scholarly journals Sub-monolayer Au9 cluster formation via pulsed nozzle cluster deposition

2020 ◽  
Vol 2 (9) ◽  
pp. 4051-4061
Author(s):  
Jesse Daughtry ◽  
Gunther G. Andersson ◽  
Gregory F. Metha ◽  
Siriluck Tesana ◽  
Tomonobu Nakayama
Keyword(s):  
Cluster Formation ◽  
High Vacuum ◽  
Cluster Deposition ◽  
Pulsed Nozzle

Submonolayer coverages of chemically synthesised triphenylphosphine-protected Au9 clusters on mica and TiO2 substrates were achieved through the development of a Pulsed Nozzle Cluster Deposition (PNCD) technique under high vacuum conditions.

Toward Growing III-V Clusters with Metalorganic Precursors

1997 ◽  
Vol 468 ◽  
Author(s):  
A. Demchuk ◽  
J. Porter ◽  
B. Koplitz
Keyword(s):  
Excimer Laser ◽  
Vacuum Chamber ◽  
High Vacuum ◽  
Pulsed Laser ◽  
Quadrupole Mass ◽  
Reaction Region ◽  
High Vacuum Chamber ◽  
Arf Excimer Laser ◽  
193 Nm ◽  
Pulsed Nozzle

ABSTRACTThe present work reports on the formation of GaN-containing clusters from metalorganic precursors by combining pulsed laser photolysis and pulsed nozzle methods. Ammonia (NH3) and triethylgallium (C2H5)3Ga (TEG) or trimethylgallium (CH3)3Ga (TMG) with He, Ar, or N2 as the carrier gas are introduced into a high vacuum chamber via a specialized dual pulsed nozzle source. The light from an ArF excimer laser (193 nm, 23 ns FWHM) is focused into the mixing and reaction region of the nozzle source, and the products are then mass analyzed with a quadrupole mass spectrometer. Efficient laser-assisted growth of (GaN)x-containing clusters is shown with this technique.

Low Temperature Laser-Assisted Gas Phase Reactivity of TMGa with NH3 and Oxygen-Containing Compounds (H2O, CH3OH, O(CH3)2) in Constrained Pulsed Expansions

2002 ◽  
Vol 743 ◽  
Author(s):  
Alexander Demchuk ◽  
Michael Lynch ◽  
Steven Simpson ◽  
Brent Koplitz
Keyword(s):  
Gas Phase ◽  
Vacuum Chamber ◽  
Cluster Formation ◽  
High Vacuum ◽  
Oxygen Species ◽  
Quadrupole Mass ◽  
High Vacuum Chamber ◽  
Arf Excimer Laser ◽  
Gas Nozzle ◽  
193 Nm

ABSTRACTThe present work reports on the study of III-V gas phase reactivity in constrained gas pulse expansions of trimethylgallium (TMGa) and oxygen derivative compounds (H2O, CH3OH, O(CH3)2) with and without ammonia. The precursors are introduced separately into a high vacuum chamber via a multipulsed gas nozzle assembly. The gas mixtures are then exposed to a UV pulse from an ArF excimer laser (λ=193 nm) and the products are mass analyzed with a quadrupole mass spectrometer. The efficient laser-assisted growth of Ga-O-containing clusters in the form of [(CH3)2GaOR] x, where R is H or CH3, has been revealed. Different behavior can be seen in the reaction of TMG and the oxygen species depending on the presence of H atoms bonded to the oxygen. Significant influence of NH3 on cluster formation and oxygen incorporation is demonstrated.

Replication of Wet Objects and Cells

1974 ◽  
Vol 32 ◽  
pp. 102-103
Author(s):  
S. Basu ◽  
D. F. Parsons
Keyword(s):  
Water Vapor Pressure ◽  
High Vacuum ◽  
Polystyrene Latex ◽  
Vacuum System ◽  
Saturated Water Vapor ◽  
Replication Method ◽  
New Methods ◽  
Saturated Water ◽  
Water Vapors ◽  
Intermediate Chamber

We are approaching the invasiveness of cancer cells from the studies of their wet surface morphology which should distinguish them from their normal counterparts. In this report attempts have been made to provide physical basis and background work to a wet replication method with a differentially pumped hydration chamber (Fig. 1) (1,2), to apply this knowledge for obtaining replica of some specimens of known features (e.g. polystyrene latex) and finally to realize more specific problems and to improvize new methods and instrumentation for their rectification. In principle, the evaporant molecules penetrate through a pair of apertures (250, 350μ), through water vapors and is, then, deposited on the specimen. An intermediate chamber between the apertures is pumped independently of the high vacuum system. The size of the apertures is sufficiently small so that full saturated water vapor pressure is maintained near the specimen.

Thin Pyrolytic Graphite Films for Electron Microscope Substrates

1971 ◽  
Vol 29 ◽  
pp. 226-227 ◽  
Author(s):  
George H. N. Riddle ◽  
Benjamin M. Siegel
Keyword(s):  
Vacuum Chamber ◽  
Pyrolytic Graphite ◽  
High Vacuum ◽  
Dark Field ◽  
Ultra High Vacuum ◽  
Graphite Substrate ◽  
Nickel Substrate ◽  
Routine Procedure ◽  
Field Electron Microscopy ◽  
Dark Field Electron

A routine procedure for growing very thin graphite substrate films has been developed. The films are grown pyrolytically in an ultra-high vacuum chamber by exposing (111) epitaxial nickel films to carbon monoxide gas. The nickel serves as a catalyst for the disproportionation of CO through the reaction 2C0 → C + CO2. The nickel catalyst is prepared by evaporation onto artificial mica at 400°C and annealing for 1/2 hour at 600°C in vacuum. Exposure of the annealed nickel to 1 torr CO for 3 hours at 500°C results in the growth of very thin continuous graphite films. The graphite is stripped from its nickel substrate in acid and mounted on holey formvar support films for use as specimen substrates.The graphite films, self-supporting over formvar holes up to five microns in diameter, have been studied by bright and dark field electron microscopy, by electron diffraction, and have been shadowed to reveal their topography and thickness. The films consist of individual crystallites typically a micron across with their basal planes parallel to the surface but oriented in different, apparently random directions about the normal to the basal plane.

A High Voltage Electron Microscopy Study of Sub-Oxide Formation in Vanadium

1971 ◽  
Vol 29 ◽  
pp. 212-213
Author(s):  
R. H. Geiss ◽  
R. L. Ladd ◽  
K. R. Lawless
Keyword(s):  
High Vacuum ◽  
Microscopy Study ◽  
Electron Microscopy Study ◽  
Ultra High Vacuum ◽  
Pure Oxygen ◽  
Pressure Oxidation ◽  
High Voltage Electron Microscopy ◽  
Oxidation Study ◽  
Voltage Electron ◽  
Good Agreement

Detailed electron microscope and diffraction studies of the sub-oxides of vanadium have been reported by Cambini and co-workers, and an oxidation study, possibly complicated by carbon and/or nitrogen, has been published by Edington and Smallman. The results reported by these different authors are not in good agreement. For this study, high purity polycrystalline vanadium samples were electrochemically thinned in a dual jet polisher using a solution of 20% H2SO4, 80% CH3OH, and then oxidized in an ion-pumped ultra-high vacuum reactor system using spectroscopically pure oxygen. Samples were oxidized at 350°C and 100μ oxygen pressure for periods of 30,60,90 and 160 minutes. Since our primary interest is in the mechanism of the low pressure oxidation process, the oxidized samples were cooled rapidly and not homogenized. The specimens were then examined in the HVEM at voltages up to 500 kV, the higher voltages being necessary to examine thick sections for which the oxidation behavior was more characteristic of the bulk.

Demonstration of the Use of Tape-Recorded Information from a High Vacuum Electron Microscope

1969 ◽  
Vol 27 ◽  
pp. 218-219
Author(s):  
Richard E. Hartman ◽  
Roberta S. Hartman ◽  
Peter L. Ramos
Keyword(s):  
Information Retrieval ◽  
Electron Microscope ◽  
Magnetic Tape ◽  
High Vacuum ◽  
Data Retrieval ◽  
Electronic Information ◽  
Electronic Data ◽  
Subsequent Processing ◽  
Continuous Record

We have long felt that some form of electronic information retrieval would be more desirable than conventional photographic methods in a high vacuum electron microscope for various reasons. The most obvious of these is the fact that with electronic data retrieval the major source of gas load is removed from the instrument. An equally important reason is that if any subsequent analysis of the data is to be made, a continuous record on magnetic tape gives a much larger quantity of data and gives it in a form far more satisfactory for subsequent processing.

The High Resolution Scanning Transmission Electron Microscope

1974 ◽  
Vol 32 ◽  
pp. 316-317
Author(s):  
A. V. Crewe
Keyword(s):  
Electron Microscope ◽  
High Resolution ◽  
High Vacuum ◽  
Scanning Transmission Electron Microscope ◽  
Ultra High Vacuum ◽  
Resolving Power ◽  
Imaging Characteristics ◽  
Transmission Electron ◽  
Scanning Transmission ◽  
The Moment

The high resolution STEM is now a fact of life. I think that we have, in the last few years, demonstrated that this instrument is capable of the same resolving power as a CEM but is sufficiently different in its imaging characteristics to offer some real advantages.It seems possible to prove in a quite general way that only a field emission source can give adequate intensity for the highest resolution^ and at the moment this means operating at ultra high vacuum levels. Our experience, however, is that neither the source nor the vacuum are difficult to manage and indeed are simpler than many other systems and substantially trouble-free.

Radiation-Induced Precipitation at Thin Foil Surfaces in Ni-Be Alloys

1982 ◽  
Vol 40 ◽  
pp. 598-599
Author(s):  
T. Mukai ◽  
T. E. Mitchell
Keyword(s):  
Electron Microscopy ◽  
High Voltage ◽  
Electron Irradiation ◽  
High Vacuum ◽  
Thin Foil ◽  
Homogeneous Precipitation ◽  
High Voltage Electron Microscopy ◽  
Voltage Electron ◽  
High Voltage Electron ◽  
Radiation Induced

Radiation-induced homogeneous precipitation in Ni-Be alloys was recently observed by high voltage electron microscopy. A coupling of interstitial flux with solute Be atoms is responsible for the precipitation. The present investigation further shows that precipitation is also induced at thin foil surfaces by electron irradiation under a high vacuum.

Structure of Palladium Single-Crystal Films Prepared by Flash Evaporation onto (001) NaCl Substrates

1970 ◽  
Vol 28 ◽  
pp. 456-457
Author(s):  
L. E. Murr ◽  
G. Wong
Keyword(s):  
Single Crystal ◽  
High Vacuum ◽  
Ultra High Vacuum ◽  
High Rate ◽  
Flash Evaporation ◽  
Optimum Load ◽  
Single Crystal Films ◽  
Crystal Films ◽  
A Current

Palladium single-crystal films have been prepared by Matthews in ultra-high vacuum by evaporation onto (001) NaCl substrates cleaved in-situ, and maintained at ∼ 350° C. Murr has also produced large-grained and single-crystal Pd films by high-rate evaporation onto (001) NaCl air-cleaved substrates at 350°C. In the present work, very large (∼ 3cm2), continuous single-crystal films of Pd have been prepared by flash evaporation onto air-cleaved (001) NaCl substrates at temperatures at or below 250°C. Evaporation rates estimated to be ≧ 2000 Å/sec, were obtained by effectively short-circuiting 1 mil tungsten evaporation boats in a self-regulating system which maintained an optimum load current of approximately 90 amperes; corresponding to a current density through the boat of ∼ 4 × 104 amperes/cm2.

Vacuum System to Minimize the Specimen Contamination of High-Performance EM

1977 ◽  
Vol 35 ◽  
pp. 68-69
Author(s):  
N. Yoshimura ◽  
K. Shirota ◽  
T. Etoh
Keyword(s):  
Electron Microscope ◽  
High Speed ◽  
High Performance ◽  
High Vacuum ◽  
Vacuum System ◽  
Pump System ◽  
Pumping System ◽  
Diffusion Pump ◽  
Almost All ◽  
Cascade Type

One of the most important requirements for a high-performance EM, especially an analytical EM using a fine beam probe, is to prevent specimen contamination by providing a clean high vacuum in the vicinity of the specimen. However, in almost all commercial EMs, the pressure in the vicinity of the specimen under observation is usually more than ten times higher than the pressure measured at the punping line. The EM column inevitably requires the use of greased Viton O-rings for fine movement, and specimens and films need to be exchanged frequently and several attachments may also be exchanged. For these reasons, a high speed pumping system, as well as a clean vacuum system, is now required. A newly developed electron microscope, the JEM-100CX features clean high vacuum in the vicinity of the specimen, realized by the use of a CASCADE type diffusion pump system which has been essentially improved over its predeces- sorD employed on the JEM-100C.

Sign in / Sign up

Export Citation Format

Share Document