scholarly journals Full-Colour Solvatochromic Fluorescence Emitted from a Semi-Aromatic Imide Compound Based on ESIPT and Anion Formation

2021 ◽  
Author(s):  
Tabuchi Atsuko ◽  
Teruaki Hayakawa ◽  
Shigeki Kuwata ◽  
Ryohei Ishige ◽  
Shinji Ando
Keyword(s):  
Visible Region ◽  
Anion Formation ◽  
Tosyl Group

A multi-colour solvatochromic fluorophore was developed by substituting a fully organic 3-amino-N-cyclohexyl phthalimide group with a p-toluenesulfonyl (tosyl) group. This compound is essentially colourless in the visible region and exhibits...

Enhanced Electroluminescence of Urethane Containing Processable Polythiophene Derivative by Addition of Dye Molecules

2000 ◽  
Vol 660 ◽  
Author(s):  
Amarjeet Kaur ◽  
Mario J. Cazeca ◽  
Kethinni G. Chittibabu ◽  
Jayant Kumar ◽  
Sukant K. Tripathy
Keyword(s):  
Fluorescent Dyes ◽  
Visible Region ◽  
Dye Molecules ◽  
Flat Panel Display ◽  
Large Area ◽  
Good Efficiency ◽  
Display Devices ◽  
Yellow Color ◽  
Organic Electroluminescent ◽  
Important Approach

ABSTRACTOrganic electroluminescent (EL) diodes based on fluorescent dyes and conducting polymers have attracted the interest of researchers, mainly because of their emission in the visible region and for application to large area portable flat panel display devices, driven at low voltages. Therefore, for the development of higher efficiency polymer EL diodes, the optimal combination of the merits of organic fluorescent dye molecules with that of conjugated polymer is an important approach. We report electroluminescence studies of polymer light emitting diodes (p-LEDs) fabricated with poly[2-(3-thienyl)ethanol n-butoxy carbonylmethyl urethane] (PURET) and its composite with 4-dicyanomethylene-2-methyl-6-(p-dimethylaminostyryl)-4H pyran (DCM) dye. These materials have been chosen in view of the fact that PURET exhibits a small overlap between emission and absorption spectra whereas DCM has a good efficiency of trapping both electrons as well as holes. Polyaniline has been utilized as hole injecting layer whereas tris-8-hydroxyquinoline-aluminum as electron injecting layer. Enhanced electroluminescence with bright yellow color has been observed in p-LEDs by the addition of dye.

Effect of trytophan as dopant on potassium acid phthalate single crystals

2019 ◽  
Author(s):  
Chem Int
Keyword(s):  
Single Crystals ◽  
Room Temperature ◽  
Visible Region ◽  
X Ray Diffraction ◽  
X Ray ◽  
Slow Evaporation Technique ◽  
Absorption Studies ◽  
Evaporation Technique ◽  
Potassium Acid Phthalate ◽  
Acid Phthalate

Optically transparent single crystals of potassium acid phthalate (KAP, 0.5 g) 0.05 g and 0.1 g (1 and 2 mol %) trytophan were grown in aqueous solution by slow evaporation technique at room temperature. Single crystal X- ray diffraction analysis confirmed the changes in the lattice parameters of the doped crystals. The presence of functional groups in the crystal lattice has been determined qualitatively by FTIR analysis. Optical absorption studies revealed that the doped crystals possess very low absorption in the entire visible region. The dielectric constant has been studied as a function of frequency for the doped crystals. The thermal stability was evaluated by TG-DSC analysis.

Tuning the Localized Surface Plasmon Resonance of Al-Al2O3 Nanosphere Towards NIR Region by Gold Coating

2020 ◽  
Vol 12 ◽  
Author(s):  
Jyoti Katyal ◽  
Shivani Gautam
Keyword(s):  
Electric Field ◽  
Field Distribution ◽  
Dielectric Layer ◽  
Electric Field Distribution ◽  
Active Material ◽  
Visible Region ◽  
Field Enhancement ◽  
Localized Surface Plasmon ◽  
Sers Substrate ◽  
Al Nanoparticles

Background: A relatively narrow LSPR peak and a strong inter band transition ranging around 800 nm makes Al strongly plasmonic active material. Usually, Al nanoparticles are preferred for UV-plasmonic as the SPR of small size Al nanoparticles locates in deep UV-UV region of the optical spectrum. This paper focused on tuning the LSPR of Al nanostructure towards infrared region by coating Au layer. The proposed structure has Au as outer layer which prevent the further oxidation of Al nanostructure. Methods: The Finite Difference Time Domain (FDTD) and Plasmon Hybridization Theory has been used to evaluated the LSPR and field enhancement of single and dimer Al-Al2O3-Au MDM nanostructure. Results: It is observed that the resonance mode show dependence on the thickness of Al2O3 layer and also on the composition of nanostructure. The Au layered MDM nanostructure shows two peak of equal intensities simultaneously in UV and visible region tuned to NIR region. The extinction spectra and electric field distribution profiles of dimer nanoparticles are compared with monomer to reveal the extent of coupling. The dimer configuration shows higher field enhancement ~107 at 1049 nm. By optimizing the thickness of dielectric layer the MDM nanostructure can be used over UV-visible-NIR region. Conclusion: The LSPR peak shows dependence on the thickness of dielectric layer and also on the composition of nanostructure. It has been observed that optimization of size and thickness of dielectric layer can provide two peaks of equal intensities in UV and Visible region which is advantageous for many applications. The electric field distribution profiles of dimer MDM nanostructure enhanced the field by ~107 in visible and NIR region shows its potential towards SERS substrate. The results of this study will provide valuable information for the optimization of LSPR of Al-Al2O3-Au MDM nanostructure to have high field enhancement.

KCs Molecular Bands in the Visible Region

2020 ◽  
Vol 128 (11) ◽  
pp. 1738-1743
Author(s):  
Robert Beuc ◽  
Goran Pichler ◽  
David Sarkisyan
Keyword(s):  
Visible Region

Photoelectromotive Force (PEMF) Studies of [Fe(CN)5SCN]3- Complex Ions Adsorbed on Pb(SCN)2 Semiconductor Surfaces

2001 ◽  
Vol 66 (1) ◽  
pp. 81-88 ◽  
Author(s):  
Horst Hennig ◽  
Athanasios Kokorakis ◽  
Stefan Fränzle ◽  
Cornelia Damm ◽  
Franz W. Müller ◽  
...  
Keyword(s):  
Redox Reactions ◽  
Visible Region ◽  
Laser Flash ◽  
Semiconductor Surfaces ◽  
Spectral Sensitization ◽  
Complex Ions ◽  
Hole Trapping ◽  
Photoelectromotive Force

Adsorbates of [Fe(CN)5SCN]3- complex ions on semiconducting Pb(SCN)2 surfaces were subject to photoelectromotive force (PEMF) investigations. Laser flash excitation of the adsorbates at 560 nm yields a weak PEMF signal due to spectral sensitization of the semiconductor Pb(SCN)2, not absorbing in the visible region. PEMF signals observed with laser flash excitation at 337 nm are explained by hole trapping accompanied with photoinduced redox reactions of the complex, when the number of flashes is increased.

scholarly journals Preparation and Photocatalytic Performance for Degradation of Rhodamine B of AgPt/Bi4Ti3O12 Composites

Nanomaterials ◽  
2020 ◽  
Vol 10 (11) ◽  
pp. 2206
Author(s):  
Gaoqian Yuan ◽  
Gen Zhang ◽  
Kezhuo Li ◽  
Faliang Li ◽  
Yunbo Cao ◽  
...  
Keyword(s):  
Visible Light ◽  
Noble Metal ◽  
Rhodamine B ◽  
Photocatalytic Performance ◽  
Bimetallic Nanoparticles ◽  
Resonance Effect ◽  
Visible Region ◽  
Photogenerated Electron ◽  
Pt Nanoparticles ◽  
Electron Hole

Loading a noble metal on Bi4Ti3O12 could enable the formation of the Schottky barrier at the interface between the former and the latter, which causes electrons to be trapped and inhibits the recombination of photoelectrons and photoholes. In this paper, AgPt/Bi4Ti3O12 composite photocatalysts were prepared using the photoreduction method, and the effects of the type and content of noble metal on the photocatalytic performance of the catalysts were investigated. The photocatalytic degradation of rhodamine B (RhB) showed that the loading of AgPt bimetallic nanoparticles significantly improved the catalytic performance of Bi4Ti3O12. When 0.10 wt% noble metal was loaded, the degradation rate for RhB of Ag0.7Pt0.3/Bi4Ti3O12 was 0.027 min−1, which was respectively about 2, 1.7 and 3.7 times as that of Ag/Bi4Ti3O12, Pt/Bi3Ti4O12 and Bi4Ti3O12. The reasons may be attributed as follows: (i) the utilization of visible light was enhanced due to the surface plasmon resonance effect of Ag and Pt in the visible region; (ii) Ag nanoparticles mainly acted as electron acceptors to restrain the recombination of photogenerated electron-hole pairs under visible light irradiation; and (iii) Pt nanoparticles acted as electron cocatalysts to further suppress the recombination of photogenerated electron-hole pairs. The photocatalytic performance of Ag0.7Pt0.3/Bi4Ti3O12 was superior to that of Ag/Bi4Ti3O12 and Pt/Bi3Ti4O12 owing to the synergistic effect between Ag and Pt nanoparticles.

Influence of Etching Regimes on the Reflectance of Black Silicon Films Formed by Ni-Assisted Chemical Etching

2019 ◽  
Vol 806 ◽  
pp. 24-29 ◽  
Author(s):  
Olga V. Volovlikova ◽  
S.A. Gavrilov ◽  
P.I. Lazarenko ◽  
A.V. Kukin ◽  
A.A. Dudin ◽  
...  
Keyword(s):  
Refractive Index ◽  
Treatment Duration ◽  
Chemical Etching ◽  
Visible Region ◽  
High Light ◽  
Silicon Films ◽  
Black Silicon ◽  
Metal Assisted Chemical Etching ◽  
Light Absorptance

This paper examines the influence of etching regimes on the reflectance of black silicon formed by Ni-assisted chemical etching. Black silicon exhibits properties of high light absorptance. The measured minimum values of the reflectance (R-min) of black silicon with thickness of 580 nm formed by metal-assisted chemical etching (MACE) for 60 minutes at 460 lx illumination were 2,3% in the UV region (200–400 nm), 0,5% in the visible region (400–750 nm) and 0,3% in the IR region (750–1300 nm). The findings showed that the reflectance of black silicon depends on its thickness, illumination and treatment duration. In addition, the porosity and refractive index were calculated.

Sign in / Sign up

Export Citation Format

Share Document