scholarly journals Efficient broadband light absorption in thin-film a-Si solar cell based on double sided hybrid bi-metallic nanogratings

RSC Advances ◽  
2020 ◽  
Vol 10 (20) ◽  
pp. 11836-11842 ◽  
Author(s):  
Fazal E. Subhan ◽  
Aimal Daud Khan ◽  
Fazal E. Hilal ◽  
Adnan Daud Khan ◽  
Sultan Daud Khan ◽  
...  
Keyword(s):  
Thin Film ◽  
Solar Cells ◽  
Solar Cell ◽  
Light Absorption ◽  
Thin Film Solar Cells ◽  
Small Thickness ◽  
Practical Applications ◽  
Si Solar Cell

Thin film solar cells (TFSCs) suffer from poor light absorption due to their small thickness, which limits most of their practical applications.

scholarly journals Plasmonic Nanostructure for Enhanced Light Absorption in Ultrathin Silicon Solar Cells

2012 ◽  
Vol 2012 ◽  
pp. 1-8 ◽  
Author(s):  
Jinna He ◽  
Chunzhen Fan ◽  
Junqiao Wang ◽  
Yongguang Cheng ◽  
Pei Ding ◽  
...  
Keyword(s):  
Thin Film ◽  
Solar Cells ◽  
Solar Cell ◽  
Surface Plasmon ◽  
Light Absorption ◽  
Solar Spectrum ◽  
Thin Film Solar Cells ◽  
Absorption Enhancement ◽  
Plasmonic Nanostructures ◽  
Cell Design

The performances of thin film solar cells are considerably limited by the low light absorption. Plasmonic nanostructures have been introduced in the thin film solar cells as a possible solution around this issue in recent years. Here, we propose a solar cell design, in which an ultrathin Si film covered by a periodic array of Ag strips is placed on a metallic nanograting substrate. The simulation results demonstrate that the designed structure gives rise to 170% light absorption enhancement over the full solar spectrum with respect to the bared Si thin film. The excited multiple resonant modes, including optical waveguide modes within the Si layer, localized surface plasmon resonance (LSPR) of Ag stripes, and surface plasmon polaritons (SPP) arising from the bottom grating, and the coupling effect between LSPR and SPP modes through an optimization of the array periods are considered to contribute to the significant absorption enhancement. This plasmonic solar cell design paves a promising way to increase light absorption for thin film solar cell applications.

High Haze and Low Resistive MgO/AZO Bi-layer Transparent Conducting Oxide for Thin Film Solar Cells

2011 ◽  
Vol 1327 ◽  
Author(s):  
Dong Won Kang ◽  
Jong Seok Woo ◽  
Sung Hwan Choi ◽  
Seung Yoon Lee ◽  
Heon Min. Lee ◽  
...  
Keyword(s):  
Thin Film ◽  
Solar Cells ◽  
Solar Cell ◽  
Silicon Solar Cell ◽  
Transparent Conducting Oxide ◽  
Visible Region ◽  
Xrd Analysis ◽  
Thin Film Solar Cells ◽  
Microcrystalline Silicon ◽  
Transparent Conducting

ABSTRACTWe have propsed MgO/AZO bi-layer transparent conducting oxide (TCO) for thin film solar cells. From XRD analysis, it was observed that the full width at half maximum of AZO decreased when it was grown on MgO precursor. The Hall mobility of MgO/AZO bi-layer was 17.5cm2/Vs, whereas that of AZO was 20.8cm2/Vs. These indicated that the crystallinity of AZO decreased by employing MgO precursor. However, the haze (=total diffusive transmittance/total transmittance) characteristics of highly crystalline AZO was significantly improved by MgO precursor. The average haze in the visible region increased from 14.3 to 48.2%, and that in the NIR region increased from 6.3 to 18.9%. The reflectance of microcrystalline silicon solar cell was decreased and external quantum efficiency was significantly improved by applying MgO/AZO bi-layer TCO. The efficiency of microcrystalline silicon solar cell with MgO/AZO bi-layer front TCO was 6.66%, whereas the efficiency of one with AZO single TCO was 5.19%.

Thin‐film solar cells exceeding 22% solar cell efficiency: An overview on CdTe-, Cu(In,Ga)Se2-, and perovskite-based materials

2018 ◽  
Vol 5 (4) ◽  
pp. 041602 ◽  
Author(s):  
Michael Powalla ◽  
Stefan Paetel ◽  
Erik Ahlswede ◽  
Roland Wuerz ◽  
Cordula D. Wessendorf ◽  
...  
Keyword(s):  
Thin Film ◽  
Solar Cells ◽  
Solar Cell ◽  
Thin Film Solar Cells ◽  
Solar Cell Efficiency ◽  
Cell Efficiency

Fabrication of earth-abundant Cu2ZnSn(S,Se)4 light absorbers by a sol–gel and selenization route for thin film solar cells

RSC Advances ◽  
2016 ◽  
Vol 6 (8) ◽  
pp. 6562-6570 ◽  
Author(s):  
Fang Qin Zeng ◽  
Yan Qing Lai ◽  
Zi Li Han ◽  
Boon K. Ng ◽  
Zhi An Zhang ◽  
...  
Keyword(s):  
Thin Film ◽  
Solar Cells ◽  
Solar Cell ◽  
Thin Film Solar Cell ◽  
Sol Gel ◽  
Thin Film Solar Cells ◽  
Gel Method ◽  
Sol Gel Method ◽  
Earth Abundant ◽  
Light Absorbers

A CZTSSe thin film solar cell was fabricated by a sol–gel method with an efficiency of 8.08%.

Influence of precursor type on non-toxic hybrid inks for high-efficiency Cu2ZnSnS4 thin-film solar cells

2014 ◽  
Vol 16 (9) ◽  
pp. 4323-4332 ◽  
Author(s):  
Kyujin Kim ◽  
Inhyuk Kim ◽  
Yunjung Oh ◽  
Daehee Lee ◽  
Kyoohee Woo ◽  
...  
Keyword(s):  
Thin Film ◽  
Solar Cells ◽  
Solar Cell ◽  
High Efficiency ◽  
Thin Film Solar Cells ◽  
Cu2znsns4 Thin Film

A Cu2ZnSnS4 solar cell with an efficiency of 8.17% was fabricated using a non-toxic solvent-based hybrid-ink without the involvement of a complex synthesis, toxic solvents or harmful post-selenization.

Efficient Thin-Film Polycrystalline-Silicon Solar Cells Based on Aluminium-Induced Crystallization

2007 ◽  
Vol 989 ◽  
Author(s):  
Ivan Gordon ◽  
Lode Carnel ◽  
Dries Van Gestel ◽  
Guy Beaucarne ◽  
Jef Poortmans
Keyword(s):  
Thin Film ◽  
Solar Cells ◽  
Solar Cell ◽  
Current Density ◽  
Polycrystalline Silicon ◽  
Cell Process ◽  
Cell Efficiency ◽  
Si Solar Cell ◽  
Si Solar Cells ◽  
Induced Crystallization

AbstractEfficient thin-film polycrystalline-silicon (pc-Si) solar cells on inexpensive substrates could lower the price of photovoltaic electricity substantially. At the MRS conference in 2006, we presented a pc-Si solar cell with an efficiency of 5.9% that had an absorber layer made by aluminum-induced crystallization (AIC) of amorphous silicon followed by high-temperature epitaxial thickening. The efficiency of this cell was mainly limited by the current density. To obtain higher efficiencies, we therefore need to implement an effective light trapping scheme in our pc-Si solar cell process. In this work, we describe how we recently enhanced the current density and efficiency of our cells. We achieved a cell efficiency of 8.0% for pc-Si cells in substrate configuration. Our cell process is based on pc-Si layers made by AIC and thermal CVD on smoothened alumina substrates. The cells are in substrate configuration with deposited a-Si heterojunction emitters and interdigitated top contacts. The front surface of the cells is plasma textured which leads to an increase in current density. The current density is further enhanced by minimizing the back surface field thickness of the cells to reduce the light loss in this layer. Our present pc-Si solar cell efficiency together with the fast progression that we have made over the last few years indicate the large potential of pc-Si solar cells based on the AIC seed layer approach.

Highly improvement in efficiency of Cu(In,Ga)Se2 thin film solar cells

2020 ◽  
Vol 17 (4) ◽  
pp. 527-533
Author(s):  
Mohsen Sajadnia ◽  
Sajjad Dehghani ◽  
Zahra Noraeepoor ◽  
Mohammad Hossein Sheikhi
Keyword(s):  
Thin Film ◽  
Solar Cells ◽  
Solar Cell ◽  
Thin Film Solar Cell ◽  
Trap Density ◽  
Thin Film Solar Cells ◽  
Content Type ◽  
Cigs Thin Film ◽  
Absorbing Layer ◽  
Cigs Solar Cells

Purpose The purpose of this study is to design and optimize copper indium gallium selenide (CIGS) thin film solar cells. Design/methodology/approach A novel bi-layer CIGS thin film solar cell based on SnS is designed. To improve the performance of the CIGS based thin film solar cell a tin sulfide (SnS) layer is added to the structure, as back surface field and second absorbing layer. Defect recombination centers have a significant effect on the performance of CIGS solar cells by changing recombination rate and charge density. Therefore, performance of the proposed structure is investigated in two stages successively, considering typical and maximum reported trap density for both CIGS and SnS. To achieve valid results, the authors use previously reported experimental parameters in the simulations. Findings First by considering the typical reported trap density for both SnS and CIGS, high efficiency of 36%, was obtained. Afterward maximum reported trap densities of 1 × 1019 and 5.6 × 1015 cm−3 were considered for SnS and CIGS, respectively. The efficiency of the optimized cell is 27.17% which is achieved in CIGS and SnS thicknesses of cell are 0.3 and 0.1 µm, respectively. Therefore, even in this case, the obtained efficiency is well greater than previous structures while the absorbing layer thickness is low. Originality/value Having results similar to practical CIGS solar cells, the impact of the defects of SnS and CIGS layers was investigated. It was found that affixing SnS between CIGS and Mo layers causes a significant improvement in the efficiency of CIGS thin-film solar cell.

scholarly journals Super absorption of solar energy using a plasmonic nanoparticle based CdTe solar cell

RSC Advances ◽  
2019 ◽  
Vol 9 (59) ◽  
pp. 34207-34213 ◽  
Author(s):  
Qandeel Rehman ◽  
Aimal Daud Khan ◽  
Adnan Daud Khan ◽  
Muhammad Noman ◽  
Haider Ali ◽  
...  
Keyword(s):  
Thin Film ◽  
Solar Cells ◽  
Solar Cell ◽  
Solar Energy ◽  
Cost Reduction ◽  
Thin Film Solar Cells ◽  
Photon Absorption ◽  
Plasmonic Nanoparticles ◽  
Substantial Cost ◽  
Plasmonic Nanoparticle

Improving the photon absorption in thin-film solar cells with plasmonic nanoparticles is essential for the realization of extremely efficient cells with substantial cost reduction.

Sign in / Sign up

Export Citation Format

Share Document