scholarly journals The relationship of structure, thermal and water vapor permeability barrier properties of poly(butylene succinate)/organomodified beidellite clay bionanocomposites prepared by in situ polycondensation

RSC Advances ◽  
2020 ◽  
Vol 10 (61) ◽  
pp. 37314-37326
Author(s):  
Mohamed Ilsouk ◽  
Mustapha Raihane ◽  
Benaissa Rhouta ◽  
Remo Merijs Meri ◽  
Janis Zicans ◽  
...  
Keyword(s):  
Water Vapor ◽  
Water Vapor Permeability ◽  
Barrier Properties ◽  
Vapor Permeability ◽  
Permeability Barrier ◽  
Butylene Succinate ◽  
Biodegradable Nanocomposites ◽  
Relationship Of ◽  
The Relationship

The exploitation of beidellite clay (BDT), used as a nanofiller in the preparation of poly(butylene succinate) (PBS)/organoclay biodegradable nanocomposites, was investigated. Their thermal and water vapor barrier properties were also studied.

scholarly journals Preparation and Characterization of Edible Dialdehyde Carboxymethyl Cellulose Crosslinked Feather Keratin Films for Food Packaging

Polymers ◽  
2020 ◽  
Vol 12 (1) ◽  
pp. 158
Author(s):  
Yao Dou ◽  
Liguang Zhang ◽  
Buning Zhang ◽  
Ming He ◽  
Weimei Shi ◽  
...  
Keyword(s):  
Water Vapor ◽  
Carboxymethyl Cellulose ◽  
Food Packaging ◽  
Light Transmission ◽  
Value Added ◽  
Water Vapor Permeability ◽  
Barrier Properties ◽  
Edible Films ◽  
Vapor Permeability ◽  
Feather Keratin

The development of edible films based on the natural biopolymer feather keratin (FK) from poultry feathers is of great interest to food packaging. Edible dialdehyde carboxymethyl cellulose (DCMC) crosslinked FK films plasticized with glycerol were prepared by a casting method. The effect of DCMC crosslinking on the microstructure, light transmission, aggregate structure, tensile properties, water resistance and water vapor barrier were investigated. The results indicated the formation of both covalent and hydrogen bonding between FK and DCMC to form amorphous FK/DCMC films with good UV-barrier properties and transmittance. However, with increasing DCMC content, a decrease in tensile strength of the FK films indicated that plasticization, induced by hydrophilic properties of the DCMC, partly offset the crosslinking effect. Reduction in the moisture content, solubility and water vapor permeability indicated that DCMC crosslinking slightly reduced the moisture sensitivity of the FK films. Thus, DCMC crosslinking increased the potential viability of the FK films for food packaging applications, offering a value-added product.

scholarly journals Effect of chitosan addition in starch and poly(lactic acid) sheets produced by extrusion

2015 ◽  
Vol 6 (1) ◽  
pp. 80
Author(s):  
Matheus Luz Alberti ◽  
Sílvio José De Souza ◽  
Heliberto Gonçalves ◽  
Fabio Yamashita ◽  
Marianne Ayumi Shirai
Keyword(s):  
Lactic Acid ◽  
Water Vapor ◽  
Food Packaging ◽  
Water Vapor Permeability ◽  
Barrier Properties ◽  
Extrusion Process ◽  
Pilot Scale ◽  
Poly Lactic Acid ◽  
Vapor Permeability ◽  
Water Vapor Barrier

<p>The use of blends containing biodegradable polymers like starch and poly (lactic acid) (PLA) has gained considerable attention, especially for the food packaging production. Current research has also highlighted the use of chitosan because their antimicrobial activity, biodegradability and applicability in the production of active biodegradable food packaging. The objective of this work was to produce cassava starch and PLA sheets incorporated with chitosan by flat extrusion process (calendering-extrusion), and evaluate the mechanical, water vapor barrier and microstructural properties. In order to simplify the obtainment of the material reducing processing steps, all components of the blend were homogenized in one step extrusion The incorporation of chitosan in the starch/PLA sheets decreased significantly the tensile strength, Young's modulus, elongation at break and density. In addition, the scanning electron microscopy images showed the formation of non-homogeneous mixtures with the presence of pores between the blend compounds, and this fact affected the water vapor barrier properties increasing water vapor permeability, solubility and diffusion coefficients. It was possible to conclude that although the incorporation of chitosan to the starch/PLA sheets has not contributed to obtain materials with suitable properties, it was able to produce them by calendering-extrusion process in pilot scale. Studies about chitosan incorporation in starch and PLA sheets still needed.</p><p>&nbsp;</p><p>DOI: 10.14685/rebrapa.v6i1.208</p><p>&nbsp;</p>

scholarly journals Physical Properties of Starch/Powdered Activated Carbon Composite Films

Polymers ◽  
2021 ◽  
Vol 13 (24) ◽  
pp. 4406
Author(s):  
Anita Kwaśniewska ◽  
Michał Świetlicki ◽  
Adam Prószyński ◽  
Grzegorz Gładyszewski
Keyword(s):  
Mechanical Properties ◽  
Activated Carbon ◽  
Water Vapor ◽  
Water Solubility ◽  
Composite Films ◽  
Water Vapor Permeability ◽  
Barrier Properties ◽  
Carbon Composite ◽  
Powdered Activated Carbon ◽  
Vapor Permeability

In the present study, starch/powdered activated carbon composite films were prepared by incorporating various amounts of powdered activated carbon (PAC)—1–5, 10, and 15 %—into a starch matrix, using the solvent casting method. The effect of PAC addition on the biopolymer film was investigated. The mechanical properties were examined by ultra-nanoindentation, nanoscratch, and micro-tensile tests. Since the mechanical properties of biopolymer films are correlated with their structure, the effect of PAC addition was tested using X-ray diffraction. The surface parameters morphology and wettability were analyzed by atomic force microscopy (AFM) and contact angle measurements. The barrier properties were examined by determining water vapor permeability and the water solubility index. The obtained results did not show a monotonic dependence of the mechanical parameters on PAC content, with the exception of the maximum strain, which decreased as the amount of the additive increased. The visible effect of PAC addition was manifested in changes in the adhesive force value and in water vapor permeability (WVP). The barrier properties decreased with the increase of the filler content.

Research on Preparation and Properties of Edible Composite Protein Films

2011 ◽  
Vol 87 ◽  
pp. 213-222 ◽  
Author(s):  
Gui Yun Chen ◽  
Qiao Lei
Keyword(s):  
Mechanical Properties ◽  
Water Vapor ◽  
Water Solubility ◽  
Water Vapor Permeability ◽  
Sodium Caseinate ◽  
Barrier Properties ◽  
Edible Films ◽  
Protein Isolate ◽  
Vapor Permeability ◽  
Protein Films

Edible films based on whey protein isolate and sodium caseinate were prepared by uniform design method. Glycerol has been incorporated into the edible films as a plasticizer. For all types of films, the influences of components and forming temperature on film properties, such as mechanical properties, water solubility, optical properties, gas and water vapor permeability were investigated. The results suggested that glycerol was the most important factor influencing all the properties of edible composite protein films. However, both increases of sodium caseinate concentration and glycerol content contributed to decrease the barrier properties of gas and water vapor. Among the films studied, group D (prepared with 5% whey protein isolate, 2% sodium caseinate, 50% glycerol at the temperature of 50 °C) showed moderate mechanical properties, optical properties, water solubility and maximum barrier properties of gas and water vapor, with tensile strength=5.85MPa, elongation=101.20%, transparency=91.4%, gas permeability rate=49.92cm3m-2d-10.1MPa-1and water vapor permeability of 0.128×10-11g m-1s-1Pa-1, 0.260×10-11g m-1s-1Pa-1, 0.513×10-11g m-1s-1Pa-1, 1.252×10-11g m-1s-1Pa-1at the RH gradient of 10-40%, 10-50%, 10-60%, 10-70%, respectively.

scholarly journals Novel LDPE/Chitosan Rosemary and Melissa Extract Nanostructured Active Packaging Films

Nanomaterials ◽  
2019 ◽  
Vol 9 (8) ◽  
pp. 1105 ◽  
Author(s):  
Giannakas ◽  
Salmas ◽  
Leontiou ◽  
Tsimogiannis ◽  
Oreopoulou ◽  
...  
Keyword(s):  
Water Vapor ◽  
Essential Oil ◽  
Food Packaging ◽  
Antioxidant Properties ◽  
Water Vapor Permeability ◽  
Global Market ◽  
Active Packaging ◽  
Vapor Permeability ◽  
Permeability Barrier ◽  
Instrumental Methods

The increased global market trend for food packaging is imposing new improved methods for the extension of shelf-life and quality of food products. Active packaging, which is based on the incorporation of additives into packaging materials, is becoming significant for this purpose. In this work, nanostructured low-density polyethylene (LDPE) was combined with chitosan (CS) to aim for a food packaging development with an increased oxygen permeability barrier and higher antimicrobial activity. Furthermore, essential oil extracts as rosemary (RO) and Melissa (MO) were added to this packaging matrix in order to improve its antioxidant properties and vanish food odor problems. The novel nanostructured active packaging film was tested using laboratory instrumental methods, such as thermogravimetry (TG), Fourier-transform infrared (FTIR) spectrometry, the X-ray diffraction (XRD) method, a dilatometer for tensile properties (DMA), and an oxygen permeation analyzer (OPA). Moreover, laboratorian tests according to ASTM standards were carried out for the estimation of water sorption, water vapor permeability, overall migration, and, finally, the antioxidant properties of such films. The experimental results have indicated that the final material exhibits advanced properties. More specifically, chitosan addition was observed to lead to an enhanced oxygen and water-vapor permeability barrier while the extracted essential oil addition led to enhanced tensile strength and antioxidant properties.

Preparation of Porous Cellulose Packaging Films in Alcohol Coagulation

2012 ◽  
Vol 262 ◽  
pp. 557-560
Author(s):  
Shan Shan Gao ◽  
Jian Qing Wang ◽  
Xiu Feng Ma ◽  
Lin Zhao
Keyword(s):  
Mechanical Properties ◽  
Water Vapor ◽  
Fruits And Vegetables ◽  
Water Vapor Permeability ◽  
Barrier Properties ◽  
Vapor Permeability ◽  
Porous Films ◽  
Packaging Films ◽  
Different Types ◽  
Current Concerns

The barrier properties of the cellulose packaging films are current concerns for the fields of fruits and vegetables fresh-keeping packaging. One such porous films commonly used the pore formers as hole-forming materials whereas the compatibility and dispersity were not better with the cellulose solutions. In this study, the porous cellulose packaging films were prepared with natural broad-leaved pulp and LiCl/DMAc with different types of coagulation baths. The effects of methanol, ethanol, isopropanol, LiCl/DMAc and deionized water coagulation baths on the physical structures, oxygen and water vapor permeabilities and mechanical properties of the films were measured. Based on the scanning electron microscpy (SEM) observation, the cross section was loose when used the alcohol coagulations, especially the films with ethanol coagulation showed dactylopores. It was also found that the oxygen permeability had obviously improving with the effect of ethanol, which compared with water vapor permeability of the films. The porous cellulose packaging films had better mechanical properties and up to 12.7MPa which would satisfy the usage in packaging.

scholarly journals Production of starch/poly(lactic acid) sheets containing citric acid and tributyl citrate

2016 ◽  
Vol 7 (2) ◽  
pp. 173 ◽  
Author(s):  
Silvio José Souza ◽  
Nicolli Grecco Marchiore ◽  
Marcella Vitória Galindo ◽  
Fabio Yamashita ◽  
Marianne Ayumi Shirai
Keyword(s):  
Lactic Acid ◽  
Water Vapor ◽  
Citric Acid ◽  
Water Vapor Permeability ◽  
Barrier Properties ◽  
Thermoplastic Starch ◽  
Poly Lactic Acid ◽  
Vapor Permeability ◽  
Water Vapor Barrier

In this work thermoplastic starch and poly(lactic acid) (PLA) sheets added of tributyl citrate (TBC) and citric acid was produced by flat extrusion (calendaring-extrusion). The incorporation of TBC and citric acid reduced the rigidity, increased the water vapor permeability (WVP) and density of the sheets. This occurred probably because these compounds acted as plasticizer for PLA and starch. Thus, it was possible to conclude that it was possible to produce starch and PLA blended sheets by extrusion, but studies are still required to find the appropriate concentration of TBC and citric acid that does not significantly impair the water vapor barrier properties.

Hybrid films from plant and bacterial nanocellulose: mechanical and barrier properties

2022 ◽  
Vol 0 (0) ◽  
Author(s):  
Thiago Moreira Cruz ◽  
Adriano Reis Prazeres Mascarenhas ◽  
Mário Vanoli Scatolino ◽  
Douglas Lamounier Faria ◽  
Lays Camila Matos ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Water Vapor ◽  
Mechanical Performance ◽  
Cellulose Nanofibrils ◽  
Water Vapor Permeability ◽  
Barrier Properties ◽  
Contact Angles ◽  
Vapor Permeability ◽  
Hybrid Films

Abstract The accumulation of petroleum polymers compromises biodiversity and causes environmental problems. Nanocellulose enhances biodegradability and can improve the physical-mechanical performance of materials. The objective was to produce and characterize hybrid films composed of bacterial cellulose (BC) and plant nanocellulose from Eucalyptus (Euc) or Pinus (Pin). Films were produced by the casting method using filmogenic suspensions with different cellulose nanofibrils (CNFs) proportions from both the sources (0, 25, 50, 75 and 100 %). CNFs suspensions were characterized by transmission electron microscopy. The morphology of the films was analyzed using scanning electron microscopy. In addition, the transparency, contact angle, wettability, oil and water vapor barrier and mechanical properties were also evaluated. The contact angles were smaller for films with BC and the wettability was greater when comparing BC with plant CNFs (0.10 °  s − 1 {\text{s}^{-1}} for 75 % Euc/25 % BC and 0.20 °  s − 1 {\text{s}^{-1}} for 25 % Euc/75 % BC). The water vapor permeability (WVP) of the 100 % BC films and the 25 % Euc/75 % BC composition were the highest among the studied compositions. Tensile strength, Young’s modulus and puncture strength decreased considerably with the addition of BC in the films. More studies regarding pre-treatments to purify BC are needed to improve the mechanical properties of the films.

Effect of the talc filler on structural, water vapor barrier and mechanical properties of poly(lactic acid) composites

2016 ◽  
Vol 36 (2) ◽  
pp. 181-188 ◽  
Author(s):  
Aleksandra Buzarovska ◽  
Gordana Bogoeva-Gaceva ◽  
Radek Fajgar
Keyword(s):  
Mechanical Properties ◽  
Lactic Acid ◽  
Water Vapor ◽  
Composite Films ◽  
Water Vapor Permeability ◽  
Barrier Properties ◽  
Poly Lactic Acid ◽  
Vapor Permeability ◽  
Scanning Calorimetry ◽  
Structural Water

Abstract Poly(lactic acid) (PLA) based composite films with different content of talc (5–15 wt%) were prepared by the solvent casting method. The effect of talc on morphological, structural, thermal, barrier and mechanical properties of neat PLA was investigated. The PLA/talc composites revealed a polymorphic crystalline structure, as demonstrated by X-ray diffraction (XRD) study and differential scanning calorimetry (DSC) analysis. The PLA/talc composites also exhibited significantly improved barrier properties (up to 55% compared to neat PLA), as shown by water vapor permeability (WVP) tests. The puncture measurements showed improved mechanical properties at lower content of talc (up to 5 wt%), and increased brittleness of the PLA/talc composite films at higher talc concentrations.

scholarly journals In Situ Curing of a Polymer Film for Light-Proof Coring of Deep Rocks with Preservation of Rock Quality and Moisture

2020 ◽  
Vol 2020 ◽  
pp. 1-11
Author(s):  
Zhiyu Zhao ◽  
Heping Xie ◽  
Tao Liu ◽  
Yifan Wu
Keyword(s):  
Water Vapor ◽  
Polymer Film ◽  
Water Vapor Permeability ◽  
Light Transmittance ◽  
Vapor Permeability ◽  
Crosslinking Reaction ◽  
Deep Foundation ◽  
The Core ◽  
Rock Specimens

Deep in situ rock mechanic is of great significance for deep foundation research and engineering application. In order to explore the deep in situ mechanical law, it is necessary to maintain the in situ environment, which means to achieve fidelity coring. However, at present, there is a lack of method of deep rocks with quality-preserving, moisture-preserving, and light-proof to obtain deep rock specimens, making it difficult to obtain in situ scientific information of the core. In this study, we developed a novel in situ quality-preserving coring method of deep rocks based on an in situ film-forming process. In this method, a solution was covered on the core, and then a sealing polymer film was formed through crosslinking reaction. Organic montmorillonite and carbon black functional fillers were incorporated to further reduce the O2 and water vapor permeability and light transmittance of the polymer sealing film. The sealing film was characterized by Fourier transform infrared spectroscopy, X-ray diffraction, and scanning electron microscopy. Compared to the neat silicone rubber film, the O2 and water vapor permeability and light transmittance of the sealing film were reduced by 81.2%, 84.4%, and 100%, respectively. In addition, the mechanical and thermal stability of the sealing film was excellent; it showed an elongation at a break of 98.0% and a tensile strength of 0.857 MPa. Moreover, a simulator was developed and the sealing film showed an excellent quality-preserving ability on the rock specimens. The significant improvement demonstrated that the method developed in this research may open up new opportunities for the development of the in situ quality-preserving coring method of deep rocks and construction of deep in situ rock mechanics.

Sign in / Sign up

Export Citation Format

Share Document