Low-cost and eco-friendly Br-doped Cu7Sn3S10 thermoelectric compound with zT around unit

2021 ◽  
Author(s):  
Tingting Deng ◽  
Pengfei Qiu ◽  
Tong Xing ◽  
Zhengyang Zhou ◽  
Tian-Ran Wei ◽  
...  
Keyword(s):  
Toxic Elements ◽  
Low Cost ◽  
Thermoelectric Performance ◽  
Ternary Compounds ◽  
Earth Abundant

Cu-Sn-S ternary compounds have attracted great attention in thermoelectric community because they are composed of low-cost, earth-abundant, and non-toxic elements. Among them, Cu7Sn3S10 shows promising thermoelectric performance in the middle...

High thermoelectric performance in low-cost SnS0.91Se0.09 crystals

Science ◽  
2019 ◽  
Vol 365 (6460) ◽  
pp. 1418-1424 ◽  
Author(s):  
Wenke He ◽  
Dongyang Wang ◽  
Haijun Wu ◽  
Yu Xiao ◽  
Yang Zhang ◽  
...  
Keyword(s):  
Thermoelectric Materials ◽  
High Performance ◽  
Carrier Mobility ◽  
Figure Of Merit ◽  
Toxic Elements ◽  
Low Cost ◽  
Thermoelectric Performance ◽  
Tin Sulfide ◽  
Temperature Dependent ◽  
Earth Abundant

Thermoelectric technology allows conversion between heat and electricity. Many good thermoelectric materials contain rare or toxic elements, so developing low-cost and high-performance thermoelectric materials is warranted. Here, we report the temperature-dependent interplay of three separate electronic bands in hole-doped tin sulfide (SnS) crystals. This behavior leads to synergistic optimization between effective mass (m*) and carrier mobility (μ) and can be boosted through introducing selenium (Se). This enhanced the power factor from ~30 to ~53 microwatts per centimeter per square kelvin (μW cm−1 K−2 at 300 K), while lowering the thermal conductivity after Se alloying. As a result, we obtained a maximum figure of merit ZT (ZTmax) of ~1.6 at 873 K and an average ZT (ZTave) of ~1.25 at 300 to 873 K in SnS0.91Se0.09 crystals. Our strategy for band manipulation offers a different route for optimizing thermoelectric performance. The high-performance SnS crystals represent an important step toward low-cost, Earth-abundant, and environmentally friendly thermoelectrics.

scholarly journals Defect and Doping Co-Engineered Non-Metal Nanocarbon ORR Electrocatalyst

2021 ◽  
Vol 13 (1) ◽  
Author(s):  
Jian Zhang ◽  
Jingjing Zhang ◽  
Feng He ◽  
Yijun Chen ◽  
Jiawei Zhu ◽  
...  
Keyword(s):  
Rational Design ◽  
Low Cost ◽  
Reduction Reaction ◽  
Defect Engineering ◽  
Heteroatom Doping ◽  
Competitive Activity ◽  
Design And Manufacturing ◽  
Earth Abundant ◽  
Induced Defects ◽  
Carbon Based

AbstractExploring low-cost and earth-abundant oxygen reduction reaction (ORR) electrocatalyst is essential for fuel cells and metal–air batteries. Among them, non-metal nanocarbon with multiple advantages of low cost, abundance, high conductivity, good durability, and competitive activity has attracted intense interest in recent years. The enhanced ORR activities of the nanocarbons are normally thought to originate from heteroatom (e.g., N, B, P, or S) doping or various induced defects. However, in practice, carbon-based materials usually contain both dopants and defects. In this regard, in terms of the co-engineering of heteroatom doping and defect inducing, we present an overview of recent advances in developing non-metal carbon-based electrocatalysts for the ORR. The characteristics, ORR performance, and the related mechanism of these functionalized nanocarbons by heteroatom doping, defect inducing, and in particular their synergistic promotion effect are emphatically analyzed and discussed. Finally, the current issues and perspectives in developing carbon-based electrocatalysts from both of heteroatom doping and defect engineering are proposed. This review will be beneficial for the rational design and manufacturing of highly efficient carbon-based materials for electrocatalysis.

scholarly journals Removal of Toxic Elements and Microbial Contaminants from Groundwater Using Low-Cost Treatment Options

2021 ◽  
Author(s):  
Dana A. Da’ana ◽  
Nabil Zouari ◽  
Mohammad Y. Ashfaq ◽  
Mohammed Abu-Dieyeh ◽  
Majeda Khraisheh ◽  
...  
Keyword(s):  
Cost Analysis ◽  
Toxic Elements ◽  
Low Cost ◽  
Treatment Technique ◽  
Groundwater Treatment ◽  
Efficient Treatment ◽  
Treatment Techniques ◽  
Cost Treatment ◽  
Treatment Technologies ◽  
Microbial Contaminants

Abstract Purpose of Review This paper reviews various low-cost treatment techniques such as adsorption, permeable reactive barrier, and biological techniques for the simultaneous removal of chemical and microbial contaminants from groundwater and discusses treatment mechanisms of different treatment techniques. This paper also discusses the challenges of groundwater treatment, how to choose the appropriate treatment technique, and cost analysis of groundwater treatment. Recent Findings Various treatment technologies have been used for the treatment of groundwater: physical, chemical, and biological technologies with different success rates. In the literature, various adsorbents have been successfully synthesized from low-cost and environmentally friendly materials. Adsorption is considered an efficient treatment technique for the removal of both toxic elements and pathogens by utilizing different adsorbents. For example, the nanostructures of MgO with a BET surface area of up to 171 m2/g obtained a very high adsorption capacity of 29,131 mg/g for fluoride ions in water, while the incorporation of iron in activated carbon has improved its adsorption capacity to 51.3 mg/g for arsenic. Moreover, certain adsorbents have shown the capability to remove 99% of the rotavirus and adenovirus from groundwater. Summary Groundwater resources are contaminated with toxic metals and pathogens. Therefore, water treatment technologies should be evaluated for their efficiency to remove such contaminants. Determination of the most cost-effective and efficient treatment technique is not an easy task and requires the understanding of various aspects such as the contaminants present in water, the reuse options considered, and cost analysis of the treatment technique.

scholarly journals Thermoelectric Performance of Mechanically Mixed BixSb2-xTe3—ABS Composites

Materials ◽  
2021 ◽  
Vol 14 (7) ◽  
pp. 1706
Author(s):  
Zacharias Viskadourakis ◽  
Argiri Drymiskianaki ◽  
Vassilis M. Papadakis ◽  
Ioanna Ioannou ◽  
Theodora Kyratsi ◽  
...  
Keyword(s):  
Polymer Composites ◽  
Large Scale ◽  
Low Cost ◽  
Acrylonitrile Butadiene Styrene ◽  
Thermoelectric Performance ◽  
Scale Production ◽  
Bismuth Antimony Telluride ◽  
Mechanical Mixing ◽  
Large Scale Production ◽  
Bi Doping

In the current study, polymer-based composites, consisting of Acrylonitrile Butadiene Styrene (ABS) and Bismuth Antimony Telluride (BixSb2−xTe3), were produced using mechanical mixing and hot pressing. These composites were investigated regarding their electrical resistivity and Seebeck coefficient, with respect to Bi doping and BixSb2-xTe3 loading into the composite. Experimental results showed that their thermoelectric performance is comparable—or even superior, in some cases—to reported thermoelectric polymer composites that have been produced using other complex techniques. Consequently, mechanically mixed polymer-based thermoelectric materials could be an efficient method for low-cost and large-scale production of polymer composites for potential thermoelectric applications.

scholarly journals Solid electrolyte interphases for high-energy aqueous aluminum electrochemical cells

2018 ◽  
Vol 4 (11) ◽  
pp. eaau8131 ◽  
Author(s):  
Qing Zhao ◽  
Michael J. Zachman ◽  
Wajdi I. Al Sadat ◽  
Jingxu Zheng ◽  
Lena F. Kourkoutis ◽  
...  
Keyword(s):  
Solid Electrolyte ◽  
Low Cost ◽  
High Energy ◽  
Electrochemical Cells ◽  
Interfacial Chemistry ◽  
Earth Abundant ◽  
Potential Benefits ◽  
High Specific Energy ◽  
Aqueous Aluminum ◽  
Safety Features

Electrochemical cells based on aluminum (Al) are of long-standing interest because Al is earth abundant, low cost, and chemically inert. The trivalent Al3+ ions also offer among the highest volume-specific charge storage capacities (8040 mAh cm−3), approximately four times larger than achievable for Li metal anodes. Rapid and irreversible formation of a high-electrical bandgap passivating Al2O3 oxide film on Al have, to date, frustrated all efforts to create aqueous Al-based electrochemical cells with high reversibility. Here, we investigate the interphases formed on metallic Al in contact with ionic liquid (IL)–eutectic electrolytes and find that artificial solid electrolyte interphases (ASEIs) formed spontaneously on the metal permanently transform its interfacial chemistry. The resultant IL-ASEIs are further shown to enable aqueous Al electrochemical cells with unprecedented reversibility. As an illustration of the potential benefits of these interphases, we create simple Al||MnO2 aqueous cells and report that they provide high specific energy (approximately 500 Wh/kg, based on MnO2 mass in the cathode) and intrinsic safety features required for applications.

scholarly journals Sodium-Doped Tin Sulfide Single Crystal: A Nontoxic Earth-Abundant Material with High Thermoelectric Performance

2018 ◽  
Vol 8 (20) ◽  
pp. 1800087 ◽  
Author(s):  
Hong Wu ◽  
Xu Lu ◽  
Guoyu Wang ◽  
Kunling Peng ◽  
Hang Chi ◽  
...  
Keyword(s):  
Single Crystal ◽  
Thermoelectric Performance ◽  
Tin Sulfide ◽  
Earth Abundant ◽  
Sulfide Single Crystal

Synergistic optimization of thermoelectric performance in earth-abundant Cu2ZnSnS4 by inclusion of graphene nanosheets

2020 ◽  
Vol 31 (36) ◽  
pp. 365402
Author(s):  
Sarita Devi Sharma ◽  
Khasimsaheb Bayikadi ◽  
Sankar Raman ◽  
S Neeleshwar
Keyword(s):  
Graphene Nanosheets ◽  
Thermoelectric Performance ◽  
Earth Abundant

scholarly journals Na2Fe(SO4)2: an anhydrous 3.6 V, low-cost and good-safety cathode for a rechargeable sodium-ion battery

2019 ◽  
Vol 7 (21) ◽  
pp. 13197-13204 ◽  
Author(s):  
Wenli Pan ◽  
Wenhao Guan ◽  
Shuangyu Liu ◽  
Ben Bin Xu ◽  
Chu Liang ◽  
...  
Keyword(s):  
Thermal Stability ◽  
High Voltage ◽  
Low Cost ◽  
High Thermal Stability ◽  
Sodium Ion ◽  
Moisture Resistance ◽  
Sodium Ion Battery ◽  
Sodium Ion Batteries ◽  
Earth Abundant

A new high-voltage earth-abundant cathode for sodium-ion batteries, Na2Fe(SO4)2, is reported, combining high thermal stability and good moisture resistance.

Sign in / Sign up

Export Citation Format

Share Document