scholarly journals Drop impact on hot plates: contact times, lift-off and the lamella rupture

Soft Matter ◽  
2020 ◽  
Vol 16 (34) ◽  
pp. 7935-7949 ◽  
Author(s):  
Sang-Hyeon Lee ◽  
Kirsten Harth ◽  
Maaike Rump ◽  
Minwoo Kim ◽  
Detlef Lohse ◽  
...  
Keyword(s):  
High Speed ◽  
Drop Impact ◽  
Contact Duration ◽  
Liquid Drops ◽  
X Ray ◽  
Refraction Method ◽  
Lift Off

Reliable contact and rebound times of liquid drops impacting on hot plane substrates are measured by a new high-speed X-ray refraction method and optically by TIR. Lamella rupture reduces the contact duration at intermediate temperatures.

Jet Initiation After Drop Impact on Micropatterned Hydrophilic Surfaces

2019 ◽  
Author(s):  
Anayet Ullah Siddique ◽  
Feng Zhao ◽  
Mark Weislogel ◽  
Hua Tan
Keyword(s):  
High Speed ◽  
Dynamic Properties ◽  
Substrate Surface ◽  
Droplet Diameter ◽  
Drop Impact ◽  
Liquid Droplets ◽  
Jet Formation ◽  
Lift Off ◽  
Micro Pillars ◽  
Jet Initiation

Abstract Droplet-wall impacts are well known to produce a wide variety of outcomes such as spreading, splashing, jetting, receding, and rebounding from hydrophobic and superhydrophobic surfaces. In this work, we focus on the growth of jets that form during the partial recoil of liquid droplets that impinge upon hydrophilic substrates composed of cylindrical micro-pillars of various dimensions and distributions (i.e., height, width, pillar spacing, etc.). Micro-pillars are fabricated on the hydrophilic silicon wafers by standard microfabrication processes, including metal etch mask patterning by photolithography, metal deposition, and lift-off to achieve the designed pillar shapes and spacing, and followed by dry etching for various pillar heights. Micrometer-sized drops of glycerol mixtures impacting micro-structured wafers are investigated using high-speed video photography. Impact velocities are varied to observe the influence of Weber number on the dynamic properties of the rebounding jet and jet initiation time, as well as whether or not the jet detaches ejecting satellite droplets normal to the substrate surface. The specific influence of the micro-patterned surfaces on maximum spreading, jet formation, jet tip velocity, and jet ejection is characterized. We find that the micro-patterned substrates have a significant effect on the behavior of the drop impact and jetting mechanism. From our experiments, we find that jet velocity is approximately 4 times that of the drop impact velocity. The jet formation time is shown to follow the capillary time scale as (ρDi3/σ)½ (where ρ, Di, and σ are density, initial droplet diameter, and surface tension, respectively).

Splashing from drop impact into a deep pool: multiplicity of jets and the failure of conventional scaling

2012 ◽  
Vol 703 ◽  
pp. 402-413 ◽  
Author(s):  
L. V. Zhang ◽  
J. Toole ◽  
K. Fezzaa ◽  
R. D. Deegan
Keyword(s):  
Dynamic Viscosity ◽  
High Speed ◽  
Drop Impact ◽  
X Ray ◽  
Intermediate Size ◽  
Secondary Droplets ◽  
The Impact ◽  
Gas Properties

AbstractWe report high-speed optical and X-ray observations of jets formed during the impact of a drop with a deep pool of the same liquid. We show that a scaling that relies entirely on liquid properties, as is conventionally employed, is insufficient to determine the threshold for splashing. In order to determine if the gas properties could account for this deficit, we conducted experiments with different surrounding gases. We find that the splashing threshold depends on the gas’s dynamic viscosity, but not its density. We argue that these results are consistent with a thickening of the ejecta caused by the bubble trapped on impact between the drop and the pool. We also show that drop impact can generate a third jet, distinct from the lamella and the ejecta, that produces secondary droplets of an intermediate size.

Scanning x-ray fluorescence microscopy and principal component analysis

1992 ◽  
Vol 50 (2) ◽  
pp. 1752-1753
Author(s):  
Brian Cross
Keyword(s):  
Principal Component Analysis ◽  
Fluorescence Microscopy ◽  
Spatial Resolution ◽  
High Speed ◽  
Image Acquisition ◽  
Principal Component ◽  
Fluorescence Microscope ◽  
Acquisition Rate ◽  
X Ray ◽  
Speed Up

A relatively new entry, in the field of microscopy, is the Scanning X-Ray Fluorescence Microscope (SXRFM). Using this type of instrument (e.g. Kevex Omicron X-ray Microprobe), one can obtain multiple elemental x-ray images, from the analysis of materials which show heterogeneity. The SXRFM obtains images by collimating an x-ray beam (e.g. 100 μm diameter), and then scanning the sample with a high-speed x-y stage. To speed up the image acquisition, data is acquired "on-the-fly" by slew-scanning the stage along the x-axis, like a TV or SEM scan. To reduce the overhead from "fly-back," the images can be acquired by bi-directional scanning of the x-axis. This results in very little overhead with the re-positioning of the sample stage. The image acquisition rate is dominated by the x-ray acquisition rate. Therefore, the total x-ray image acquisition rate, using the SXRFM, is very comparable to an SEM. Although the x-ray spatial resolution of the SXRFM is worse than an SEM (say 100 vs. 2 μm), there are several other advantages.

PHAX-SCAN: Functional integration of a Scanning Electron Microscope and an energy-dispersive x-ray analyser

1989 ◽  
Vol 47 ◽  
pp. 56-57
Author(s):  
Marc H. Peeters ◽  
Max T. Otten
Keyword(s):  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
High Speed ◽  
High Performance ◽  
Functional Integration ◽  
Energy Dispersive ◽  
X Rays ◽  
X Ray ◽  
High Speed Analysis ◽  
Scanning Electron

Over the past decades, the combination of energy-dispersive analysis of X-rays and scanning electron microscopy has proved to be a powerful tool for fast and reliable elemental characterization of a large variety of specimens. The technique has evolved rapidly from a purely qualitative characterization method to a reliable quantitative way of analysis. In the last 5 years, an increasing need for automation is observed, whereby energy-dispersive analysers control the beam and stage movement of the scanning electron microscope in order to collect digital X-ray images and perform unattended point analysis over multiple locations.The Philips High-speed Analysis of X-rays system (PHAX-Scan) makes use of the high performance dual-processor structure of the EDAX PV9900 analyser and the databus structure of the Philips series 500 scanning electron microscope to provide a highly automated, user-friendly and extremely fast microanalysis system. The software that runs on the hardware described above was specifically designed to provide the ultimate attainable speed on the system.

Growth Mechanisms of Faceted Al 3Fe Intermetallic Revealed by High-Speed Synchrotron X-Ray Quantification

2020 ◽  
Author(s):  
Zihan Song ◽  
Oxana Magdysyuk ◽  
Lei Tang ◽  
Tay Sparks ◽  
Biao Cai
Keyword(s):  
High Speed ◽  
Growth Mechanisms ◽  
X Ray

scholarly journals X-ray Determination of Compressive Residual Stresses in Spring Steel Generated by High-Speed Water Quenching

Materials ◽  
2019 ◽  
Vol 12 (7) ◽  
pp. 1154
Author(s):  
Diego E. Lozano ◽  
George E. Totten ◽  
Yaneth Bedolla-Gil ◽  
Martha Guerrero-Mata ◽  
Marcel Carpio ◽  
...  
Keyword(s):  
Heat Treatment ◽  
Residual Stresses ◽  
High Speed ◽  
Spring Steel ◽  
X Ray Diffraction ◽  
Laboratory Equipment ◽  
X Ray ◽  
Water Chamber ◽  
Hardened Case ◽  
Compressive Residual Stresses

Automotive components manufacturers use the 5160 steel in leaf and coil springs. The industrial heat treatment process consists in austenitizing followed by the oil quenching and tempering process. Typically, compressive residual stresses are induced by shot peening on the surface of automotive springs to bestow compressive residual stresses that improve the fatigue resistance and increase the service life of the parts after heat treatment. In this work, a high-speed quenching was used to achieve compressive residual stresses on the surface of AISI/SAE 5160 steel samples by producing high thermal gradients and interrupting the cooling in order to generate a case-core microstructure. A special laboratory equipment was designed and built, which uses water as the quenching media in a high-speed water chamber. The severity of the cooling was characterized with embedded thermocouples to obtain the cooling curves at different depths from the surface. Samples were cooled for various times to produce different hardened case depths. The microstructure of specimens was observed with a scanning electron microscope (SEM). X-ray diffraction (XRD) was used to estimate the magnitude of residual stresses on the surface of the specimens. Compressive residual stresses at the surface and sub-surface of about −700 MPa were obtained.

scholarly journals Fingerprinting shock-induced deformations via diffraction

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Avanish Mishra ◽  
Cody Kunka ◽  
Marco J. Echeverria ◽  
Rémi Dingreville ◽  
Avinash M. Dongare
Keyword(s):  
High Speed ◽  
Shock Loading ◽  
Dislocation Slip ◽  
Line Profiles ◽  
X Ray Diffraction ◽  
Final State ◽  
X Ray ◽  
Shock Testing ◽  
Local Pressures ◽  
Deformation Modes

AbstractDuring the various stages of shock loading, many transient modes of deformation can activate and deactivate to affect the final state of a material. In order to fundamentally understand and optimize a shock response, researchers seek the ability to probe these modes in real-time and measure the microstructural evolutions with nanoscale resolution. Neither post-mortem analysis on recovered samples nor continuum-based methods during shock testing meet both requirements. High-speed diffraction offers a solution, but the interpretation of diffractograms suffers numerous debates and uncertainties. By atomistically simulating the shock, X-ray diffraction, and electron diffraction of three representative BCC and FCC metallic systems, we systematically isolated the characteristic fingerprints of salient deformation modes, such as dislocation slip (stacking faults), deformation twinning, and phase transformation as observed in experimental diffractograms. This study demonstrates how to use simulated diffractograms to connect the contributions from concurrent deformation modes to the evolutions of both 1D line profiles and 2D patterns for diffractograms from single crystals. Harnessing these fingerprints alongside information on local pressures and plasticity contributions facilitate the interpretation of shock experiments with cutting-edge resolution in both space and time.

Simulation and Experiment on the Residual Stress in Super-High Speed Grinding

2010 ◽  
Vol 135 ◽  
pp. 238-242
Author(s):  
Yue Ming Liu ◽  
Ya Dong Gong ◽  
Wei Ding ◽  
Ting Chao Han
Keyword(s):  
Residual Stress ◽  
High Speed ◽  
Element Model ◽  
Residual Stress Distribution ◽  
X Ray Diffraction ◽  
Machined Surface ◽  
X Ray ◽  
High Speed Grinding ◽  
Simulation And Experiment ◽  
Cylindrical Workpiece

In this paper, effective finite element model have been developed to simulation the plastic deformation cutting in the process for a single particle via the software of ABAQUS, observing the residual stress distribution in the machined surface, the experiment of grinding cylindrical workpiece has been brought in the test of super-high speed grinding, researching the residual stress under the machined surface by the method of X-ray diffraction, which can explore the different stresses from different super-high speed in actual, and help to analyze the means of reducing the residual stresses in theory.

scholarly journals Plasma Fabrication and SERS Functionality of Gold Crowned Silicon Submicrometer Pillars

Materials ◽  
2020 ◽  
Vol 13 (5) ◽  
pp. 1244 ◽  
Author(s):  
Paola Pellacani ◽  
Carlo Morasso ◽  
Silvia Picciolini ◽  
Dario Gallach ◽  
Lucia Fornasari ◽  
...  
Keyword(s):  
Raman Spectroscopy ◽  
Surface Enhanced Raman Spectroscopy ◽  
Post Processing ◽  
Advanced Material ◽  
X Ray ◽  
Colloidal Monolayer ◽  
Surface Enhanced ◽  
Surface Enhanced Raman ◽  
Lift Off ◽  
X Ray Absorption

Sequential plasma processes combined with specific lithographic methods allow for the fabrication of advanced material structures. In the present work, we used self-assembled colloidal monolayers as lithographic structures for the conformation of ordered Si submicrometer pillars by reactive ion etching. We explored different discharge conditions to optimize the Si pillar geometry. Selected structures were further decorated with gold by conventional sputtering, prior to colloidal monolayer lift-off. The resulting structures consist of a gold crown, that is, a cylindrical coating on the edge of the Si pillar and a cavity on top. We analysed the Au structures in terms of electronic properties by using X-ray absorption spectroscopy (XAS) prior to and after post-processing with thermal annealing at 300 °C and/or interaction with a gold etchant solution (KI). The angular dependent analysis of the plasmonic properties was studied with Fourier transformed UV-vis measurements. Certain conditions were selected to perform a surface enhanced Raman spectroscopy (SERS) evaluation of these platforms with two model dyes, prior to confirming the potential interest for a well-resolved analysis of filtered blood plasma.

Sign in / Sign up

Export Citation Format

Share Document