A superamphiphobic surface with a hydrogen peroxide-triggered switch to antithetic fluid repellence in a liquid–liquid–air three-phase fluid system

2020 ◽  
Vol 56 (31) ◽  
pp. 4312-4315
Author(s):  
Yihan Sun ◽  
Jinxia Huang ◽  
Zhiguang Guo

Fluid repellence in one arbitrary phase for repelling the other two phases in a generalized liquid–liquid–air system was achieved on a hydrogen peroxide-treated surface.

2018 ◽  
Vol 8 (6) ◽  
pp. 3585-3591 ◽  
Author(s):  
O. M. Al-Barbarawi

This study aims to investigate, analyze, discuss and illustrate an effective and reliable fast braking system used in a three-phase induction motor by combining two or more different conventional braking methods such as dynamic-plugging and electromagnetic-plugging. The plugging process is implemented by disconnecting one of the stator phases and connecting it with an electromagnetic brake while interchanging the other two phases. The dynamic process is executed by inserting high resistance in the rotor circuit of the motor. The performance of the torque-speed characteristics of the induction motor will be studied and analyzed through the dynamic process. Mathematical models have been developed and simulated. Results show that the braking process time is greatly reduced.


TAPPI Journal ◽  
2018 ◽  
Vol 17 (11) ◽  
pp. 601-607
Author(s):  
Alan Rudie ◽  
Peter Hart

The use of 50% concentration and 10% concentration hydrogen peroxide were evaluated for chemical and mechanical pulp bleach plants at storage and at point of use. Several dangerous occurrences have been documented when the supply of 50% peroxide going into the pulping process was not stopped during a process failure. Startup conditions and leaking block valves during maintenance outages have also contributed to explosions. Although hazardous events have occurred, 50% peroxide can be stored safely with proper precautions and engineering controls. For point of use in a chemical bleach plant, it is recommended to dilute the peroxide to 10% prior to application, because risk does not outweigh the benefit. For point of use in a mechanical bleach plant, it is recommended to use 50% peroxide going into a bleach liquor mixing system that includes the other chemicals used to maintain the brightening reaction rate. When 50% peroxide is used, it is critical that proper engineering controls are used to mitigate any risks.


2020 ◽  
Vol 17 (2) ◽  
pp. 172
Author(s):  
HARMAN AGUSAPUTRA ◽  
MARIA SUGENG ◽  
AYLY SOEKAMTO ◽  
ATIK WULANDARI

<p><strong>Abstract</strong></p><p><strong>Background:</strong> Hydrogen peroxide (H<sub>2</sub>O<sub>2</sub>) as antiseptic has been used frequently to clean woundsin in hospitals and clinics. Hydrogen peroxide has the effectof strong oxidative that can kill pathogens. It can clean up debris and necrotic tissuesin wounds. Hydrogen peroxidealso has hemostatic effect that can help to stop bleeding. Besides antiseptic effects, hydrogen peroxide i s suspected of having negative effect in wound healing. Hydrogen peroxide presumably could cause delayed wound healing by exudate formation and delayed epithelial growth.</p><p><strong>Method</strong>: This study was conducted in the laboratory using 48 white mice that were divided into 2 groups. All the mice were purposely wounded. Afterwards in one group the wounds were clean up using hydrogen peroxide, while in the other group without hydrogen peroxide as control. The wounds of both groups were observed on day 1, day 3 and day 7. On day 1 and day 3, both groups did not show significant difference.</p><p><strong>R</strong><strong>esult</strong> : on day 7 showed that the wound healing in hydrogen peroxide group were delayed. Fifty percent of them had the formation of exudate and 62.5% of them showed delayed epithelial growth.</p><p><strong>Conclusion </strong>: This study could show hydrogen peroxide as wound antiseptic has delayed wound healing effect.</p><p><strong>Keyword</strong>: hydrogen peroxide, wound healing</p>


2020 ◽  
Vol 38 (8A) ◽  
pp. 1187-1199
Author(s):  
Qaed M. Ali ◽  
Mohammed M. Ezzalden

BLDC motors are characterized by electronic commutation, which is performed by using an electric three-phase inverter. The direct control system of the BLDC motor consists of double loops; including the inner-loop for current regulating and outer-loop for speed control. The operation of the current controller requires feedback of motor currents; the conventional current controller uses two current sensors on the ac side of the inverter to measure the currents of two phases, while the third current would be accordingly calculated. These two sensors should have the same characteristics, to achieve balanced current measurements. It should be noted that the sensitivity of these sensors changes with time. In the case of one sensor fails, both of them must be replaced. To overcome this problem, it is preferable to use one sensor instead of two. The proposed control system is based on a deadbeat predictive controller, which is used to regulate the DC current of the BLDC motor. Such a controller can be considered as digital controller mode, which has fast response, high precision and can be easily implemented with microprocessor. The proposed control system has been simulated using Matlab software, and the system is tested at a different operating condition such as low speed and high speed.


2013 ◽  
Vol 14 (4) ◽  
pp. 393-398

The occurrence of trihalomethanes (THMs) was studied in the drinking water samples from urban water supply network of Karachi city that served more than 18 million people. Drinking water samples were collected from 58 locations in summer (May-August) and winter (November-February) seasons. The major constituent of THMs detected was chloroform in winter (92.34%) and summer (93.07%), while the other THMs determined at lower concentrations. Summer and winter concentrations of total THMs at places exceed the levels regulated by UEPA (80 μg l-1) and WHO (100 μg l-1). GIS linked temporal variability in two seasons showed significantly higher median concentration (2.5%-23.06%) of THMs compared to winter.


2018 ◽  
Vol 69 (8) ◽  
pp. 2081-2088 ◽  
Author(s):  
Alin Alexandru Odor ◽  
Edwin Sever Bechir ◽  
Deborah Violant ◽  
Victoria Badea

Moderate and severe periodontitis represents a challenge in the non-surgical periodontal therapy. Due to the lack of evidence regarding the antimicrobial effectiveness of 940 nm diode laser in periodontal treatment, this study aimed to evaluate the antimicrobial effect of hydrogen peroxide (H2O2) photolysis performed with 940 nm diode laser in the treatment of moderate and severe periodontitis. Twenty-five patients with 100 teeth were selected for this pilot study. The test teeth were randomly assigned to one of the four treatment groups: Group 1: scaling and root planning (SRP) (control group); and the following experimental groups: Group 2: H2O2; Group 3: 940 nm diode laser therapy; Group 4: 940 nm diode laser therapy and H2O2. Clinical examinations, like probing depth (PD), clinical attachment level (CAL) and bleeding on probing (BOP) were performed before and after the treatment. The microbiological evaluation, effectuated before and after the treatment, included nine periodontal bacteria species and investigated by means of real-time PCR assay. The clinical and bacterial differences in the tested groups, was assessed between control group and the other three experimental groups, as well as between the experimental groups. The total bacteria load was reduced for all four studied groups. Group 4 (diode laser + H2O2) showed significant bacterial reduction of the major periodontal bacteria like Pg., Tf., Td., Pi., Pm., Fn (p[0.001) than the other 3 groups (p]0.001). Also the periodontal clinical parameters, like PD, CAL and BOP showed a significant reduction after the photolysis of H2O2 with the 940 nm diode laser (p[0.001). Differences between tested groups showed a significant beneficial results in regard to Group 4.It is suggested that the photoactivation of H2O2 with the 940 nm diode laser can be used successfully in adjunctive to the non-surgical periodontal treatment as a bactericidal tool.


1991 ◽  
Vol 56 (4) ◽  
pp. 923-932
Author(s):  
Jana Stejskalová ◽  
Pavel Stopka ◽  
Zdeněk Pavlíček

The ESR spectra of peroxidase systems of methaemoglobin-ascorbic acid-hydrogen peroxide and methaemoglobin-haptoglobin complex-ascorbic acid-hydrogen peroxide have been measured in the acetate buffer of pH 4.5. For the system with methaemoglobin an asymmetrical signal with g ~ 2 has been observed which is interpreted as the perpendicular region of anisotropic spectrum of superoxide radical. On the other hand, for the system with methaemoglobin-haptoglobin complex the observed signal with g ~ 2 is symmetrical and is interpreted as a signal of delocalized electron. After realization of three repeatedly induced peroxidase processes the ESR signal of the perpendicular part of anisotropic spectrum of superoxide radical is distinctly diminished, whereas the signal of delocalized electron remains practically unchanged. An amino acid analysis of methaemoglobin along with results of the ESR measurements make it possible to derive a hypothesis about the role of haptoglobin in increasing of the peroxidase activity of methaemoglobin.


1990 ◽  
Vol 55 (10) ◽  
pp. 2377-2380
Author(s):  
Hamza A. Hussain

Nitroxide free radicals prepared from diethylamine, piperidine and pyrrolidine by oxidation with hydrogen peroxide were studied by ESR spectroscopy. The changes in the 14N splitting constant (aN) caused by the addition of KBr or tetraethylammonium bromide were measured in dependence on the concentration of the ions. For diethylamine nitroxide and piperidine nitroxide, the results are discussed in terms of two equilibria: the one, involving the anion, is associated with a gain or loss of hydrogen bonds to the nitroxide oxygen atom, the other is associated with the formation of solvent shared units involving the cation, which results in changes in the hydrogen bonding strenght. The large increase in the aN value in the case of pyrrolidine nitroxide is explained in terms of an interaction from one side of the positively charged N atom; the increase in aN in the case of diethylamine and piperidine nitroxides is explained in terms of interactions with both sides of the positively charged N atom.


Axioms ◽  
2021 ◽  
Vol 10 (1) ◽  
pp. 17
Author(s):  
Maria Laura Delle Delle Monache ◽  
Karen Chi ◽  
Yong Chen ◽  
Paola Goatin ◽  
Ke Han ◽  
...  

This paper uses empirical traffic data collected from three locations in Europe and the US to reveal a three-phase fundamental diagram with two phases located in the uncongested regime. Model-based clustering, hypothesis testing and regression analyses are applied to the speed–flow–occupancy relationship represented in the three-dimensional space to rigorously validate the three phases and identify their gaps. The finding is consistent across the aforementioned different geographical locations. Accordingly, we propose a three-phase macroscopic traffic flow model and a characterization of solutions to the Riemann problems. This work identifies critical structures in the fundamental diagram that are typically ignored in first- and higher-order models and could significantly impact travel time estimation on highways.


1973 ◽  
Vol 59 (2) ◽  
pp. 231-247 ◽  
Author(s):  
P. E. HARTMANN

SUMMARY Mammary secretion (1·2–2·0 ml) was collected from the milk sinus of each mammary gland (quarter) of two pregnant heifers and eight pregnant cows (dry period 49–229 days), first at weekly intervals from 40 days before parturition, then with increasing frequency as parturition approached. The progressive changes in the concentration of lactose, glucose, casein, non-casein protein and fat in the mammary secretion were determined. Calves were separated from the cows immediately after birth and the yield and composition of milk from individual quarters were determined for 5 days after parturition. Two quarters (milked quarters) of each of a further five cows were milked throughout pregnancy, while the other two quarters (unmilked quarters) of each cow were allowed to involute (dry off) 63– 104 days before parturition. Small samples (5–10 ml) of secretion were collected from the unmilked quarters, first at weekly intervals after drying off and then every second day from 10 to 15 days before parturition. On the days that the unmilked quarters were sampled, corresponding composite milk samples were collected from the milked quarters and the progressive changes in the yield of milk, lactose and fat were determined. The changes in the concentration of lactose and glucose in the mammary secretion, during drying off in late lactation, were determined in an additional five cows. In most cows allowed a usual dry period, and in the unmilked quarters of cows in which two quarters were milked throughout pregnancy, the concentration of lactose gradually increased from about 8 to 12 days before parturition to reach levels of about half those found in normal milk just before parturition. However, in some cows the concentration of lactose was low until 1–2 days before parturition and then increased abruptly, whereas in others the concentration of lactose increased slowly from as early as 32 days before parturition. A further rapid increase in the concentration of lactose in the mammary secretion occurred between 0 and 4 days before parturition in all cows. This latter increase was accompanied by an abrupt increase in the yield of milk, lactose and fat in the milked quarters of the cows in which two quarters were milked throughout pregnancy. These observations suggest that the initiation of lactation in the cow develops in two phases, a limited secretion of milk constituents occurs in late pregnancy and then 0–4 days before parturition copious secretion (lactogenesis) occurs.


Sign in / Sign up

Export Citation Format

Share Document