scholarly journals Nanoscale interfacial engineering enables highly stable and efficient perovskite photovoltaics

2021 ◽  
Author(s):  
Anurag Krishna ◽  
Hong Zhang ◽  
Zhiwen Zhou ◽  
Thibaut Gallet ◽  
Mathias Dankl ◽  
...  
Keyword(s):  
Molecular Level ◽  
Operational Stability ◽  
Interface Engineering ◽  
Ion Diffusion ◽  
Interfacial Engineering ◽  
Multifunctional Ligand

The molecular level interface engineering with a multifunctional ligand 2,5-thiophenedicarboxylic acid suppresses interfacial ion diffusion and inhibits I2 formation, which leads to high operational stability with T80 of 3570 h along with PCE of 23.4%.

Interfacial engineering enables high efficiency with a high open-circuit voltage above 1.23 V in 2D perovskite solar cells

2018 ◽  
Vol 6 (37) ◽  
pp. 18010-18017 ◽  
Author(s):  
Jiehuan Chen ◽  
Xiaomei Lian ◽  
Yingzhu Zhang ◽  
Weitao Yang ◽  
Jun Li ◽  
...  
Keyword(s):  
Solar Cells ◽  
High Efficiency ◽  
Open Circuit Voltage ◽  
Perovskite Solar Cells ◽  
Open Circuit ◽  
Interface Engineering ◽  
Interfacial Engineering

High efficiency (12.07%) 2D perovskite solar cells with a high open-circuit voltage above 1.23 V are realized via interface engineering.

21.7% efficiency achieved in planar n–i–p perovskite solar cells via interface engineering with water-soluble 2D TiS2

2019 ◽  
Vol 7 (11) ◽  
pp. 6213-6219 ◽  
Author(s):  
Peng Huang ◽  
Qiaoyun Chen ◽  
Kaicheng Zhang ◽  
Ligang Yuan ◽  
Yi Zhou ◽  
...  
Keyword(s):  
Solar Cells ◽  
Perovskite Solar Cells ◽  
Water Soluble ◽  
Interface Engineering ◽  
Interfacial Engineering ◽  
Charge Extraction

In planar n–i–p perovskite solar cells (Pero-SCs), interfacial engineering plays a critically important role in charge extraction and transportation, and hence influences the photovoltaic performances.

scholarly journals Optimizing Performance and Operational Stability of CsPbI3 Quantum-Dot-Based Light-Emitting Diodes by Interface Engineering

2020 ◽  
Vol 2 (8) ◽  
pp. 2525-2534
Author(s):  
K. M. Muhammed Salim ◽  
Ehsan Hassanabadi ◽  
Sofia Masi ◽  
Andrés. F. Gualdrón-Reyes ◽  
Marius Franckevicius ◽  
...  
Keyword(s):  
Quantum Dot ◽  
Light Emitting Diodes ◽  
Operational Stability ◽  
Interface Engineering ◽  
Light Emitting

Preparatory Procedures for Electron Microscopic Analysis at the Molecular Level of Resolution

1978 ◽  
Vol 36 (3) ◽  
pp. 516-520
Author(s):  
F.J. Sjostrand
Keyword(s):  
Electron Microscope ◽  
Molecular Level ◽  
Microscopic Analysis ◽  
Resolving Power ◽  
Cellular Structures ◽  
Electron Microscopic ◽  
Systematic Analysis ◽  
Technical Developments ◽  
Thin Sectioning ◽  
Obvious Reason

In the 1940's and 1950's electron microscopy conferences were attended with everybody interested in learning about the latest technical developments for one very obvious reason. There was the electron microscope with its outstanding performance but nobody could make very much use of it because we were lacking proper techniques to prepare biological specimens. The development of the thin sectioning technique with its perfectioning in 1952 changed the situation and systematic analysis of the structure of cells could now be pursued. Since then electron microscopists have in general become satisfied with the level of resolution at which cellular structures can be analyzed when applying this technique. There has been little interest in trying to push the limit of resolution closer to that determined by the resolving power of the electron microscope.

RNA polymerase: Preparation and structural analysis of helical polymers

1984 ◽  
Vol 42 ◽  
pp. 152-153
Author(s):  
E. Loren Buhle ◽  
Pamela Rew ◽  
Ueli Aebi
Keyword(s):  
Structural Analysis ◽  
Rna Polymerase ◽  
Molecular Level ◽  
X Ray Diffraction ◽  
Helical Polymers ◽  
X Ray ◽  
E Coli ◽  
The Past ◽  
Ordered Arrays ◽  
Low Ionic Strength

While DNA-dependent RNA polymerase represents one of the key enzymes involved in transcription and ultimately in gene expression in procaryotic and eucaryotic cells, little progress has been made towards elucidation of its 3-D structure at the molecular level over the past few years. This is mainly because to date no 3-D crystals suitable for X-ray diffraction analysis have been obtained with this rather large (MW ~500 kd) multi-subunit (α2ββ'ζ). As an alternative, we have been trying to form ordered arrays of RNA polymerase from E. coli suitable for structural analysis in the electron microscope combined with image processing. Here we report about helical polymers induced from holoenzyme (α2ββ'ζ) at low ionic strength with 5-7 mM MnCl2 (see Fig. 1a). The presence of the ζ-subunit (MW 86 kd) is required to form these polymers, since the core enzyme (α2ββ') does fail to assemble into such structures under these conditions.

The Current Situation in Chemical Stabilization of Biological Materials

1972 ◽  
Vol 30 ◽  
pp. 132-133
Author(s):  
John H. Luft
Keyword(s):  
Electron Microscopy ◽  
Electron Microscope ◽  
Osmium Tetroxide ◽  
Molecular Level ◽  
Cross Linking ◽  
Chemical Stabilization ◽  
Specimen Preparation ◽  
Sufficient Condition ◽  
Radio Telescopes

With information processing devices such as radio telescopes, microscopes or hi-fi systems, the quality of the output often is limited by distortion or noise introduced at the input stage of the device. This analogy can be extended usefully to specimen preparation for the electron microscope; fixation, which initiates the processing sequence, is the single most important step and, unfortunately, is the least well understood. Although there is an abundance of fixation mixtures recommended in the light microscopy literature, osmium tetroxide and glutaraldehyde are favored for electron microscopy. These fixatives react vigorously with proteins at the molecular level. There is clear evidence for the cross-linking of proteins both by osmium tetroxide and glutaraldehyde and cross-linking may be a necessary if not sufficient condition to define fixatives as a class.

Atom-probe analysis of the solid-liquid interface

1995 ◽  
Vol 53 ◽  
pp. 676-677
Author(s):  
J.A. Panitz
Keyword(s):  
Molecular Level ◽  
Selective Adsorption ◽  
Electronic Devices ◽  
Atom Probe ◽  
Chemical Agent ◽  
Hostile Environment ◽  
Solid Interface ◽  
Solid Liquid Interface ◽  
Solid Liquid ◽  
Chemically Selective

The first few atomic layers of a solid can form a barrier between its interior and an often hostile environment. Although adsorption at the vacuum-solid interface has been studied in great detail, little is known about adsorption at the liquid-solid interface. Adsorption at a liquid-solid interface is of intrinsic interest, and is of technological importance because it provides a way to coat a surface with monolayer or multilayer structures. A pinhole free monolayer (with a reasonable dielectric constant) could lead to the development of nanoscale capacitors with unique characteristics and lithographic resists that surpass the resolution of their conventional counterparts. Chemically selective adsorption is of particular interest because it can be used to passivate a surface from external modification or change the wear and the lubrication properties of a surface to reflect new and useful properties. Immunochemical adsorption could be used to fabricate novel molecular electronic devices or to construct small, “smart”, unobtrusive sensors with the potential to detect a wide variety of preselected species at the molecular level. These might include a particular carcinogen in the environment, a specific type of explosive, a chemical agent, a virus, or even a tumor in the human body.

Shot-noise simulations of HREM images of polymer crystals

1989 ◽  
Vol 47 ◽  
pp. 342-343
Author(s):  
Philippe Pradère ◽  
Edwin L. Thomas
Keyword(s):  
Low Dose ◽  
Molecular Level ◽  
High Resolution Electron Microscopy ◽  
Crystal Defects ◽  
Inorganic Materials ◽  
Photographic Emulsion ◽  
Polymer Crystals ◽  
Resolution Electron ◽  
Recent Developments ◽  
Lattice Images

High Resolution Electron Microscopy (HREM) is a very powerful technique for the study of crystal defects at the molecular level. Unfortunately polymer crystals are beam sensitive and are destroyed almost instantly under the typical HREM imaging conditions used for inorganic materials. Recent developments of low dose imaging at low magnification have nevertheless permitted the attainment of lattice images of very radiation sensitive polymers such as poly-4-methylpentene-1 and enabled molecular level studies of crystal defects in somewhat more resistant ones such as polyparaxylylene (PPX) [2].With low dose conditions the images obtained are very noisy. Noise arises from the support film, photographic emulsion granularity and in particular, the statistical distribution of electrons at the typical doses of only few electrons per unit resolution area. Figure 1 shows the shapes of electron distribution, according to the Poisson formula :

Morphology of High-Performance Rigid-Rod Polymer Fibers and Molecular Composites

1989 ◽  
Vol 47 ◽  
pp. 338-339
Author(s):  
W.W. Adams ◽  
S. J. Krause
Keyword(s):  
Tensile Strength ◽  
High Performance ◽  
Liquid Crystalline ◽  
Molecular Level ◽  
Synergistic Effects ◽  
Tensile Modulus ◽  
Commercial Development ◽  
The Matrix ◽  
Molecular Composites ◽  
Rigid Rod

Rigid-rod polymers such as PBO, poly(paraphenylene benzobisoxazole), Figure 1a, are now in commercial development for use as high-performance fibers and for reinforcement at the molecular level in molecular composites. Spinning of liquid crystalline polyphosphoric acid solutions of PBO, followed by washing, drying, and tension heat treatment produces fibers which have the following properties: density of 1.59 g/cm3; tensile strength of 820 kpsi; tensile modulus of 52 Mpsi; compressive strength of 50 kpsi; they are electrically insulating; they do not absorb moisture; and they are insensitive to radiation, including ultraviolet. Since the chain modulus of PBO is estimated to be 730 GPa, the high stiffness also affords the opportunity to reinforce a flexible coil polymer at the molecular level, in analogy to a chopped fiber reinforced composite. The objectives of the molecular composite concept are to eliminate the thermal expansion coefficient mismatch between the fiber and the matrix, as occurs in conventional composites, to eliminate the interface between the fiber and the matrix, and, hopefully, to obtain synergistic effects from the exceptional stiffness of the rigid-rod molecule. These expectations have been confirmed in the case of blending rigid-rod PBZT, poly(paraphenylene benzobisthiazole), Figure 1b, with stiff-chain ABPBI, poly 2,5(6) benzimidazole, Fig. 1c A film with 30% PBZT/70% ABPBI had tensile strength 190 kpsi and tensile modulus of 13 Mpsi when solution spun from a 3% methane sulfonic acid solution into a film. The modulus, as predicted by rule of mixtures, for a film with this composition and with planar isotropic orientation, should be 16 Mpsi. The experimental value is 80% of the theoretical value indicating that the concept of a molecular composite is valid.

Sign in / Sign up

Export Citation Format

Share Document