Nb doped TiO2 nanoparticles derived from titanate with improved lithium storage performance

2022 ◽  
Author(s):  
Yubin Liu ◽  
Xiaoyang Pan ◽  
Wen-Jie Chen ◽  
Xiaojing Zhao
Keyword(s):  
Tio2 Nanoparticles ◽  
Synthetic Method ◽  
X Ray Diffraction ◽  
Lithium Storage ◽  
Doped Tio2 ◽  
X Ray ◽  
Storage Performance

In the present work, a facile synthetic method has been used to prepared Nb doped TiO2 nanoparticles with titanate as precursor. The synthesized electrodes materials were characterized by X-ray diffraction,...

One-step fabricating nitrogen-doped TiO2 nanoparticles coated with carbon to achieve excellent high-rate lithium storage performance

2016 ◽  
Vol 187 ◽  
pp. 389-396 ◽  
Author(s):  
Xue Bai ◽  
Tao Li ◽  
Yong-Xin Qi ◽  
Yan-Xiang Wang ◽  
Long-Wei Yin ◽  
...  
Keyword(s):  
Tio2 Nanoparticles ◽  
High Rate ◽  
Lithium Storage ◽  
Doped Tio2 ◽  
Nitrogen Doped ◽  
Storage Performance ◽  
One Step

scholarly journals A study on preparation and characterization of carbon doped TiO2 nanotubes

2014 ◽  
Vol 6 (1) ◽  
Author(s):  
Srimala Sreekantan ◽  
Roshasnorlyza Hazan ◽  
Zainovia Lockman ◽  
Ishak Mat
Keyword(s):  
Methyl Orange ◽  
Tio2 Nanotubes ◽  
Pure Tio2 ◽  
Ex Situ ◽  
X Ray Diffraction ◽  
Methyl Orange Degradation ◽  
Doped Tio2 ◽  
X Ray ◽  
Carbon Doped

The present study is directed to clarify the influence of carbon doping on the degradation of methyl orange. TiO2 nanotubes were prepared by anodizing titanium foils in a two electrode configuration bath with titanium foil as the anode and platinum as the counter electrode. The electrochemical bathconsists of 1 M Na2SO4 with 0.7 g ammonium fluoride, NH4F. The nanotubes obtained were further doped with carbon via in-situ and ex-situ method. Incorporation of carbon on TiO2 via in-situ method is accomplished during the anodization process by introducing oxalic acid into electrolyte while theex-situ doping involves carbon incorporation into pre-fabricated TiO2 nanotube via flame annealing using carbon blackN330. Characterization such as Scanning Electron Microscope (SEM), Energy Dispersive X-ray Analysis (EDX), and X-Ray Diffraction (XRD) are used to determine the surfacemorphology, composition of dopants, and phases exists. Well ordered nanotube with good adherence and smooth surface was obtained for both methods. When the oxide was annealed, X-ray diffraction analysis revealed the presence of anatase and rutile phase. The photocatalytic properties of thepure TiO2 and carbon doped TiO2 were tested for methyl orange degradation and the result indicated that the in-situ doped TiO2 has much better degradation than the ex-situ and pure TiO2. The percentage of methyl orange degradation for in-situ was 20% and 41% higher than ex-situ doped TiO2 and pure TiO2, respectively.

scholarly journals Synthesis Photocatalytic and Antibacterial Activities of Nickle Doped Tio2 Nanoparticles

2018 ◽  
Vol 34 (6) ◽  
pp. 3140-3144
Author(s):  
Ritu Vershney ◽  
Komal Chelaramani ◽  
Arpan Bhardwaj ◽  
Nayma Siddiqui ◽  
Suresh Kumar Verma
Keyword(s):  
Photocatalytic Degradation ◽  
Tio2 Nanoparticles ◽  
Sol Gel ◽  
Antibacterial Activities ◽  
X Ray Diffraction ◽  
Zone Of Inhibition ◽  
Time Duration ◽  
X Ray ◽  
Gel Technique ◽  
Doped Titania

The synthesis of Ni doped titania (TiO2) nanoparticles were achieved via simple novel sol gel technique, in which Titanium-n-butoxide and NiCl2 were taken as precursors. Effect of different wt% of dopant in TiO2 was studied on photocatalytic degradation of Aniline blue and Toluidine Blue. The study suggested the increased photocatalytic degradation with increased time duration. The synthesized samples were analyzed by surface electron microscopy (SEM) and X-ray diffraction studies. The antibacterial activity was investigated against Gram-positive Staphylococcus aureus bacteriae. Studies revealed that on increasing the dopant concentration, the diameter of zone of inhibition also increased upto 1.5 wt%.

scholarly journals Grafting Hyperbranched Polymers onto TiO2 Nanoparticles via Thiol-yne Click Chemistry and Its Effect on the Mechanical, Thermal and Surface Properties of Polyurethane Coating

Materials ◽  
2019 ◽  
Vol 12 (17) ◽  
pp. 2817 ◽  
Author(s):  
Feng Zhan ◽  
Lei Xiong ◽  
Fang Liu ◽  
Chenying Li
Keyword(s):  
Click Chemistry ◽  
Tio2 Nanoparticles ◽  
Photoelectron Spectroscopy ◽  
Hyperbranched Polymers ◽  
Nanocomposite Coatings ◽  
Mechanical And Thermal Properties ◽  
Nanoparticle Dispersion ◽  
X Ray Diffraction ◽  
X Ray ◽  
Surface Modified

In this study, we proposed a novel and facile method to modify the surface of TiO2 nanoparticles and investigated the influence of the surface-modified TiO2 nanoparticles as an additive in a polyurethane (PU) coating. The hyperbranched polymers (HBP) were grafted on the surface of TiO2 nanoparticles via the thiol-yne click chemistry to reduce the aggregation of nanoparticles and increase the interaction between TiO2 and polymer matrices. The grafting of HBP on the TiO2 nanoparticles surface was investigated by means of X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), Fourier transform infrared (FT-IR), nuclear magnetic resonance (NMR) and thermogravimetry analysis (TGA). The thermal and mechanical properties of nanocomposite coatings containing various amounts of TiO2 nanoparticles were measured by dynamic mechanical thermal (DMTA) and tensile strength measurement. Moreover, the surface structure and properties of the newly prepared nanocomposite coatings were examined. The experimental results demonstrate that the incorporation of the surface-modified TiO2 nanoparticles can improve the mechanical and thermal properties of nanocomposite coatings. The results also reveal that the surface modification of TiO2 with the HBP chains improves the nanoparticle dispersion, and the coating surface shows a lotus leaf-like microstructure. Thus, the functional nanocomposite coatings exhibit superhydrophobic properties, good photocatalytic depollution performance, and high stripping resistance.

Sol–gel preparation of V2O5 sheets and their lithium storage behaviors studied by electrochemical and in-situ X-ray diffraction techniques

2014 ◽  
Vol 40 (4) ◽  
pp. 6115-6125 ◽  
Author(s):  
Lianyi Shao ◽  
Kaiqiang Wu ◽  
Xiaoting Lin ◽  
Miao Shui ◽  
Rui Ma ◽  
...  
Keyword(s):  
Sol Gel ◽  
X Ray Diffraction ◽  
Lithium Storage ◽  
X Ray ◽  
Gel Preparation

scholarly journals Effect of TiO2-Nanoparticles on Ni Electrodeposition on Copper Wire

Metals ◽  
2020 ◽  
Vol 10 (3) ◽  
pp. 406
Author(s):  
Samiha Saad ◽  
Zakaria Boumerzoug ◽  
Anne Laure Helbert ◽  
François Brisset ◽  
Thierry Baudin
Keyword(s):  
Surface Morphology ◽  
Tio2 Nanoparticles ◽  
Vickers Microhardness ◽  
Electron Backscatter Diffraction ◽  
Copper Wire ◽  
X Ray Diffraction ◽  
X Ray ◽  
Electron Backscatter ◽  
Electrodeposited Nickel ◽  
Backscatter Diffraction

The objective of this work is to study, on a copper wire, the effect of TiO2-nanoparticles on electrodeposited nickel. Both the microstructure and surface morphology (texture) of the coating were investigated. This deposit is obtained from baths of sulfated electroplating Watts. The Ni-TO2 composite coating is deposited at a temperature of 45 °C. The composite deposit is prepared by adding nanoparticles of TiO2 to the electrolyte. The characterization has been carried out by X-ray diffraction, scanning electron microscopy, microhardness measurements, and electron backscatter diffraction (EBSD). Vickers microhardness was used to characterize the mechanical properties of the electrodeposited nickel. The results showed the effects of the TiO2 on the composition, the surface morphology, and the hardness of the deposited layer. However, there was not an effect of TiO2 nanoparticles on texture.

Preparation of N-doped TiO2 by oxidizing TiN and its application on phenol degradation

2013 ◽  
Vol 68 (4) ◽  
pp. 934-939 ◽  
Author(s):  
Ji-Guo Huang ◽  
Xiao-Guang Zhao ◽  
Meng-Yang Zheng ◽  
Sen Li ◽  
Yu Wang ◽  
...  
Keyword(s):  
Photoelectron Spectroscopy ◽  
Diffuse Reflectance ◽  
Phenol Degradation ◽  
Light Sources ◽  
X Ray Diffraction ◽  
Simple Method ◽  
Doped Tio2 ◽  
X Ray ◽  
Nitrogen Doped ◽  
Different Temperatures

Incomplete oxidation of titanium nitride (TiN) to prepare nitrogen-doped TiO2 was verified by calcining TiN at different temperatures in air for 30 min. The as-prepared samples were characterized by X-ray diffraction, UV-Vis diffuse reflectance spectra and X-ray photoelectron spectroscopy. The results confirmed that oxidizing TiN incompletely is an effective and simple method to prepare nitrogen-doped TiO2. Photocatalytic degradation of phenol was conducted to evaluate the photocatalytic activity of as-prepared samples. The results showed that phenol can be degraded efficiently by the as-prepared samples under visible light; low phenol concentration was conducive to degradation; the optimum calcination temperature and photocatalyst dosage are 650 °C and 0.5 g/L, respectively. The effects of different light sources on phenol degradation were compared. The reusability of nitrogen-doped TiO2 was tested and the results indicated a relatively good reusability under laboratory conditions.

A STUDY ON A NEW SYNTHETIC METHOD OF CdS AND CdSe NANOPARTICLES AND THEIR ORGANIC/INORGANIC NANOCOMPOSITE

2002 ◽  
Vol 01 (05n06) ◽  
pp. 501-505 ◽  
Author(s):  
JU YOUNG LEE ◽  
YOUNG SOO KANG ◽  
YONG JOO KIM
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Particle Size ◽  
Cdse Nanoparticles ◽  
Inorganic Nanoparticles ◽  
Synthetic Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Inorganic Films

Materials such as CdS and CdSe inorganic nanoparticles have photoluminescence. Sodium oleate has been used as effective stabilizers for the synthesis of CdS and CdSe nanoparticles in water by autoclave method. Photoluminescence of CdS and CdSe with particle size of 5–14 nm showed λ max at 520 nm and 600 nm, respectively, when were excited at 365 nm. These nanoparticles doped into the PVA resulted in the organic/inorganic films ( PVA/CdS , CdSe ). Photoluminescence, X-ray diffraction and transmission electron microscopy were employed for their characterization.

Synthesis, Characterization and Photocatalytic Activity of Nb-Doped TiO2 Nanoparticles

2012 ◽  
Vol 455-456 ◽  
pp. 110-114 ◽  
Author(s):  
Xuan Dong Li ◽  
Xi Jiang Han ◽  
Wen Ying Wang ◽  
Xiao Hong Liu ◽  
Yan Wang ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Photocatalytic Activity ◽  
Methyl Orange ◽  
Photoelectron Spectroscopy ◽  
Sol Gel ◽  
Molar Ratio ◽  
X Ray Diffraction ◽  
Doped Tio2 ◽  
X Ray ◽  
Vis Spectroscopy

Nb-doped TiO2 powders with different concentrations of Nb have been synthesized by a sol-gel method and characterized by a series of technologies including X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and UV-vis spectroscopy. The photocatalytic activity of Nb-doped TiO2 is evaluated by degradation efficiency of methyl orange in aqueous solution. The results indicate that the photocatalytic activity of Nb-doped TiO2 synthesized with a Nb/Ti molar ratio of 5% is higher than that of TiO2 under the visible light.

Sign in / Sign up

Export Citation Format

Share Document