Hierarchical hollow BiFeO3 microcubes with enhanced acetone gas sensing performance

2021 ◽  
Author(s):  
Qiuci Yu ◽  
Yuchi Zhang ◽  
Yan Xu
Keyword(s):  
Metal Oxide ◽  
Gas Sensors ◽  
Gas Sensing ◽  
Improved Performance ◽  
Sensing Performance

Metal oxide-based gas sensors have drawn tremendous research interests owing to their various compositions and selective and improved performance. However, the development of a targeted metal oxide with controlled microstructures...

scholarly journals Recent Advances in Electrochemical Sensors for Detecting Toxic Gases: NO2, SO2 and H2S

Sensors ◽  
2019 ◽  
Vol 19 (4) ◽  
pp. 905 ◽  
Author(s):  
Md Khan ◽  
Mulpuri Rao ◽  
Qiliang Li
Keyword(s):  
Metal Oxide ◽  
Gas Sensors ◽  
Electrochemical Sensors ◽  
Gas Sensing ◽  
Performance Comparison ◽  
Toxic Gases ◽  
Recent Advances ◽  
Metal Metal ◽  
Sensor Materials ◽  
Sensing Performance

Toxic gases, such as NOx, SOx, H2S and other S-containing gases, cause numerous harmful effects on human health even at very low gas concentrations. Reliable detection of various gases in low concentration is mandatory in the fields such as industrial plants, environmental monitoring, air quality assurance, automotive technologies and so on. In this paper, the recent advances in electrochemical sensors for toxic gas detections were reviewed and summarized with a focus on NO2, SO2 and H2S gas sensors. The recent progress of the detection of each of these toxic gases was categorized by the highly explored sensing materials over the past few decades. The important sensing performance parameters like sensitivity/response, response and recovery times at certain gas concentration and operating temperature for different sensor materials and structures have been summarized and tabulated to provide a thorough performance comparison. A novel metric, sensitivity per ppm/response time ratio has been calculated for each sensor in order to compare the overall sensing performance on the same reference. It is found that hybrid materials-based sensors exhibit the highest average ratio for NO2 gas sensing, whereas GaN and metal-oxide based sensors possess the highest ratio for SO2 and H2S gas sensing, respectively. Recently, significant research efforts have been made exploring new sensor materials, such as graphene and its derivatives, transition metal dichalcogenides (TMDs), GaN, metal-metal oxide nanostructures, solid electrolytes and organic materials to detect the above-mentioned toxic gases. In addition, the contemporary progress in SO2 gas sensors based on zeolite and paper and H2S gas sensors based on colorimetric and metal-organic framework (MOF) structures have also been reviewed. Finally, this work reviewed the recent first principle studies on the interaction between gas molecules and novel promising materials like arsenene, borophene, blue phosphorene, GeSe monolayer and germanene. The goal is to understand the surface interaction mechanism.

scholarly journals Electrically Transduced Gas Sensors Based on Semiconducting Metal Oxide Nanowires

Sensors ◽  
2020 ◽  
Vol 20 (23) ◽  
pp. 6781
Author(s):  
Ying Wang ◽  
Li Duan ◽  
Zhen Deng ◽  
Jianhui Liao
Keyword(s):  
Metal Oxide ◽  
Low Power ◽  
Gas Sensors ◽  
Gas Sensing ◽  
Volume Ratio ◽  
High Sensitivity ◽  
Disease Diagnosis ◽  
Thermal Stabilities ◽  
Semiconducting Metal Oxide ◽  
Sensing Performance

Semiconducting metal oxide-based nanowires (SMO-NWs) for gas sensors have been extensively studied for their extraordinary surface-to-volume ratio, high chemical and thermal stabilities, high sensitivity, and unique electronic, photonic and mechanical properties. In addition to improving the sensor response, vast developments have recently focused on the fundamental sensing mechanism, low power consumption, as well as novel applications. Herein, this review provides a state-of-art overview of electrically transduced gas sensors based on SMO-NWs. We first discuss the advanced synthesis and assembly techniques for high-quality SMO-NWs, the detailed sensor architectures, as well as the important gas-sensing performance. Relationships between the NWs structure and gas sensing performance are established by understanding general sensitization models related to size and shape, crystal defect, doped and loaded additive, and contact parameters. Moreover, major strategies for low-power gas sensors are proposed, including integrating NWs into microhotplates, self-heating operation, and designing room-temperature gas sensors. Emerging application areas of SMO-NWs-based gas sensors in disease diagnosis, environmental engineering, safety and security, flexible and wearable technology have also been studied. In the end, some insights into new challenges and future prospects for commercialization are highlighted.

scholarly journals Graphene-enhanced metal oxide gas sensors at room temperature: a review

2018 ◽  
Vol 9 ◽  
pp. 2832-2844 ◽  
Author(s):  
Dongjin Sun ◽  
Yifan Luo ◽  
Marc Debliquy ◽  
Chao Zhang
Keyword(s):  
Metal Oxide ◽  
Gas Sensors ◽  
Room Temperature ◽  
Gas Sensing ◽  
Metal Oxide Semiconductors ◽  
Oxide Semiconductors ◽  
Sensing Material ◽  
Metal Oxide Gas Sensors ◽  
Low Sensitivity ◽  
Sensing Performance

Owing to the excellent sensitivity to gases, metal-oxide semiconductors (MOS) are widely used as materials for gas sensing. Usually, MOS gas sensors have some common shortages, such as relatively poor selectivity and high operating temperature. Graphene has drawn much attention as a gas sensing material in recent years because it can even work at room temperature, which reduces power consumption. However, the low sensitivity and long recovery time of the graphene-based sensors limit its further development. The combination of metal-oxide semiconductors and graphene may significantly improve the sensing performance, especially the selectivity and response/recovery rate at room temperature. In this review, we have summarized the latest progress of graphene/metal-oxide gas sensors for the detection of NO2, NH3, CO and some volatile organic compounds (VOCs) at room temperature. Meanwhile, the sensing performance and sensing mechanism of the sensors are discussed. The improved experimental schemes are raised and the critical research directions of graphene/metal-oxide sensors in the future are proposed.

Gas Sensing Performance of 2D Nanomaterials/Metal Oxide Nanocomposites: A Review

2021 ◽  
Author(s):  
Vijendra Singh Bhati ◽  
Mahesh Kumar ◽  
Rupak Banerjee
Keyword(s):  
Metal Oxide ◽  
Gas Sensors ◽  
Industrial Production ◽  
Gas Sensing ◽  
Material Selection ◽  
Daily Life ◽  
2D Nanomaterials ◽  
Sensing Performance

In recent years, the utilization of gas sensors has increased tremendously in daily life as well as industrial production. Importantly, appropriate material selection is imperative for gas sensors in order...

Metal-oxide based ammonia gas sensors: A review

2020 ◽  
Vol 10 ◽  
Author(s):  
Priya Gupta ◽  
Savita Maurya ◽  
Narendra Kumar Pandey ◽  
Vernica Verma
Keyword(s):  
Metal Oxide ◽  
Metal Oxides ◽  
Gas Sensor ◽  
Gas Sensors ◽  
Review Paper ◽  
Gas Sensing ◽  
Gas Sensitivity ◽  
Ammonia Gas ◽  
Ammonia Sensing ◽  
Ammonia Gas Sensors

: This review paper encompasses a study of metal-oxide and their composite based gas sensors used for the detection of ammonia (NH3) gas. Metal-oxide has come into view as an encouraging choice in the gas sensor industry. This review paper focuses on the ammonia sensing principle of the metal oxides. It also includes various approaches adopted for increasing the gas sensitivity of metal-oxide sensors. Increasing the sensitivity of the ammonia gas sensor includes size effects and doping by metal or other metal oxides which will change the microstructure and morphology of the metal oxides. Different parameters that affect the performances like sensitivity, stability, and selectivity of gas sensors are discussed in this paper. Performances of the most operated metal oxides with strengths and limitations in ammonia gas sensing application are reviewed. The challenges for the development of high sensitive and selective ammonia gas sensor are also discussed.

scholarly journals Advanced development of metal oxide nanomaterials for H2 gas sensing applications

2021 ◽  
Author(s):  
Yushu Shi ◽  
Huiyan Xu ◽  
Tongyao Liu ◽  
Shah Zeb ◽  
Yong Nie ◽  
...  
Keyword(s):  
Metal Oxide ◽  
Gas Sensors ◽  
Gas Sensing ◽  
The Past ◽  
Sensing Applications ◽  
The Future ◽  
Metal Oxide Nanomaterials ◽  
Nanomaterials Synthesis ◽  
Advanced Development

The scheme of the structure of this review includes an introduction from the metal oxide nanomaterials’ synthesis to application in H2 gas sensors—a vision from the past to the future.

scholarly journals Nanostructured SmFeO3 Gas Sensors: Investigation of the Gas Sensing Performance Reproducibility for Colorectal Cancer Screening

Sensors ◽  
2020 ◽  
Vol 20 (20) ◽  
pp. 5910
Author(s):  
Andrea Gaiardo ◽  
Giulia Zonta ◽  
Sandro Gherardi ◽  
Cesare Malagù ◽  
Barbara Fabbri ◽  
...  
Keyword(s):  
Colorectal Cancer ◽  
Gas Sensors ◽  
Process Development ◽  
Gas Sensing ◽  
Diagnostic Tools ◽  
Fecal Samples ◽  
Recovery Times ◽  
Medical Diagnostic ◽  
Response And Recovery ◽  
Sensing Performance

Among the various chemoresistive gas sensing properties studied so far, the sensing response reproducibility, i.e., the capability to reproduce a device with the same sensing performance, has been poorly investigated. However, the reproducibility of the gas sensing performance is of fundamental importance for the employment of these devices in on-field applications, and to demonstrate the reliability of the process development. This sensor property became crucial for the preparation of medical diagnostic tools, in which the use of specific chemoresistive gas sensors along with a dedicated algorithm can be used for screening diseases. In this work, the reproducibility of SmFeO3 perovskite-based gas sensors has been investigated. A set of four SmFeO3 devices, obtained from the same screen-printing deposition, have been tested in laboratory with both controlled concentrations of CO and biological fecal samples. The fecal samples tested were employed in the clinical validation protocol of a prototype for non-invasive colorectal cancer prescreening. Sensors showed a high reproducibility degree, with an error lower than 2% of the response value for the test with CO and lower than 6% for fecal samples. Finally, the reproducibility of the SmFeO3 sensor response and recovery times for fecal samples was also evaluated.

Metal-oxide nanostructure and gas-sensing performance

2009 ◽  
Vol 138 (1) ◽  
pp. 113-119 ◽  
Author(s):  
R.L. Vander Wal ◽  
G.W. Hunter ◽  
J.C. Xu ◽  
M.J. Kulis ◽  
G.M. Berger ◽  
...  
Keyword(s):  
Metal Oxide ◽  
Gas Sensing ◽  
Sensing Performance
Sign in / Sign up

Export Citation Format

Share Document