using conventional solid method. The effect of oxidation temperature and time on structure and electrical properties were investigated. The results show that with increasing the oxidation temperature from 800°C to 900°C, the varistor voltage V1mA and non-linearity coefficient α defining varistor characteristics increase linearly, while the dielectric constant ε r and dielectric loss tanδ decrease linearly. There exists an optimum α value when the specimens were oxidized at 850°C for 3h. This behavior was explained through various defect reactions of dopants.

Preparation and Dielectric Properties of 1-3 La Modified PZT/IPN Piezoelectric Composites

2010 ◽  
Vol 105-106 ◽  
pp. 355-358 ◽  
Author(s):  
Z.L. Zhu ◽  
Dong Yan Tang ◽  
X.H. Zhang ◽  
Y.J. Qiao
Keyword(s):  
Heat Treatment ◽  
Dielectric Constant ◽  
Dielectric Properties ◽  
Dielectric Loss ◽  
Lead Zirconate Titanate ◽  
Polymer Network ◽  
Lead Zirconate ◽  
Interpenetrating Polymer Network ◽  
Ceramic Fibers ◽  
Piezoelectric Composites

To prevent the potential cracking of gel fibers, La modified lead zirconate titanate (PLZT) ceramic fibers with diameter within 50µm were achieved by embedding into PLZT powders during the heat treatment. Then the 1-3 PLZT fiber/interpenetrating polymer network (IPN) piezoelectric composites were prepared by casting the IPN precursors onto the well aligned ceramic fibers. The influences of the heating temperatures and La amounts on the dielectric constant, dielectric loss with frequencies and piezoelectric constant of PLZT were investigated in detail. The morphologies of fibers and composites were observed by biological microscope. And also, the dielectric constant of PLZT fibers and PLZT fiber/IPN piezoelectric composites were detected.

scholarly journals Crown ether-containing polyimides with high dielectric constant

RSC Advances ◽  
2017 ◽  
Vol 7 (38) ◽  
pp. 23309-23312 ◽  
Author(s):  
Ting Yang ◽  
Wenhui Xu ◽  
Xinwen Peng ◽  
Haoqing Hou
Keyword(s):  
Dielectric Constant ◽  
Dielectric Loss ◽  
Crown Ether ◽  
High Dielectric Constant ◽  
Low Dielectric ◽  
High Dielectric

Crown ether-containing polyimides possess high dielectric constant and low dielectric loss, without sacrificing other properties.

Sign in / Sign up

Export Citation Format

Share Document