scholarly journals Tungsten-substituted molybdophosphoric acid impregnated with kaolin: effective catalysts for the synthesis of 3,4-dihydropyrimidin-2(1H)-ones via biginelli reaction

RSC Advances ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 2783-2792
Author(s):  
Dipak S. Aher ◽  
Kiran R. Khillare ◽  
Laxmikant D. Chavan ◽  
Sunil G. Shankarwar
Keyword(s):  
Catalytic Activity ◽  
Biginelli Reaction ◽  
Kaolin Clay ◽  
Impregnation Method ◽  
Molybdophosphoric Acid

In this paper, synthesize tungsten-substituted molybdophosphoric acid (H3PMo7W5O40·24H2O) and impregnated with kaolin clay by wetness impregnation method. The catalytic activity explored for synthesis of 3,4-dihydropyrimidin-2(1H)-ones (DHPM) via Biginelli reaction.

scholarly journals Performance Analysis of TiO2-Modified Co/MgAl2O4 Catalyst for Dry Reforming of Methane in a Fixed Bed Reactor for Syngas (H2, CO) Production

Energies ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 3347
Author(s):  
Arslan Mazhar ◽  
Asif Hussain Khoja ◽  
Abul Kalam Azad ◽  
Faisal Mushtaq ◽  
Salman Raza Naqvi ◽  
...  
Keyword(s):  
Catalytic Activity ◽  
Fixed Bed ◽  
Catalytic Performance ◽  
Dry Reforming ◽  
Fixed Bed Reactor ◽  
Dry Reforming Of Methane ◽  
Catalyst Stability ◽  
Feed Ratio ◽  
Catalyst Loading ◽  
Impregnation Method

Co/TiO2–MgAl2O4 was investigated in a fixed bed reactor for the dry reforming of methane (DRM) process. Co/TiO2–MgAl2O4 was prepared by modified co-precipitation, followed by the hydrothermal method. The active metal Co was loaded via the wetness impregnation method. The prepared catalyst was characterized by XRD, SEM, TGA, and FTIR. The performance of Co/TiO2–MgAl2O4 for the DRM process was investigated in a reactor with a temperature of 750 °C, a feed ratio (CO2/CH4) of 1, a catalyst loading of 0.5 g, and a feed flow rate of 20 mL min−1. The effect of support interaction with metal and the composite were studied for catalytic activity, the composite showing significantly improved results. Moreover, among the tested Co loadings, 5 wt% Co over the TiO2–MgAl2O4 composite shows the best catalytic performance. The 5%Co/TiO2–MgAl2O4 improved the CH4 and CO2 conversion by up to 70% and 80%, respectively, while the selectivity of H2 and CO improved to 43% and 46.5%, respectively. The achieved H2/CO ratio of 0.9 was due to the excess amount of CO produced because of the higher conversion rate of CO2 and the surface carbon reaction with oxygen species. Furthermore, in a time on stream (TOS) test, the catalyst exhibited 75 h of stability with significant catalytic activity. Catalyst potential lies in catalyst stability and performance results, thus encouraging the further investigation and use of the catalyst for the long-run DRM process.

Facile synthesis of cubical Co3O4 supported Au nanocomposites with high activity for the reduction of 4-nitrophenol to 4-aminophenol

RSC Advances ◽  
2016 ◽  
Vol 6 (39) ◽  
pp. 32430-32433 ◽  
Author(s):  
Yuwen Yang ◽  
Yongyun Mao ◽  
Bin Wang ◽  
Xianwei Meng ◽  
Jiao Han ◽  
...  
Keyword(s):  
Catalytic Activity ◽  
High Activity ◽  
Impregnation Method ◽  
Facile Synthesis ◽  
Turn Over Frequency ◽  
Turn Over

A facile impregnation method has been successfully applied for synthesis of a cubical Co3O4 supported Au nanocomposites, which leads to the excellent catalytic activity for the reduction of 4-nitrophenol with a high turn over frequency of 9.83 min−1.

scholarly journals Palladium-Supported Zirconia-Based Catalytic Degradation of Rhodamine-B Dye from Wastewater

Water ◽  
2021 ◽  
Vol 13 (11) ◽  
pp. 1522
Author(s):  
Salma Jabeen ◽  
Muhammad Sufaid Khan ◽  
Rozina Khattak ◽  
Ivar Zekker ◽  
Juris Burlakovs ◽  
...  
Keyword(s):  
Catalytic Activity ◽  
Rhodamine B ◽  
Dye Degradation ◽  
Freundlich Isotherm ◽  
Impregnation Method ◽  
K Value ◽  
First Order Kinetics ◽  
Good Catalytic Activity ◽  
Rhodamine B Dye ◽  
Best Fit

The catalytic activity of Pd/ZrO2 was studied in terms of the degradation of rhodamine-B dye in the presence of hydrogen peroxide. Pd/ZrO2 was prepared by impregnation method, calcined at 750 °C and characterized by XRD, SEM and EDX. The catalyst showed good catalytic activity for dye degradation at 333 K, using 0.05 g of the catalyst during 5 h. The reaction kinetics followed the pseudo-first order kinetics. The Freundlich, Langmuir and Temkin isotherms were applied to the data and the best fit was obtained with Freundlich isotherm. Thermodynamic parameters, like ΔH, ΔG and ΔS were also calculated. The negative values of ΔH (−291.406 KJ/mol) and Gibbs free energy (ΔG) showed the exothermic and spontaneous nature of the process. The positive ΔS (0.04832 KJ/mol K) value showed suitable affinity of catalyst for dye degradation. The catalyst was very stable, active and was easily separated from the reaction mixture by filtration. It can be concluded from the results that the prepared catalyst could be effectively used in dyes degradation/removal from water subjected to further validation and use for various dyes.

Property of Cu2O-CuO/ZSM-5 nanocomposite and degradation process of azo dye AO7 without sacrificial agent (H2O2)

2016 ◽  
Vol 73 (11) ◽  
pp. 2747-2753 ◽  
Author(s):  
Wusong Kong ◽  
Hongxia Qu ◽  
Peng Chen ◽  
Weihua Ma ◽  
Huifang Xie
Keyword(s):  
Catalytic Activity ◽  
Aqueous Solutions ◽  
Photoelectron Spectroscopy ◽  
Oxygen Demand ◽  
Operating Conditions ◽  
Surface Element ◽  
Impregnation Method ◽  
X Ray ◽  
Initial Ph ◽  
Sacrificial Agent

In this study, Cu2O-CuO/ZSM-5 nanocomposite was synthesized by the impregnation method, and its catalytic performance for the destruction of AO7 in aqueous solutions was investigated. The morphology, structure and surface element valence state of Cu2O-CuO/ZSM-5 were characterized by transmission electron microscopy, X-ray diffraction and X-ray photoelectron spectroscopy. The operating conditions on the degradation of AO7 by Cu2O-CuO/ZSM-5, such as initial pH values, concentration of AO7 and catalyst dosage were investigated and optimized. The results showed that the sample had good catalytic activity for destruction of AO7 in the absence of a sacrificial agent (e.g. H2O2): it could degrade 91% AO7 in 140 min at 25 °C and was not restricted by the initial pH of the AO7 aqueous solutions. Cu2O-CuO/ZSM-5 exhibited stable catalytic activity with little loss after three successive runs. The total organic carbon and chemical oxygen demand removal efficiencies increased rapidly to 69.36% and 67.3% after 120 min of treatment by Cu2O-CuO/ZSM-5, respectively.

scholarly journals Effect of Fe Additives on the Catalytic Performance of Ion-Exchanged CsX Zeolites for Side-Chain Alkylation of Toluene with Methanol

Catalysts ◽  
2019 ◽  
Vol 9 (10) ◽  
pp. 829 ◽  
Author(s):  
Zhang ◽  
Yuan ◽  
Miao ◽  
Li ◽  
Shan ◽  
...  
Keyword(s):  
Catalytic Activity ◽  
Catalytic Performance ◽  
High Yield ◽  
Side Chain ◽  
Impregnation Method ◽  
Basic Sites ◽  
Lewis Acidic Sites ◽  
X Zeolite ◽  
Acidic Sites ◽  
Negative Effect

The side-chain alkylation of toluene with methanol was investigated over some Fe-modified Cs ion-exchanged X zeolite (CsX) catalysts prepared via the impregnation method using different iron sources. The absorption/activation behaviors of the reactants on the surface of the catalysts were studied by in situ Fourier-transform infrared (FT-IR) spectroscopy and temperature programmed desorption (TPD) mass measurements. Modification of CsX with a small amount of FeCl3 could result in a considerable decrease in catalytic activity, due mainly to the remarkable decrease in the density of acidic and basic sites of the catalysts. Interestingly, the Fe(NO3)3-modified CsX with an optimum Fe loading of 0.15 wt.% shows improved catalytic activity and high yield compared to the side-chain alkylation products. Modification of CsX with Fe(NO3)3 could also result in a decrease in basic sites of the catalyst. However, such a change does not bring an obvious negative effect on the adsorption/activation of toluene, while it could effectively inhibit the generation of the undesired bidentate formate. Furthermore, the introduced FeOx species (derived from the decomposition of Fe(NO3)3) may also act as new Lewis acidic sites to participate in the activation of methanol and to stabilize the formed active intermediates (i.e., unidentate formate). Therefore, modification of CsX with a suitable amount of Fe(NO3)3 may adjust its adsorption/activation ability for reagents by changing the acid–base properties of the catalyst, which can finally enhance the catalytic performance for the side-chain alkylation of toluene with methanol.

scholarly journals Hydrogen Production From Steam Gasification of Palm Kernel Shell Using Sequential Impregnation Bimetallic Catalysts

2021 ◽  
Vol 14 ◽  
pp. 58-62
Author(s):  
Anita Ramli ◽  
Siti Eda Eliana Misi ◽  
Mas Fatiha Mohamad ◽  
Suzana Yusup
Keyword(s):  
Catalytic Activity ◽  
Fixed Bed ◽  
Palm Kernel ◽  
Steam Gasification ◽  
Impregnation Method ◽  
Ni Catalysts ◽  
Palm Kernel Shell ◽  
Calcination Temperatures ◽  
Zeolite Β ◽  
Metal Addition

Zeolite β supported bimetallic Fe and Ni catalysts have been prepared using sequential impregnation method and calcined at temperatures between 500-700 ºC. The catalytic activity of these catalysts in a steam gasification of palm kernel shell was tested in a fixed-bed quartz micro-reactor at 700 ºC. Both Fe and Ni active metals present in FeNi/BEA and NiFe/BEA catalysts are corresponding to Fe2O3 and NiO. Different calcination temperatures and different sequence in metal addition have a significant effect to the catalytic activity where FeNi/BEA (700) shows the highest hydrogen produced than other catalysts.

scholarly journals CO Oxidation over Metal Oxide (La2O3, Fe2O3, PrO2, Sm2O3, and MnO2) Doped CuO-Based Catalysts Supported on Mesoporous Ce0.8Zr0.2O2 with Intensified Low-Temperature Activity

Catalysts ◽  
2019 ◽  
Vol 9 (9) ◽  
pp. 724 ◽  
Author(s):  
Yan Cui ◽  
Leilei Xu ◽  
Mindong Chen ◽  
Chufei Lv ◽  
Xinbo Lian ◽  
...  
Keyword(s):  
Catalytic Activity ◽  
Low Temperature ◽  
Metal Oxide ◽  
Metal Oxides ◽  
Co Oxidation ◽  
Active Sites ◽  
Earth Metal ◽  
High Dispersion ◽  
Impregnation Method ◽  
X Ray

CuO-based catalysts are usually used for CO oxidation owing to their low cost and excellent catalytic activities. In this study, a series of metal oxide (La2O3, Fe2O3, PrO2, Sm2O3, and MnO2)-doped CuO-based catalysts with mesoporous Ce0.8Zr0.2O2 support were simply prepared by the incipient impregnation method and used directly as catalysts for CO catalytic oxidation. These mesoporous catalysts were systematically characterized by X-ray powder diffraction (XRD), N2 physisorption, transmission electron microscopy (TEM), energy-dispersed spectroscopy (EDS) mapping, X-ray photoelectron spectroscopy (XPS), and H2 temperature programmed reduction (H2-TPR). It was found that the CuO and the dopants were highly dispersed among the mesoporous framework via the incipient impregnation method, and the strong metal framework interaction had been formed. The effects of the types of the dopants and the loading amounts of the dopants on the low-temperature catalytic performances were carefully studied. It was concluded that doped transition metal oxides could regulate the oxygen mobility and reduction ability of catalysts, further improving the catalytic activity. It was also found that the high dispersion of rare earth metal oxides (PrO2, Sm2O3) was able to prevent the thermal sintering and aggregation of CuO-based catalysts during the process of calcination. In addition, their presence also evidently improved the reducibility and significantly reduced the particle size of the CuO active sites for CO oxidation. The results demonstrated that the 15CuO-3Fe2O3/M-Ce80Zr20 catalyst with 3 wt. % of Fe2O3 showed the best low-temperature catalytic activity toward CO oxidation. Overall, the present Fe2O3-doped CuO-based catalysts with mesoporous nanocrystalline Ce0.8Zr0.2O2 solid solution as support were considered a promising series of catalysts for low-temperature CO oxidation.

scholarly journals Catalytic Oxidation of Chlorobenzene over Pd-TiO2 /Pd-Ce/TiO2 Catalysts

Catalysts ◽  
2020 ◽  
Vol 10 (3) ◽  
pp. 347 ◽  
Author(s):  
Wenjun Liang ◽  
Xiaoyan Du ◽  
Yuxue Zhu ◽  
Sida Ren ◽  
Jian Li
Keyword(s):  
Catalytic Activity ◽  
Catalytic Oxidation ◽  
Calcination Temperature ◽  
Catalyst Activity ◽  
Space Velocity ◽  
Impregnation Method ◽  
Tio2 Catalyst ◽  
Metal Support ◽  
Oxidation Efficiency

A series of Pd-TiO2/Pd-Ce/TiO2 catalysts were prepared by an equal volume impregnation method. The effects of different Pd loadings on the catalytic activity of chlorobenzene (CB) were investigated, and the results showed that the activity of the 0.2%-0.3% Pd/TiO2 catalyst was optimal. The effect of Ce doping enhanced the catalytic activity of the 0.2% Pd-0.5% Ce/TiO2 catalyst. The characterization of the catalysts using BET, TEM, H2-TPR, and O2-TPD showed that the oxidation capacity was enhanced, and the catalytic oxidation efficiency was improved due to the addition of Ce. Ion chromatography and Gas Chromatography-Mass Spectrometer results showed that small amounts of dichlorobenzene (DCB) and trichlorobenzene (TCB) were formed during the decomposition of CB. The results also indicated that the calcination temperature greatly influenced the catalyst activity and a calcination temperature of 550 °C was the best. The concentration of CB affected its decomposition, but gas hourly space velocity had little effect. H2-TPR indicated strong metal–support interactions and increased dispersion of PdO in the presence of Ce. HRTEM data showed PdO with a characteristic spacing of 0.26 nm in both 0.2% Pd /TiO2 and 0.2% Pd-0.5% Ce/TiO2 catalysts. The average sizes of PdO nanoparticles in the 0.2% Pd/TiO2 and 0.2% Pd-0.5% Ce/TiO2 samples were 5.8 and 4.7 nm, respectively. The PdO particles were also deposited on the support and they were separated from each other in both catalysts.

Preparation of Ni/ZrO2/SiO2 Catalyst and its Application in Hydrogenation of CO2 to Methane

2020 ◽  
Vol 1001 ◽  
pp. 79-83
Author(s):  
Zhen Xing Han ◽  
Si Xi Guo ◽  
Kai Ming Li ◽  
Bing Yao ◽  
Ming Song ◽  
...  
Keyword(s):  
Catalytic Activity ◽  
Low Temperature ◽  
Catalytic Performance ◽  
Experimental Results ◽  
Impregnation Method ◽  
Energy And Environment ◽  
Supported Ni ◽  
Hydrogenation Of Co

The hydrogenation of CO2 to CH4 can realize the utilization of CO2, which has an important implications to both the energy and environment. As a result of the low catalytic activity of the supported Ni/SiO2 catalyst, the ZrO2 is added to improve its catalytic performance by the impregnation method. The experimental results show that ZrO2 is an effective promoter to enhance the low-temperature catalytic activity of Ni/SiO2 catalyst.

Catalytic Properties of Ni/CNTs and Ca-Promoted Ni/CNTs for Methanation Reaction of Carbon Dioxide

2014 ◽  
Vol 924 ◽  
pp. 217-226 ◽  
Author(s):  
Xiang Feng Hu ◽  
Wen Yang ◽  
Ning Wang ◽  
Shi Zhong Luo ◽  
Wei Chu
Keyword(s):  
Carbon Dioxide ◽  
Carbon Nanotubes ◽  
Catalytic Activity ◽  
Catalytic Properties ◽  
Supported Catalyst ◽  
Catalytic Performance ◽  
Impregnation Method ◽  
Methanation Reaction ◽  
Ni Species ◽  
Nickel Species

Nickel/carbon nanotubes (Ni/CNTs), Nickel/alumina (Ni/Al2O3), calcium-promoted Ni/CNTs and calcium-promoted Ni/Al2O3 were synthesized by impregnation method. Methanation of carbon dioxide was used as a probe to evaluate their catalytic performance. The features of these Ni-based catalysts were investigated via XRD, H2-TPR, H2-TPD and the N2 adsorptiondesorption isotherms. H2-TPR showed that nickel species on Ni/CNTs was reduced more easily with respect to that on Ni/Al2O3, and addition of Ca can increase the content of easily reducible Ni species for Ni/CNTs. XRD and H2-TPD indicated that addition of Ca promoted dispersion for CNTs-supported catalyst. These finding ultimately enhanced catalytic activity and stability for Ni/CNTs catalyst modified with Ca.

Sign in / Sign up

Export Citation Format

Share Document