Stable organic thermoelectric devices for self-powered sensor applications

2020 ◽  
Vol 8 (43) ◽  
pp. 22544-22556 ◽  
Author(s):  
Masakazu Mukaida ◽  
Kazuhiro Kirihara ◽  
Shohei Horike ◽  
Qingshuo Wei
Keyword(s):  
Thermoelectric Devices ◽  
Practical Applications ◽  
Sensor Applications ◽  
Self Powered

This review highlights recent pioneering studies involving the practical applications of organic thermoelectric devices.

scholarly journals Alcohol-based highly conductive polymer for conformal nanocoatings on hydrophobic surfaces toward a highly sensitive and stable pressure sensor

2020 ◽  
Vol 12 (1) ◽  
Author(s):  
Jung Joon Lee ◽  
Srinivas Gandla ◽  
Byeongjae Lim ◽  
Sunju Kang ◽  
Sunyoung Kim ◽  
...  
Keyword(s):  
Pressure Sensor ◽  
Mechanical Stability ◽  
Exchange Process ◽  
Conductive Polymer ◽  
High Sensitivity ◽  
Fast Response ◽  
Pdms Surface ◽  
Practical Applications ◽  
Sensor Applications ◽  
Water Based

Abstract Conformal and ultrathin coating of highly conductive PEDOT:PSS on hydrophobic uneven surfaces is essential for resistive-based pressure sensor applications. For this purpose, a water-based poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) solution was successfully exchanged to an organic solvent-based PEDOT:PSS solution without any aggregation or reduction in conductivity using the ultrafiltration method. Among various solvents, the ethanol (EtOH) solvent-exchanged PEDOT:PSS solution exhibited a contact angle of 34.67°, which is much lower than the value of 96.94° for the water-based PEDOT:PSS solution. The optimized EtOH-based PEDOT:PSS solution exhibited conformal and uniform coating, with ultrathin nanocoated films obtained on a hydrophobic pyramid polydimethylsiloxane (PDMS) surface. The fabricated pressure sensor showed high performances, such as high sensitivity (−21 kPa−1 in the low pressure regime up to 100 Pa), mechanical stability (over 10,000 cycles without any failure or cracks) and a fast response time (90 ms). Finally, the proposed pressure sensor was successfully demonstrated as a human blood pulse rate sensor and a spatial pressure sensor array for practical applications. The solvent exchange process using ultrafiltration for these applications can be utilized as a universal technique for improving the coating property (wettability) of conducting polymers as well as various other materials.

scholarly journals 2D Nanomaterials for Effective Energy Scavenging

2021 ◽  
Vol 13 (1) ◽  
Author(s):  
Md Al Mahadi Hasan ◽  
Yuanhao Wang ◽  
Chris R. Bowen ◽  
Ya Yang
Keyword(s):  
Large Scale ◽  
Waste Heat ◽  
Material Selection ◽  
Power Supplies ◽  
Small Scale ◽  
Energy Scavenging ◽  
Power Sources ◽  
Practical Applications ◽  
2D Nanomaterials ◽  
Self Powered

AbstractThe development of a nation is deeply related to its energy consumption. 2D nanomaterials have become a spotlight for energy harvesting applications from the small-scale of low-power electronics to a large-scale for industry-level applications, such as self-powered sensor devices, environmental monitoring, and large-scale power generation. Scientists from around the world are working to utilize their engrossing properties to overcome the challenges in material selection and fabrication technologies for compact energy scavenging devices to replace batteries and traditional power sources. In this review, the variety of techniques for scavenging energies from sustainable sources such as solar, air, waste heat, and surrounding mechanical forces are discussed that exploit the fascinating properties of 2D nanomaterials. In addition, practical applications of these fabricated power generating devices and their performance as an alternative to conventional power supplies are discussed with the future pertinence to solve the energy problems in various fields and applications.

scholarly journals Design and experimental analysis of dual-band polarization converting metasurface for microwave applications

2020 ◽  
Vol 10 (1) ◽  
Author(s):  
Bilawal Khan ◽  
Babar Kamal ◽  
Sadiq Ullah ◽  
Imran Khan ◽  
Jawad Ali Shah ◽  
...  
Keyword(s):  
Electromagnetic Waves ◽  
Polarization State ◽  
Plane Waves ◽  
Microwave Frequency ◽  
Dual Band ◽  
Orthogonal Polarization ◽  
Frequency Bands ◽  
Practical Applications ◽  
Sensor Applications ◽  
Polarized Waves

Abstract The manipulation of polarization state of electromagnetic waves is of great importance in many practical applications. In this paper, the reflection characteristics of a thin and dual-band metasurface are examined in the microwave frequency regime. The metasurface consists of a 22 × 22 element array of periodic unit cells. The geometry of the unit cell consists of three layers, including a 45° inclined dipole shape metal patch on top, which is backed by a 1.6 mm thick FR-4 substrate in the middle, and a fully reflective metallic mirror at the bottom. The proposed surface is exposed to horizontally (x) or vertically (y) polarized plane waves and the co and cross polarization reflection coefficients of the reflected waves are investigated experimentally in the 6–26 GHz frequency range. The metasurface is designed to convert incident waves of known polarization state (horizontal or vertical) to orthogonal polarization state (vertical and horizontal) in two distinct frequency bands, i.e. 7.1–8 GHz and 13.3–25.8 GHz. In these two frequency bands the simulated and experimental results are in good agreement. The polarization conversion ratio (PCR) of the surface is greater than 95% in the targeted frequency bands. A detailed parametric analysis of the metasurface is also discussed in this work and it has been estimated that the surface has the additional ability to convert linearly polarized waves to circularly polarized waves at several distinct frequencies. The proposed metasurface can be utilized in sensor applications, stealth technology, electromagnetic measurements, and antennas design.

scholarly journals Self-powered UV-visible photodetector with fast response and high photosensitivity employing an Fe:TiO2/n-Si heterojunction

RSC Advances ◽  
2017 ◽  
Vol 7 (81) ◽  
pp. 51744-51749 ◽  
Author(s):  
Lin Sun ◽  
Chunrui Wang ◽  
Tao Ji ◽  
Jiale Wang ◽  
Gyu-Chul Yi ◽  
...  
Keyword(s):  
Fast Response ◽  
Practical Applications ◽  
Uv Visible ◽  
Self Powered ◽  
High Photosensitivity

An ultrasensitive, fast response and self-powered photodetector would be preferable in practical applications.

scholarly journals Paper-based triboelectric nanogenerators and their applications: a review

2021 ◽  
Vol 12 ◽  
pp. 151-171
Author(s):  
Jing Han ◽  
Nuo Xu ◽  
Yuchen Liang ◽  
Mei Ding ◽  
Junyi Zhai ◽  
...  
Keyword(s):  
Energy Harvesting ◽  
Three Dimensional ◽  
Human Machine Interaction ◽  
Practical Applications ◽  
Energy Devices ◽  
Paper Electronics ◽  
Facile Fabrication ◽  
Self Powered ◽  
Triboelectric Nanogenerators ◽  
Energy Harvesting Devices

The development of industry and of the Internet of Things (IoTs) have brought energy issues and huge challenges to the environment. The emergence of triboelectric nanogenerators (TENGs) has attracted wide attention due to their advantages, such as self-powering, lightweight, and facile fabrication. Similarly to paper and other fiber-based materials, which are biocompatible, biodegradable, environmentally friendly, and are everywhere in daily life, paper-based TENGs (P-TENGs) have shown great potential for various energy harvesting and interactive applications. Here, a detailed summary of P-TENGs with two-dimensional patterns and three-dimensional structures is reported. P-TENGs have the potential to be used in many practical applications, including self-powered sensing devices, human–machine interaction, electrochemistry, and highly efficient energy harvesting devices. This leads to a simple yet effective way for the next generation of energy devices and paper electronics.

Flexible nanogenerators for self-powered touch and light sensor applications

2011 ◽  
Author(s):  
Keun Young Lee ◽  
Dukhyun Choi ◽  
Jae-Young Choi ◽  
Sang-Woo Kim
Keyword(s):  
Sensor Applications ◽  
Light Sensor ◽  
Self Powered

Resonance Tracking of Continua Using Self-Sensing Actuators

2012 ◽  
Vol 134 (5) ◽  
Author(s):  
Dominik Kern ◽  
Tobias Brack ◽  
Wolfgang Seemann
Keyword(s):  
Phase Difference ◽  
Power Transmission ◽  
Model Simplification ◽  
Practical Applications ◽  
Sensor Applications ◽  
Ultrasonic Motors ◽  
Harmonic Signals ◽  
Oscillation Modes ◽  
Linear Elements

This paper proposes and develops an innovative method to solve the resonance tracking problem for actuator and sensor applications to obtain maximum power transmission or signal selectivity using a modified phase-locked loop (PLL). The tracking of a higher eigenfrequency is very useful in some cases, but it is more challenging than the excitation of the only eigenfrequency of a 1-DoF system. The resonances are identified through employing their characteristic phase difference. The conventional PLL was modified to track a certain phase difference without deviation. The closed loop is a nonlinear control system due to the conversion between harmonic signals and phase signals. However, a model simplification to linear elements allows the goal oriented determination of the controller parameters. The advantages of self-sensing in combination with resonance tracking are attractive for practical applications such as ultrasonic motors and compact force sensors. The conducted experiments approved the effectiveness of the resonant excitation of higher oscillation modes of continua using self-sensing actuators.

Sign in / Sign up

Export Citation Format

Share Document