A bio-inspired cilia array as the dielectric layer for flexible capacitive pressure sensors with high sensitivity and a broad detection range

2019 ◽  
Vol 7 (48) ◽  
pp. 27334-27346 ◽  
Author(s):  
Qian Zhou ◽  
Bing Ji ◽  
Yuzhang Wei ◽  
Bin Hu ◽  
Yibo Gao ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Dielectric Layer ◽  
Pressure Sensors ◽  
High Sensitivity ◽  
Capacitive Sensors ◽  
Detection Range

A cilia array via a magnetic field was proposed as the dielectric layer for flexible capacitive sensors with high sensitivity and a broad detection range.

scholarly journals Wearable Pressure Sensors Based on Carbonized Graphene Coated Waste Paper Aerogel

2021 ◽  
Author(s):  
Ang Li ◽  
Ce Cui ◽  
Weijie Wang ◽  
Yue Zhang ◽  
Jianyu Zhai ◽  
...  
Keyword(s):  
3D Structure ◽  
Pressure Sensors ◽  
High Sensitivity ◽  
Waste Paper ◽  
Low Density ◽  
Detection Range ◽  
Simple Strategy ◽  
Simple Filtration ◽  
Piezoresistive Pressure Sensors ◽  
Main Component

Abstract Graphene is complexed with cellulose fibers to construct 3D aerogels, which is generally considered to be an environmentally friendly and simple strategy to achieve wide sensing, high sensitivity and low detection of wearable piezoresistive pressure sensors. Here, graphene is incorporated into waste paper fibers with cellulose as the main component to prepare graphene coated waste paper aerogel (GWA) using a simple “filtration-oven drying” method under atmospheric pressure. The GWA was further annealed to obtain the carbonized graphene coated waste paper aerogel (C-GWA) to achieve low density and excellent resilience. The result shows that the C-GWA has a rough outer surface due to the 3D structure formed by interpenetrated fibers and the carbon skeleton with wrinkles. The sensor based on GCA shows low density (25mg/cm3), a wide detection range of 0-132 kPa, an ultra-low detection limit of 2.5 Pa (a green bean, ≈ 53.4 mg), and a high sensitivity of 31.6 kPa− 1. In addition, the sensor based on C-GWA with the excellent performance can be used to detect human motions including the pulse of the human body, cheek blowing and bending of human joints. The result indicates that the sensor based on C-GWA shows great potential for wearable electronic products.

scholarly journals Experimental Study on the Localization of Moving Object by Total Geomagnetic Field

2017 ◽  
Vol 2017 ◽  
pp. 1-7
Author(s):  
Chong Kang ◽  
Liming Fan ◽  
Quan Zheng ◽  
Xiyuan Kang ◽  
Jian Zhou ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Geomagnetic Field ◽  
High Sensitivity ◽  
Magnetic Anomalies ◽  
Target Localization ◽  
Total Field ◽  
Detection Range ◽  
Vector Sensors ◽  
Field Localization ◽  
Low Sensitivity

In the method of target localization based on magnetic anomalies, the scheme of vector field localization and experimental research are significant. Because more information of magnetic field can be measured by vector sensors, the position of the target can be directly calculated by the equations. However, the vector magnetic anomaly generated by the target is difficult to measure. And the detection range is small due to the low sensitivity of vector sensors. A method for target localization based on the total geomagnetic field is proposed. Its advantages are that the measurement of total magnetic field is not affected by the orientation of the total field sensors and the detection range is large due to their high sensitivity. In this paper, we focus on the localization using the array with the total field magnetometers. And we design an array structure with the total field magnetometers. Then, we obtain the higher order nonlinear equations for the target localization based on this array. The numerical method is used to solve the equations. Meanwhile, we present a method for eliminating the effect of geomagnetic field variations and uneven spatial distribution. In suburban roads, localization experiments were carried out. And the results showed that the relative error of target localization is less than 5% by using the proposed method.

scholarly journals Study on the forming and sensing properties of laser-sintered TPU/CNT composites for plantar pressure sensors

2021 ◽  
Author(s):  
Yu Zhuang ◽  
Yanling Guo ◽  
Jian Li ◽  
Yueqiang Yu ◽  
Kaiyi Jiang ◽  
...  
Keyword(s):  
High Performance ◽  
Thermoplastic Polyurethane ◽  
Selective Laser Sintering ◽  
Conductive Polymer ◽  
Three Dimensional ◽  
Pressure Sensors ◽  
High Sensitivity ◽  
Sensing Element ◽  
Resistance Response ◽  
Detection Range

AbstractConductive polymer composites (CPCs) combining with specific microstructures (micropores, microcracks, etc.) can exhibit unique resistance response changes, which can be widely regarded as an effective way to improve sensing performance. This study takes advantage of the characteristics of the formation of tiny pores between crystal grains during selective laser sintering (SLS) processing to introduce a microporous structure into the thermoplastic polyurethane (TPU)/carbon nanotube (CNT) sensing element to prepare a three-dimensional porous conductive structure. The effect of the SLS process on sensing sensitivity, accuracy, and density was studied, and its sensing and forming mechanism were discussed. By adjusting SLS process parameters to control the performance of porous structure sensor elements, a final TPU/CNT sensor element with a wide pressure detection range, high sensitivity, a fast response time, and good stability and durability was developed. Finally, the optimal performance of the developed flexible pressure sensor was successfully used to detect the pressure distribution of the human foot. This study provided a simple and effective research method to develop high-performance flexible pressure sensors.

Flexible Capacitive Pressure Sensors with Micro-Patterned Porous Dielectric Layer for Wearable Electronics

2022 ◽  
Author(s):  
Jing Wang ◽  
Longwei Li ◽  
Lanshuang Zhang ◽  
Panpan Zhang ◽  
Xiong Pu
Keyword(s):  
Pressure Sensor ◽  
Flexible Electronics ◽  
Dielectric Layer ◽  
Pressure Sensors ◽  
High Sensitivity ◽  
Capacitive Sensor ◽  
Human Motion ◽  
Capacitive Pressure Sensor ◽  
Wearable Electronics ◽  
Emulsified Water

Abstract Highly sensitive soft sensors play key roles in flexible electronics, which therefore have attracted much attention in recent years. Herein, we report a flexible capacitive pressure sensor with high sensitivity by using engineered micro-patterned porous polydimethylsiloxane (PDMS) dielectric layer through an environmental-friendly fabrication procedure. The porous structure is formed by evaporation of emulsified water droplets during PDMS curing process, while the micro-patterned structure is obtained via molding on sandpaper. Impressively, this structure renders the capacitive sensor with a high sensitivity up to 143.5 MPa-1 at the pressure range of 0.068~150 kPa and excellent anti-fatigue performance over 20,000 cycles. Meanwhile, the sensor can distinguish different motions of the same person or different people doing the same action. Our work illustrates the promising application prospects of this flexible pressure sensor for the security field or human motion monitoring area.

scholarly journals Ultra-Sensitive Flexible Pressure Sensor Based on Microstructured Electrode

Sensors ◽  
2020 ◽  
Vol 20 (2) ◽  
pp. 371 ◽  
Author(s):  
Mengmeng Li ◽  
Jiaming Liang ◽  
Xudong Wang ◽  
Min Zhang
Keyword(s):  
Pressure Sensor ◽  
Dielectric Layer ◽  
Pressure Sensors ◽  
High Sensitivity ◽  
Capacitive Sensor ◽  
Duty Ratio ◽  
Capacitive Pressure Sensor ◽  
Element Analysis ◽  
Sequential Coupling ◽  
Flexible Pressure Sensors

Flexible pressure sensors with a high sensitivity in the lower zone of a subtle-pressure regime has shown great potential in the fields of electronic skin, human–computer interaction, wearable devices, intelligent prosthesis, and medical health. Adding microstructures on the dielectric layer on a capacitive pressure sensor has become a common and effective approach to enhance the performance of flexible pressure sensors. Here, we propose a method to further dramatically increase the sensitivity by adding elastic pyramidal microstructures on one side of the electrode and using a thin layer of a dielectric in a capacitive sensor. The sensitivity of the proposed device has been improved from 3.1 to 70.6 kPa−1 compared to capacitive sensors having pyramidal microstructures in the same dimension on the dielectric layer. Moreover, a detection limit of 1 Pa was achieved. The finite element analysis performed based on electromechanical sequential coupling simulation for hyperelastic materials indicates that the microstructures on electrode are critical to achieve high sensitivity. The influence of the duty ratio of the micro-pyramids on the sensitivity of the sensor is analyzed by both simulation and experiment. The durability and robustness of the device was also demonstrated by pressure testing for 2000 cycles.

A porous and air gap elastomeric dielectric layer for wearable capacitive pressure sensor with high sensitivity and a wide detection range

2020 ◽  
Vol 8 (33) ◽  
pp. 11468-11476
Author(s):  
Wei Li ◽  
Xin Jin ◽  
Yide Zheng ◽  
Xudong Chang ◽  
Wenyu Wang ◽  
...  
Keyword(s):  
Pressure Sensor ◽  
Dielectric Layer ◽  
High Sensitivity ◽  
Capacitive Sensor ◽  
Air Gap ◽  
Capacitive Pressure Sensor ◽  
Detection Range ◽  
Highly Porous

Capacitive sensor combining highly porous PDMS and rough polypyrrole electrodes improves the device range and sensitivity.

scholarly journals Design of Flexible Pressure Sensor Based on Conical Microstructure PDMS-Bilayer Graphene

Sensors ◽  
2021 ◽  
Vol 21 (1) ◽  
pp. 289
Author(s):  
Lixia Cheng ◽  
Renxin Wang ◽  
Xiaojian Hao ◽  
Guochang Liu
Keyword(s):  
Pressure Sensor ◽  
Flexible Substrate ◽  
Pressure Sensors ◽  
High Sensitivity ◽  
Bilayer Graphene ◽  
Local Deformation ◽  
Vertical Force ◽  
Detection Range ◽  
Large Pressure ◽  
Flexible Pressure Sensor

As a new material, graphene shows excellent properties in mechanics, electricity, optics, and so on, which makes it widely concerned by people. At present, it is difficult for graphene pressure sensor to meet both high sensitivity and large pressure detection range at the same time. Therefore, it is highly desirable to produce flexible pressure sensors with sufficient sensitivity in a wide working range and with simple process. Herein, a relatively high flexible pressure sensor based on piezoresistivity is presented by combining the conical microstructure polydimethylsiloxane (PDMS) with bilayer graphene together. The piezoresistive material (bilayer graphene) attached to the flexible substrate can convert the local deformation caused by the vertical force into the change of resistance. Results show that the pressure sensor based on conical microstructure PDMS-bilayer graphene can operate at a pressure range of 20 kPa while maintaining a sensitivity of 0.122 ± 0.002 kPa−1 (0–5 kPa) and 0.077 ± 0.002 kPa−1 (5–20 kPa), respectively. The response time of the sensor is about 70 ms. In addition to the high sensitivity of the pressure sensor, it also has excellent reproducibility at different pressure and temperature. The pressure sensor based on conical microstructure PDMS-bilayer graphene can sense the motion of joint well when the index finger is bent, which makes it possible to be applied in electronic skin, flexible electronic devices, and other fields.

Radio Measurements of Coronal Magnetic Fields

1994 ◽  
Vol 144 ◽  
pp. 21-28 ◽  
Author(s):  
G. B. Gelfreikh
Keyword(s):  
Magnetic Field ◽  
Magnetic Fields ◽  
Solar Corona ◽  
Active Regions ◽  
High Sensitivity ◽  
Coronal Magnetic Field ◽  
Transverse Magnetic ◽  
Radio Sources ◽  
Radio Waves ◽  
Solar Active Regions

AbstractA review of methods of measuring magnetic fields in the solar corona using spectral-polarization observations at microwaves with high spatial resolution is presented. The methods are based on the theory of thermal bremsstrahlung, thermal cyclotron emission, propagation of radio waves in quasi-transverse magnetic field and Faraday rotation of the plane of polarization. The most explicit program of measurements of magnetic fields in the atmosphere of solar active regions has been carried out using radio observations performed on the large reflector radio telescope of the Russian Academy of Sciences — RATAN-600. This proved possible due to good wavelength coverage, multichannel spectrographs observations and high sensitivity to polarization of the instrument. Besides direct measurements of the strength of the magnetic fields in some cases the peculiar parameters of radio sources, such as very steep spectra and high brightness temperatures provide some information on a very complicated local structure of the coronal magnetic field. Of special interest are the results found from combined RATAN-600 and large antennas of aperture synthesis (VLA and WSRT), the latter giving more detailed information on twodimensional structure of radio sources. The bulk of the data obtained allows us to investigate themagnetospheresof the solar active regions as the space in the solar corona where the structures and physical processes are controlled both by the photospheric/underphotospheric currents and surrounding “quiet” corona.

Enhanced piezocapacitive response in zinc oxide tetrapod–poly(dimethylsiloxane) composite dielectric layer for flexible and ultrasensitive pressure sensor

Nanoscale ◽  
2021 ◽  
Vol 13 (12) ◽  
pp. 6076-6086
Author(s):  
Gen-Wen Hsieh ◽  
Shih-Rong Ling ◽  
Fan-Ting Hung ◽  
Pei-Hsiu Kao ◽  
Jian-Bin Liu
Keyword(s):  
Zinc Oxide ◽  
Pressure Sensor ◽  
Dielectric Layer ◽  
Pressure Sensors ◽  
Dielectric Matrix ◽  
First Time

Zinc oxide tetrapod is introduced for the first time within a poly(dimethylsiloxane) dielectric matrix for the formation of ultrasensitive piezocapacitive pressure sensors.

High-sensitivity fiber optic magnetic field sensor based on lossy mode resonance and hollow core-offset structure

2021 ◽  
pp. 1-12
Author(s):  
Xue-Peng Jin ◽  
Hong-Zhi Sun ◽  
Shuo-Wei Jin ◽  
Wan-Ming Zhao ◽  
Jing-Ren Tang ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Fiber Optic ◽  
High Sensitivity ◽  
Magnetic Field Sensor ◽  
Hollow Core ◽  
Field Sensor
Sign in / Sign up

Export Citation Format

Share Document