Stretchable/flexible silver nanowire electrodes for energy device applications

Nanoscale ◽  
2019 ◽  
Vol 11 (43) ◽  
pp. 20356-20378 ◽  
Author(s):  
Jinwook Jung ◽  
Hyunmin Cho ◽  
Recep Yuksel ◽  
Dongkwan Kim ◽  
Habeom Lee ◽  
...  
Keyword(s):  
Silver Nanowires ◽  
Silver Nanowire ◽  
Energy Device ◽  
Energy Devices ◽  
Device Applications

This review focuses on the silver nanowires (Ag NWs) based stretchable and flexible energy devices for self-sustainable devices.

Recent progress in post treatment of silver nanowire electrodes for optoelectronic device applications

Nanoscale ◽  
2021 ◽  
Author(s):  
Chi Ma ◽  
Yue-Feng Liu ◽  
Yan-Gang Bi ◽  
Xu-lin Zhang ◽  
Da Yin ◽  
...  
Keyword(s):  
Recent Progress ◽  
Silver Nanowires ◽  
Optoelectronic Device ◽  
Post Treatment ◽  
Silver Nanowire ◽  
Solution Synthesis ◽  
Suitable Alternative ◽  
Practical Solution ◽  
Alternative Materials ◽  
Device Applications

Owing to the economical and practical solution synthesis and coating strategies, the silver nanowires (AgNWs) has been considered as one of the most suitable alternative materials to commercial indium tin...

scholarly journals Recycling silver nanoparticle debris from laser ablation of silver nanowire in liquid media toward minimum material waste

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
June Sik Hwang ◽  
Jong-Eun Park ◽  
Gun Woo Kim ◽  
Hyeono Nam ◽  
Sangseok Yu ◽  
...  
Keyword(s):  
Laser Ablation ◽  
Silver Nanoparticle ◽  
Building Materials ◽  
Raw Materials ◽  
Silver Nanowires ◽  
Silver Nanowire ◽  
Liquid Media ◽  
Ag Nps ◽  
Laser Patterning ◽  
Inexpensive Procedure

AbstractAs silver nanowires (Ag NWs) are usually manufactured by chemical synthesis, a patterning process is needed to use them as functional devices. Pulsed laser ablation is a promising Ag NW patterning process because it is a simple and inexpensive procedure. However, this process has a disadvantage in that target materials are wasted owing to the subtractive nature of the process involving the removal of unnecessary materials, and large quantities of raw materials are required. In this study, we report a minimum-waste laser patterning process utilizing silver nanoparticle (Ag NP) debris obtained through laser ablation of Ag NWs in liquid media. Since the generated Ag NPs can be used for several applications, wastage of Ag NWs, which is inevitable in conventional laser patterning processes, is dramatically reduced. In addition, electrophoretic deposition of the recycled Ag NPs onto non-ablated Ag NWs allows easy fabrication of junction-enhanced Ag NWs from the deposited Ag NPs. The unique advantage of this method lies in using recycled Ag NPs as building materials, eliminating the additional cost of junction welding Ag NWs. These fabricated Ag NW substrates could be utilized as transparent heaters and stretchable TCEs, thereby validating the effectiveness of the proposed process.

scholarly journals Effects of Concentration and Spin Speed on the Optical and Electrical Properties of Silver Nanowire Transparent Electrodes

Materials ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2219
Author(s):  
Xiaopeng Li ◽  
Jiayue Zhou ◽  
Dejun Yan ◽  
Yong Peng ◽  
Yong Wang ◽  
...  
Keyword(s):  
Sheet Resistance ◽  
Spin Coating ◽  
Figure Of Merit ◽  
Silver Nanowires ◽  
Solution Concentration ◽  
Ethanol Solution ◽  
Silver Nanowire ◽  
Optical And Electrical Properties ◽  
Transparent Electrodes ◽  
Spin Speed

In this paper, silver nanowires (AgNWs) with a diameter of 40 nm and a length of 45 μm were dispersed into an ethanol solution to prepare AgNW solutions with concentrations of 1, 2, and 3 mg/mL, respectively. The AgNW solutions were then deposited on a glass substrate using spin-coating at 1000, 2000, and 3000 rpm for 45 s, respectively, to prepare transparent electrodes. The results showed that the distribution of AgNWs on the substrate increased in density with the increase in the AgNW solution concentration and the decrease in spin speed. The effect of concentration on the distribution of AgNWs was greater than that of the spin speed. The transmittance of each electrode was between 84.19% and 88.12% at 550 nm, the average sheet resistance was between 20.09 and 358.11 Ω/sq, the highest figure of merit (FoM) was 104.42, and the lowest haze value was 1.48%. The electrode prepared at 1000 rpm with a concentration of 2 mg/mL and that prepared at 3000 rpm with a concentration of 3 mg/mL were very similar in terms of the average sheet resistance, transmittance at 550 nm, FoM, and haze value; thus, these two electrodes could be considered equivalent. The haze value of the electrode was positively correlated with the spin speed at low concentration, but that relationship became inverse as the concentration rose. For the AgNWs used in this experiment with an aspect ratio of 1125, the concentration of the AgNW solution should reach at least 2 mg/mL to ensure that the FoM of the electrode is greater than 35.

Highly flexible and transparent dielectric elastomer actuators using silver nanowire and carbon nanotube hybrid electrodes

Soft Matter ◽  
2017 ◽  
Vol 13 (37) ◽  
pp. 6390-6395 ◽  
Author(s):  
Ye Rim Lee ◽  
Hyungho Kwon ◽  
Do Hoon Lee ◽  
Byung Yang Lee
Keyword(s):  
Carbon Nanotubes ◽  
Carbon Nanotube ◽  
Silver Nanowires ◽  
Dielectric Elastomer ◽  
Silver Nanowire ◽  
Dielectric Elastomer Actuator ◽  
Dielectric Elastomer Actuators ◽  
Transparent Dielectric ◽  
Optically Transparent ◽  
Highly Stretchable

Electrodes consisting of silver nanowires and carbon nanotubes enable a dielectric elastomer actuator to become highly stretchable and optically transparent.

Solution-Processable Vertical Organic Light-Emitting Transistors (VOLETs) with Directly Deposited Silver Nanowires Intermediate Source Electrode

2019 ◽  
Vol 19 (11) ◽  
pp. 6995-7003 ◽  
Author(s):  
Mohd Arif Mohd Sarjidan ◽  
Ahmad Shuhaimi ◽  
Wan Haliza Abd. Majid
Keyword(s):  
Gate Voltage ◽  
Silver Nanowires ◽  
Silver Nanowire ◽  
Morphological Properties ◽  
Semiconductor Layer ◽  
Small Magnitude ◽  
Light Emitting ◽  
Organic Light ◽  
Light Emitting Transistors ◽  
Source Electrode

A simple spin-coating process for fabricating vertical organic light-emitting transistors (VOLETs) is realized by utilizing silver nanowire (AgNW) as a source electrode. The optical, electrical and morphological properties of the AgNW formation was initially optimized, prior VOFET fabrication. A high molecular weight of poly[2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene] MEH-PPV was used as an organic semiconductor layer in the VOFET in forming a multilayer structure by solution process. It was found that current density and luminance intensity of the VOLET can be modulated by a small magnitude of gate voltage. The modulation process was induced by changing an injection barrier via gate voltage bias. A space-charge-limited current (SCLC) approach in determining transistor mobility has been introduced. This preliminary and fundamental work is beneficial towards all-solution processing display devices.

scholarly journals Hexagonal and Square Patterned Silver Nanowires/PEDOT:PSS Composite Grids by Screen Printing for Uniformly Transparent Heaters

Polymers ◽  
2019 ◽  
Vol 11 (3) ◽  
pp. 468 ◽  
Author(s):  
Xin He ◽  
Gengzhe Shen ◽  
Ruibin Xu ◽  
Weijia Yang ◽  
Chi Zhang ◽  
...  
Keyword(s):  
Screen Printing ◽  
Silver Nanowires ◽  
Composite Films ◽  
Silver Nanowire ◽  
Mass Ratio ◽  
Large Area ◽  
High Transparency ◽  
Square Grid ◽  
Photoelectric Properties ◽  
Printing Parameters

Transparent conductive films with hexagonal and square patterns were fabricated on poly(ethylene terephthalate) (PET) substrates by screen printing technology utilizing a poly(3,4-ethylenedioxythiophene) poly(styrenesulfonate) (PEDOT:PSS) and silver nanowire (Ag NWs) composite ink. The printing parameters—mesh number, printing layer, mass ratio of PEDOT:PSS to Ag NWs and pattern shape—have a significant influence on the photoelectric properties of the composite films. The screen mesh with a mesh number of 200 possesses a suitable mesh size of 74 µm for printing clear and integrated grids with high transparency. With an increase in the printing layer and a decrease in the mass ratio of PEDOT:PSS to Ag NWs, the transmittance and resistance of the printed grids both decreased. When the printing layer is 1, the transmittance and resistance are 85.6% and 2.23 kΩ for the hexagonal grid and 77.3% and 8.78 kΩ for the square grid, indicating that the more compact arrangement of square grids reduces the transmittance, and the greater number of connections of the square grid increases the resistance. Therefore, it is believed that improved photoelectric properties of transparent electrodes could be obtained by designing a printing pattern with optimized printing parameters. Additionally, the Ag NWs/PEDOT:PSS composite films with hexagonal and square patterns exhibit high transparency and good uniformity, suggesting promising applications in large-area and uniform heaters.

Repeatable and High-Efficiency Patterning of Silver Nanowires on PDMS Using Micromilled Aluminum Molds

2019 ◽  
Vol 7 (4) ◽  
Author(s):  
Rick Helgason ◽  
Ayan Choudhury ◽  
Yongjun Lai
Keyword(s):  
Efficient Method ◽  
Strain Gauge ◽  
High Efficiency ◽  
Silver Nanowires ◽  
Silver Nanowire ◽  
Two Dimensional ◽  
Wide Range ◽  
Sharp Edges

Abstract We present an inexpensive, repeatable, and efficient method of patterning silver nanowires onto polydimethylsiloxane (PDMS) using a mold-based approach. A micromilling machine is used to prepare an aluminum mold with a raised pattern so that PDMS cured in these molds is imprinted with the design. A solution of silver nanowires and ethanol can then be injected into the pattern. This method can be used to pattern silver nanowires onto PDMS in any two-dimensional (2D) layout, meaning it can be extended to produce a wide range of PDMS/silver nanowire-based sensors and devices. We demonstrate this by the development of two separate patterns. An intricate logo is developed in order to demonstrate the capability of patterning curved and sharp edges, and a strain gauge is developed in order to demonstrate a functional device.

scholarly journals Development of a Two Port Laparoscopic Appendectomy Technique at a Rural Hospital

2019 ◽  
Vol 2019 ◽  
pp. 1-7
Author(s):  
Hugo J. R. Bonatti
Keyword(s):  
Laparoscopic Appendectomy ◽  
New Technologies ◽  
Surgical Site Infections ◽  
Standard Technique ◽  
Rural Hospital ◽  
Study Cohort ◽  
Port Placement ◽  
Energy Device ◽  
Energy Devices ◽  
Number Of Patients

Background. Laparoscopic appendectomy (LA) is most commonly performed using two 5-mm and one 10/12-mm ports. Various attempts to reduce the number and size of ports have been made and new technologies such as single port LA have been introduced. Appendix and mesoappendix are usually divided with a stapler or energy device with electrocautery, clips, and endoloop being cheaper options.Patients and Methods. This study includes 51 consecutive LAs performed at a rural hospital. Patients were divided into 4 groups: group 1 was the standard technique group (n=12), group 2 served as a “try-out” (n=12), group 3 served as feasibility group (n=12), and group 4 was the final patient cohort in which the optimized technique was preferably used (n=15).Results. Median age of the study cohort was 35.4 (range: 6.2-80.6) years, and 55% of patients were male. Whereas in G1 all patients had standard port placement (10/12-mm, 2x5-mm), in an increasing number of patients in G2-4 only two 5-mm ports and the 2.3-mm Teleflex minigrasper were inserted. Usage of staplers and/or energy devices was reduced from 100% in G1 to 20% in G4, and in the majority of cases both the appendix and the vascular pedicle were secured with an endoloop. The new technique did not add time to the procedure or total OR time. No stump-leaks or surgical site infections were encountered in this series, and there were no conversions to open surgery. Cost savings when not using a stapler or energy device are approximately 400$ per case; the minigrasper added approximately 200$ to the case.Discussion. LA with use of two ports and a portless needle grasper is feasible in the majority of cases and was associated with high patient satisfaction and excellent cosmetic results. Avoiding energy devices and staplers is cost saving; the endoloop securely controls appendix and mesoappendix.

A highly stretchable and transparent silver nanowire/thermoplastic polyurethane film strain sensor for human motion monitoring

2019 ◽  
Vol 6 (11) ◽  
pp. 3119-3124 ◽  
Author(s):  
Runfei Wang ◽  
Wei Xu ◽  
Wenfeng Shen ◽  
Xiaoqing Shi ◽  
Jian Huang ◽  
...  
Keyword(s):  
Silver Nanowires ◽  
Thermoplastic Polyurethane ◽  
Human Motion ◽  
Strain Sensors ◽  
Silver Nanowire ◽  
Transparent Film ◽  
Polyurethane Film ◽  
Highly Stretchable ◽  
Human Motion Monitoring ◽  
Human Motions

Transparent film strain sensors based on silver nanowires and thermoplastic polyurethane are promising candidates for detecting various human motions and monitoring the mass of some kinetic objects.

Sign in / Sign up

Export Citation Format

Share Document