Effect of pressure on the phase transformations and mechanical properties of 10 mol% Mg-PSZ sintered by HPHT

CrystEngComm ◽  
2022 ◽  
Author(s):  
Jian Wang ◽  
Zhiwen Wang ◽  
Yongkui Wang ◽  
Hongan Ma ◽  
Shuai Fang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
High Pressure ◽  
High Temperature ◽  
Phase Transformations ◽  
Stabilized Zirconia ◽  
Zirconia Ceramics ◽  
Effect Of Pressure ◽  
High Pressure High Temperature

MgO (10 mol%)-stabilized zirconia ceramics were obtained using high-pressure high-temperature (HPHT) sintering. The effects of the sintering pressure (2.5, 3.7, and 5.0 GPa) on the phase transformations and hardness were...

Phase transformations in solid C60 at high-pressure-high-temperature treatment and the structure of 3D polymerized fullerites

1996 ◽  
Vol 220 (1-3) ◽  
pp. 149-157 ◽  
Author(s):  
V.D. Blank ◽  
S.G. Buga ◽  
N.R. Serebryanaya ◽  
G.A. Dubitsky ◽  
S.N. Sulyanov ◽  
...  
Keyword(s):  
High Pressure ◽  
High Temperature ◽  
Phase Transformations ◽  
Temperature Treatment ◽  
High Temperature Treatment ◽  
High Pressure High Temperature

A Novel Method to Recycle Scrap Tires: High-Pressure High-Temperature Sintering

2002 ◽  
Vol 75 (5) ◽  
pp. 955-968 ◽  
Author(s):  
Jeremy E. Morin ◽  
Drew E. Williams ◽  
Richard J. Farris
Keyword(s):  
Mechanical Properties ◽  
High Pressure ◽  
High Temperature ◽  
Rubber Particle ◽  
Styrene Butadiene Rubber ◽  
Butadiene Rubber ◽  
Scrap Tires ◽  
Vulcanized Rubber ◽  
High Pressure High Temperature ◽  
Styrene Butadiene

Abstract High-pressure high-temperature sintering (HPHTS) is a novel recycling technique that makes it possible to recycle vulcanized rubber powders made from waste rubber (namely scrap tires) through only the application of heat and pressure. A brief look into the mechanism of sintering will be presented along with information about the influence of molding variables, such as time, temperature, pressure and rubber particle size on the mechanical properties of the produced parts. One of the most interesting observations is that powders of every crosslinked elastomer attempted sintered together via this technique, including silicone rubber (SI), sulfur cured [natural rubber (NR), ethylene-propylene-diene rubber (EPDM), styrene-butadiene rubber (SBR)], peroxide cured butadiene rubber (BR), and fluoroelastomers (FKM). Early work on sintered rubber made from commercially available rubber powder had a modulus of 1 to 2 MPa, strength of 4 to 7 MPa and an elongation at break of 150–250%. Recently, in-house ground samples of SBR have had sintered values over 9.5 MPa strength and 275% elongation, or greater than 60% retention of the original properties. Many of these mechanical properties are comparable with industrially manufactured rubbers, and it is believed that recycled rubbers produced via HPHTS offer the potential to replace virgin rubber in numerous applications.

Mechanical Properties of Si3N4-SiC Composites Sintered by HPHT Method

2010 ◽  
Vol 63 ◽  
pp. 396-401 ◽  
Author(s):  
Piotr Klimczyk
Keyword(s):  
Mechanical Properties ◽  
Fracture Toughness ◽  
High Pressure ◽  
High Temperature ◽  
Young Modulus ◽  
High Pressure High Temperature ◽  
Sic Composites

Three types: micro-, submicro- and nano-structured Si3N4-SiC composites have been obtained by High Pressure-High Temperature (HPHT) sintering. Density, Young modulus, hardness and fracture toughness have been measured. Composites obtained from sub-micron powders are characterized by better mechanical properties than composites obtained from nanopowders.

scholarly journals High-pressure synthesis and crystal structure of the mixed-cation borate Ga4In4B15O33(OH)3

2019 ◽  
Vol 74 (4) ◽  
pp. 357-363
Author(s):  
Daniela Vitzthum ◽  
Hubert Huppertz
Keyword(s):  
Crystal Structure ◽  
High Pressure ◽  
High Temperature ◽  
Diffraction Data ◽  
X Ray Diffraction ◽  
Synthesis And Crystal Structure ◽  
X Ray ◽  
Mixed Cation ◽  
High Pressure High Temperature ◽  
Pressure Synthesis

AbstractThe mixed cation triel borate Ga4In4B15O33(OH)3 was synthesized in a Walker-type multianvil apparatus at high-pressure/high-temperature conditions of 12.5 GPa and 1300°C. Although the product could not be reproduced in further experiments, its crystal structure could be reliably determined via single-crystal X-ray diffraction data. Ga4In4B15O33(OH)3 crystallizes in the tetragonal space group I41/a (origin choice 2) with the lattice parameters a = 11.382(2), c = 15.244(2) Å, and V = 1974.9(4) Å3. The structure of the quaternary triel borate consists of a complex network of BO4 tetrahedra, edge-sharing InO6 octahedra in dinuclear units, and very dense edge-sharing GaO6 octahedra in tetranuclear units.

Sign in / Sign up

Export Citation Format

Share Document