Pushing Commercialization of Perovskite Solar Cells by Improving Their Intrinsic Stability

2021 ◽  
Author(s):  
Yuanhang Cheng ◽  
Liming Ding
Keyword(s):  
Solar Cells ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
Power Conversion ◽  
Perovskite Solar Cells ◽  
Rapid Progress ◽  
The Real ◽  
Intrinsic Stability

Despite the rapid progress in power conversion efficiency (PCE) from 3.8% to 25.5% with ten years of effort, the real outdoor applications of perovskite solar cells (PSCs) are still significantly...

A thiourea additive-based quadruple cation lead halide perovskite with an ultra-large grain size for efficient perovskite solar cells

Nanoscale ◽  
2019 ◽  
Vol 11 (45) ◽  
pp. 21824-21833 ◽  
Author(s):  
Jyoti V. Patil ◽  
Sawanta S. Mali ◽  
Chang Kook Hong
Keyword(s):  
Thin Films ◽  
Grain Size ◽  
Solar Cells ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
Power Conversion ◽  
Perovskite Solar Cells ◽  
Inorganic Perovskite ◽  
Halide Perovskite ◽  
Lead Halide

Controlling the grain size of the organic–inorganic perovskite thin films using thiourea additives now crossing 2 μm size with >20% power conversion efficiency.

scholarly journals Two-dimensional or passivation treatment: the effect of Hexylammonium post deposition treatment on 3D halide perovskite-based solar cells

2021 ◽  
Author(s):  
Stav Rahmany ◽  
Lioz Etgar
Keyword(s):  
Solar Cells ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
Power Conversion ◽  
Perovskite Solar Cells ◽  
Two Dimensional ◽  
Theoretical Limit ◽  
Halide Perovskite ◽  
Passivation Treatment ◽  
Post Deposition

Much effort has been made to push the power conversion efficiency of perovskite solar cells (PSCs) towards the theoretical limit. Recent studies have shown that post deposition treatment of barrier...

scholarly journals SnO2–Ti3C2 MXene electron transport layers for perovskite solar cells

2019 ◽  
Vol 7 (10) ◽  
pp. 5635-5642 ◽  
Author(s):  
Lin Yang ◽  
Yohan Dall'Agnese ◽  
Kanit Hantanasirisakul ◽  
Christopher E. Shuck ◽  
Kathleen Maleski ◽  
...  
Keyword(s):  
Solar Cells ◽  
Electron Transport ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
Power Conversion ◽  
Perovskite Solar Cells ◽  
P Addition

Addition of the Ti3C2 into SnO2 enhanced the power conversion efficiency due to the good conductivity of Ti3C2 nanosheets.

Strategies of modifying spiro-OMeTAD materials for perovskite solar cells: A review

2021 ◽  
Author(s):  
Wenbin Guo ◽  
Guanhua Ren ◽  
Wenbin Han ◽  
Yanyu Deng ◽  
Wei Wu ◽  
...  
Keyword(s):  
Solar Cells ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
Power Conversion ◽  
Perovskite Solar Cells ◽  
Inorganic Hybrid ◽  
The Past ◽  
Hybrid Perovskite

Organic-inorganic hybrid perovskite solar cells (PSCs) have made unprecedented progress in the past ten years, the power conversion efficiency of which increased from 3.8% in 2009 to 25.5% in 2019....

scholarly journals Room Temperature Processed Double Electron Transport Layers for Efficient Perovskite Solar Cells

Nanomaterials ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 329
Author(s):  
Wen Huang ◽  
Rui Zhang ◽  
Xuwen Xia ◽  
Parker Steichen ◽  
Nanjing Liu ◽  
...  
Keyword(s):  
Solar Cells ◽  
Electron Transport ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
Room Temperature ◽  
Deposition Time ◽  
Power Conversion ◽  
Perovskite Solar Cells ◽  
Electron Transport Layer ◽  
Double Electron

Zinc Oxide (ZnO) has been regarded as a promising electron transport layer (ETL) in perovskite solar cells (PSCs) owing to its high electron mobility. However, the acid-nonresistance of ZnO could destroy organic-inorganic hybrid halide perovskite such as methylammonium lead triiodide (MAPbI3) in PSCs, resulting in poor power conversion efficiency (PCE). It is demonstrated in this work that Nb2O5/ZnO films were deposited at room temperature with RF magnetron sputtering and were successfully used as double electron transport layers (DETL) in PSCs due to the energy band matching between Nb2O5 and MAPbI3 as well as ZnO. In addition, the insertion of Nb2O5 between ZnO and MAPbI3 facilitated the stability of the perovskite film. A systematic investigation of the ZnO deposition time on the PCE has been carried out. A deposition time of five minutes achieved a ZnO layer in the PSCs with the highest power conversion efficiency of up to 13.8%. This excellent photovoltaic property was caused by the excellent light absorption property of the high-quality perovskite film and a fast electron extraction at the perovskite/DETL interface.

Amidation Induced Self-Reduction of p-GO with Lewis-Base Termination for All-Inorganic CsPbIBr2 Perovskite Solar Cells

2021 ◽  
Author(s):  
Jian Du ◽  
Jialong Duan ◽  
Qiyao Guo ◽  
Yanyan Duan ◽  
Xiya Yang ◽  
...  
Keyword(s):  
Solar Cells ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
Power Conversion ◽  
Perovskite Solar Cells ◽  
Lewis Base ◽  
Interfacial Energetics

Simultaneously tailoring the interfacial energetics and healing the defective nanostructure of perovskite film is of great important to promote the power conversion efficiency of perovskite solar cells (PSCs). Herein, a...

Incident-angle-controlled semitransparent colored perovskite solar cells with improved efficiency exploiting a multilayer dielectric mirror

Nanoscale ◽  
2017 ◽  
Vol 9 (37) ◽  
pp. 13983-13989 ◽  
Author(s):  
Kyu-Tae Lee ◽  
Ji-Yun Jang ◽  
Sang Jin Park ◽  
Song Ah Ok ◽  
Hui Joon Park
Keyword(s):  
Solar Cells ◽  
Visible Light ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
Incident Angle ◽  
Power Conversion ◽  
Perovskite Solar Cells ◽  
Dielectric Mirror ◽  
Wide Range ◽  
Multilayer Dielectric

See-through colored perovskite solar cells that exploit a dielectric mirror are demonstrated. The dielectric mirror strongly reflects a wide range of visible light back to a photoactive layer for efficient light-harvesting, yielding 10.12% power conversion efficiency, with iridescent semitransparent colors.

High-performance flexible and air-stable perovskite solar cells with a large active area based on poly(3-hexylthiophene) nanofibrils

2016 ◽  
Vol 4 (29) ◽  
pp. 11307-11316 ◽  
Author(s):  
Minwoo Park ◽  
Joon-Suh Park ◽  
Il Ki Han ◽  
Jin Young Oh
Keyword(s):  
Solar Cells ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
High Performance ◽  
Power Conversion ◽  
Perovskite Solar Cells ◽  
Active Area ◽  
Hole Transporting ◽  
Large Active Area

By incorporating long P3HT nanofibrils as a hole transporting layer, high-performance, air-stable and flexible perovskite solar cells with a large active area (1 cm2) have been realized with an excellent power conversion efficiency of 13.12%.

Slow surface passivation and crystal relaxation with additives to improve device performance and durability for tin-based perovskite solar cells

2018 ◽  
Vol 11 (9) ◽  
pp. 2353-2362 ◽  
Author(s):  
Efat Jokar ◽  
Cheng-Hsun Chien ◽  
Amir Fathi ◽  
Mohammad Rameez ◽  
Yu-Hao Chang ◽  
...  
Keyword(s):  
Solar Cells ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
Surface Passivation ◽  
Power Conversion ◽  
Perovskite Solar Cells ◽  
Device Performance ◽  
Slow Surface ◽  
Effective Additive ◽  
Improve Device

Ethylenediammonium diiodide (EDAI2) served as an effective additive for tin-based perovskite solar cells to attain a power conversion efficiency approaching 9%.

Sign in / Sign up

Export Citation Format

Share Document