Nano-toughening of transparent wearable sensors with high sensitivity and a wide linear sensing range

2020 ◽  
Vol 8 (39) ◽  
pp. 20531-20542
Author(s):  
Shuhua Peng ◽  
Shuying Wu ◽  
Yuyan Yu ◽  
Philippe Blanloeuil ◽  
Chun H. Wang

A new highly sensitive and stretchable strain sensor with excellent linearity and optical transparency has been developed by toughening of microcracks within the thin conductive films.

2019 ◽  
Vol 10 ◽  
pp. 475-480 ◽  
Author(s):  
Jian Lv ◽  
Chuncai Kong ◽  
Chao Yang ◽  
Lu Yin ◽  
Itthipon Jeerapan ◽  
...  

A stable and highly sensitive graphene/hydrogel strain sensor is designed by introducing glycerol as a co-solvent in the formation of a hydrogel substrate and then casting a graphene solution onto the hydrogel in a simple, two-step method. This hydrogel-based strain sensor can effectively retain water in the polymer network due to the formation of strong hydrogen bonding between glycerol and water. The addition of glycerol not only enhances the stability of the hydrogel over a wider temperature range, but also increases the stretchability of the hydrogel from 800% to 2000%. The enhanced sensitivity can be attributed to the graphene film, whereby the graphene flakes redistribute to optimize the contact area under different strains. The careful design enables this sensor to be used in both stretching and bending modes. As a demonstration, the as-prepared strain sensor was applied to sense the movement of finger knuckles. Given the outstanding performance of this wearable sensor, together with the proposed scalable fabrication method, this stable and sensitive hydrogel strain sensor is considered to have great potential in the field of wearable sensors.


Sensors ◽  
2019 ◽  
Vol 19 (22) ◽  
pp. 4867 ◽  
Author(s):  
Sung-Yeob Jeong ◽  
Yong-Won MA ◽  
Jun-Uk Lee ◽  
Gyeong-Ju Je ◽  
Bo-sung Shin

A laser-induced-graphene (LIG) pattern fabricated using a 355 nm pulsed laser was applied to a strain sensor. Structural analysis and functional evaluation of the LIG strain sensor were performed by Raman spectroscopy, scanning electron microscopy (SEM) imaging, and electrical–mechanical coupled testing. The electrical characteristics of the sensor with respect to laser fluence and focal length were evaluated. The sensor responded sensitively to small deformations, had a high gauge factor of ~160, and underwent mechanical fracture at 30% tensile strain. In addition, we have applied the LIG sensor, which has high sensitivity, a simple manufacturing process, and good durability, to human finger motion monitoring.


2018 ◽  
Vol 2 (2) ◽  
pp. 355-361 ◽  
Author(s):  
Xi Fan ◽  
Naixiang Wang ◽  
Jinzhao Wang ◽  
Bingang Xu ◽  
Feng Yan

A stretchable plastic strain sensor was fabricated, showing high sensitivity and a broad strain-sensing region with good durability.


2020 ◽  
Vol 12 (15) ◽  
pp. 17691-17698 ◽  
Author(s):  
Yuxiang Li ◽  
Tengyu He ◽  
Liangjing Shi ◽  
Ranran Wang ◽  
Jing Sun

Nanoscale ◽  
2018 ◽  
Vol 10 (28) ◽  
pp. 13599-13606 ◽  
Author(s):  
Binghao Liang ◽  
Zhiqiang Lin ◽  
Wenjun Chen ◽  
Zhongfu He ◽  
Jing Zhong ◽  
...  

A highly stretchable and sensitive strain sensor based on a gradient carbon nanotube was developed. The strain sensors show an unprecedented combination of both high sensitivity (gauge factor = 13.5) and ultra-stretchability (>550%).


2021 ◽  
Vol 2021 ◽  
pp. 1-9
Author(s):  
Jie Wang ◽  
Yi Du ◽  
Qiang Zhang ◽  
Zhu Jing ◽  
Kai Zhuo ◽  
...  

The sensitivity improvement is the choke point of the soft strain sensor’s development. This paper focuses on heightening the soft strain sensor’s sensitivity through changing the sensitive unit’s shape. The sensitive units in shape of square or sine wave with different periods were studied in this work. Silver nanowires (Ag NWs) in excellent electrical conductivity and flexible polydimethylsiloxane (PDMS) were used as sensitive nanomaterials and soft substrate. The soft strain sensor whose sensitive unit is double cycled square wave performs the highest sensitivity whose gauge factor (GF) reaches to 14763.8. Based on the high sensitivity, the sensor was applied on real-time detection of the human expression.


2021 ◽  
Author(s):  
Suresh Nuthalapati ◽  
Vaishakh Kedambaimoole ◽  
Vijay Shirhatti ◽  
Saurabh Kumar ◽  
Hidekuni Takao ◽  
...  

2021 ◽  
pp. 004051752110441
Author(s):  
Qinghua Yu ◽  
Jinhua Jiang ◽  
Chuanli Su ◽  
Yaoli Huang ◽  
Nanliang Chen ◽  
...  

Flexible wearable strain sensors with excellent sensing performance have received widespread interest due to their superior application capability in the field of human-computer interaction, sports rehabilitation, and disease diagnosis. But at present, it is still a considerable challenge to exploit a flexible strain sensor with high sensitivity and wide sensing range that is easily manufactured, low-cost, and easily integrable into clothing. MXene is a promising material sensitive enough for flexible sensors due to its superior conductivity and hydrophilicity. The warp knitting weft insertion textile structure gives the fabric excellent elasticity, making it suitable as a flexible, stretchable substrate. Therefore, utilizing a polyester elastic fabric with a warp knitting weft insertion structure, a fabric strain sensor with high sensitivity and wide sensing range prepared by layer-by-layer self-assembly of polyvinyl alcohol layers and MXene layers is reported in this study. The strain sensor exhibits high sensitivity (up to 288.43), a wide sensing range (up to 50%), fast response time (50 ms), ultra-low detection limit (a strain of 0.067%), excellent cycle stability (1000 cycles), and good washability. Besides, affixing the MXene/polyvinyl alcohol/polyester elastic fabric strain sensor on the joints can detect the movement of limbs. Therefore, the MXene/polyvinyl alcohol/polyester elastic fabric strain sensor demonstrates potential application opportunities in smart wearable electronic devices, and the researcher can also apply this method in the production of other flexible, intelligent wearable devices.


Sign in / Sign up

Export Citation Format

Share Document