Removing scale-forming cations from produced waters

2020 ◽  
Vol 6 (1) ◽  
pp. 132-143 ◽  
Author(s):  
Karen Shafer-Peltier ◽  
Colton Kenner ◽  
Eric Albertson ◽  
Ming Chen ◽  
Stephen Randtke ◽  
...  
Keyword(s):  
Oil Recovery ◽  
Oil And Gas ◽  
Produced Water ◽  
Gas Production ◽  
Oil And Gas Production ◽  
Production Water ◽  
Produced Waters

The formation of precipitates (scales) during reinjection limits the reuse of oil and gas production water (produced water) for additional oil recovery.

Water treatment technology for produced water

2010 ◽  
Vol 62 (10) ◽  
pp. 2372-2380 ◽  
Author(s):  
Angéla Szép ◽  
Robert Kohlheb
Keyword(s):  
Membrane Filtration ◽  
Oil And Gas ◽  
Produced Water ◽  
Mobile Station ◽  
Cost Effective ◽  
Gas Production ◽  
Treatment Technology ◽  
Oil And Gas Production ◽  
Produced Waters ◽  
Physical And Chemical

Large amounts of produced water are generated during oil and gas production. Produced water, as it is known in the oil industry, is briny fluid trapped in the rock of oil reservoirs. The objective of this study was to test produced waters from a Montana USA oilfield using a mobile station to design a plant to cost efficiently treat the produced water for agricultural irrigation. We used combined physical and chemical treatment of produced water in order to comply with reuse and discharge limits. This mobile station consists of three stages: pretreatments, membrane filtration and post treatment. Two spiral-wound membrane units were employed and the rejections of various constituents were examined. The performance of two membranes, 20 kDa weight cut-off (MWCO) ultrafiltration and a polyamide-composite reverse osmosis membrane was investigated. The mobile station effectively decreased conductivity by 98%, COD by 100% and the SAR by 2.15 mgeqv0.5 in the produced water tested in this study. Cost analysis showed that the treatment cost of produced water is less expensive than to dispose of it by injection and this treated water may be of great value in water-poor regions. We can conclude that the mobile station provided a viable and cost-effective result to beneficial use of produced water.

Achieving Indonesian Oil and Gas production to 1 million barrels per day by 2030 using Nanoflooding as Novel EOR Method: Dream vs. Reality

2021 ◽  
Author(s):  
L. Hendraningrat
Keyword(s):  
Oil Recovery ◽  
Cost Efficiency ◽  
Oil And Gas ◽  
Gas Production ◽  
Oil Price ◽  
Efficient Manner ◽  
Oil And Gas Production ◽  
Cost Efficient ◽  
Nano Size ◽  
Production Target

In low oil price environments, conducting affordable enhanced oil recovery (EOR) projects can be very challenging. One item of interest for successful future EOR should be in how produced fluids are treated and how to achieve cost-efficiency. Nanoflooding, is an emerging EOR technique, which has attracted deployment in recent years. Meanwhile, Indonesia continues to progress towards the national oil and gas production target of one million barrels per day by 2030. This paper presents the observation of opportunities and challenges of using nanoflooding to enable oil and gas production in Indonesia to achieve its desired targets. The study began by mapping the pain points in major oilfields in Indonesia. We observed and discussed the advantage and limitation of traditional mature EOR techniques, status, and ongoing application of EOR in Indonesia. Then, we briefly explained the main reasons why nanoflooding can be considered for future implementation in accelerating oil production in Indonesia, including a discussion about a successful pilot test. As an emerging EOR technique, nanoflooding can be considered as a cost-efficient technique. Silica-based nanofluid can be accessed in a cost-efficient manner and can be executed from an implementation standpoint considering surface facilities. The mechanism that is introduced can help to displace incremental oil more effectively since it can go inside pore throats due to the nano-size. We observed several recognized benefits and challenges to deploy nanoflooding in Indonesia. Based on this study, nanoflooding is very attractive and has potential to be implemented.

scholarly journals A REVIEW OF NANOTECHNOLOGY APPLICATIONS IN THE OIL AND GAS INDUSTRIES

2019 ◽  
pp. 1-14
Author(s):  
B.M. Das ◽  
D. Dutta
Keyword(s):  
Oil Recovery ◽  
Oil And Gas ◽  
New Technology ◽  
Minimum Cost ◽  
Gas Production ◽  
Oil Fields ◽  
Drilling Fluids ◽  
Oil And Gas Production ◽  
Exploration And Production ◽  
Exploration Drilling

Nanotechnology encompasses the science and technology of objects with sizes ranging from 1 nm to 100 nm. Today, exploration and production from conventional oil and gas wells have reached a stage of depletion. Newer technologies have been developed to address this problem. Maximum oil production at a minimum cost is currently a huge challenge. This paper reviews nanotechnology applications in the oil and gas production sector, including in the fields of exploration, drilling, production, and waste management in oil fields, as well as their environmental concerns. The paper reviews experimental observations carried out by various researchers in these fields. The effect of various nanoparticles, such as titanium oxide, magnesium oxide, zinc oxide, copper oxide, and carbon nanotubes in drilling fluids and silica nanoparticles in enhanced oil recovery, has been observed and studied. This paper gives a detailed review of the benefits of nanotechnology in oil exploration and production. The fusion of nanotechnology and petroleum technology can result in great benefits. The physics and chemistry of nanoparticles and nanostructures are very new to petroleum technology. Due to the greater risk associated with adapting new technology, nanotechnology has been slow to gain widespread acceptance in the oil and gas industries. However, the current economic conditions have become a driving force for newer technologies.

Integrated Approach to Produced Water Disposal Management in a Brown Field: Safeguarding Production, Reducing Cost, Managing Deferment & Reducing HSSE Exposure

2021 ◽  
Author(s):  
Basil Ogbunude ◽  
Aniekan Obot ◽  
Abdul-Wahab Sa'ad ◽  
Sunday Maxwell-Amgbaduba ◽  
Etta Agbor ◽  
...  
Keyword(s):  
Water Management ◽  
Oil And Gas ◽  
Produced Water ◽  
Integrated Approach ◽  
Gas Production ◽  
Plant Oil ◽  
Endurance Time ◽  
Oil And Gas Production ◽  
Liquid Line ◽  
Positive Cash Flow

Abstract Often, the production of oil and gas from underground reservoirs is accompanied by produced water which generally increases with time for a matured field, attributable to natural water encroachment, bottom water ingress, coning effect due to higher production rates, channeling effects, etc. This trend poses a production challenge with respect to increased OPEX cost and environmental considerations of treatment/handling and disposal of the produced water considering the late life performance characterized by low reward margins. Hence, produced water management solutions that reduce OPEX cost is key to extending the field life whilst ensuring a positive cash flow for the asset. SK field is located in the Swamp Area of the Niger Delta, with a capacity of 1.1Bcf gas plant supplying gas to a nearby LNG plant. Oil and gas production from the field is evacuated via the liquid and gas trunk lines respectively. Due to the incessant tampering with oil delivery lines and environmental impact of spillage, the condensate is spiked through the gas trunk line to the LNG plant. Largely, the water/effluent contained in the tank is evacuated through the liquid line. Based on the availability of the liquid line (ca. 40%-60%), the produced water is a constraint to gas production with estimated tank endurance time (ca. 8 days at 500MMscfd). This leads to creaming of gas production and indeed gas deferments due to produced water management, making it difficult to meet the contractual supply obligation to the LNG plant. An interim solution adopted was to barge the produced water to the oil and gas export terminal, with an associated OPEX cost of ca. US$2Mln/month. Upon further review of an alternate barging option, this option was considered too expensive, inefficient and unsustainable with inherent HSSE exposure. Therefore, a produced water re-injection project was scoped and executed as a viable alternative to produced water management. This option was supported by the Regulators as a preferred option for produced water management for the industry.

Control of produced water with highly corrosive medium in oil-gas production

2021 ◽  
pp. 24-27
Author(s):  
F.G. Hasanov ◽  
◽  
S.B. Bayramov ◽  
R.M. Hasanzade ◽  
A.B. Garayev ◽  
...  
Keyword(s):  
Corrosive Medium ◽  
Oil And Gas ◽  
Produced Water ◽  
Gas Production ◽  
Electrochemical Protection ◽  
Oil And Gas Production ◽  
Separation Unit ◽  
Associated Gas ◽  
Initial Separation ◽  
Oil Water

The construction of middle oil-gathering facility, in which technological processes are managed in a closed medium is necessary for environmental protection to control highly corrosive medium in oil and gas production. Associated gas separated from the fluid in initial separation unit within middle oil-gathering facility enters gas-gathering point with low pressure, and the liquid - into the pig of oil, water and sand, which should be constructed from iron concrete for cleaning from mechanical impurities sediments and salt as well. The liquid charge from the separation unit and pig of oil, water and sand is based upon the law of communicating vessels. To supply long-life for reservoirs, the inner and outer walls should be covered with a special coating and additionally, electrochemical protection should be provided as well.

scholarly journals Investigation of Carbon Dioxide Corrosion Inhibitors for Steel for Use in Oil and Gas Production

2020 ◽  
Vol 129 (4) ◽  
pp. 14-18
Author(s):  
L. A. Magadova ◽  
◽  
K. A. Poteshkina ◽  
V. D. Vlasova ◽  
M. S. Pilipenko ◽  
...  
Keyword(s):  
Carbon Dioxide ◽  
Corrosion Inhibitors ◽  
Oil And Gas ◽  
Produced Water ◽  
Gas Production ◽  
Gravimetric Analysis ◽  
Carbon Dioxide Corrosion ◽  
Oil And Gas Production ◽  
Protective Properties ◽  
Industrial Samples

The effect of carbon dioxide corrosion on the pipeline transport system and its protection methods are considered in this article. The corrosion inhibitors represented by imidazoline-based compositions and industrial samples of corrosion inhibitors are used as protective reagents, and the model of produced water saturated with carbon dioxide is used as an aggressive environment. The protective properties of inhibitors and the corrosion rate were evaluated by gravimetric analysis. The paper presents the results of the study of industrial samples and inhibitory compositions developed on the basis of the REC “Promyslovaya himiya”. According to the results of the work, a positive effect of additives of nonionic surfactants on the protective properties of inhibitors was noted.

scholarly journals ANALISIS PENGOLAHAN AIR TERPRODUKSI DI WATER TREATING PLANT PERUSAHAAN EKSPLOITASI MINYAK BUMI (STUDI KASUS: PT XYZ)

2015 ◽  
Vol 12 (2) ◽  
pp. 78
Author(s):  
Pertiwi Andarani ◽  
Arya Rezagama
Keyword(s):  
Oil Recovery ◽  
Oil And Gas ◽  
High Efficiency ◽  
Produced Water ◽  
Enhanced Recovery ◽  
Good Condition ◽  
Gas Production ◽  
Energy Company ◽  
Steam Flooding ◽  
Water Handling

The exploration and production process of oil and its supporting operations always generates wasteas by-product. If they are uncontrolled, it might decrease the environmental quality. Thus, it isnecessary to manage and treat the waste in order to meet the regulation standard of quality andquantity. PT XYZ is an energy company, particularly oil and gas production, which its productionactivity generate a large amount of waste as well as produced water. Thus, PT XYZ must havefacilities or produced water handling plant which could minimize pollution caused by produced water.PT XYZ already has a system of produced water handling with recycling principle. After oil and waterseparation including water treating at Water Treating Plant (WTP), produced water will be used forsteam injection. This is the part of enhanced oil recovery by steam flooding in Duri Field. Besides,produced water could be used as backwash water at WTP, that is Oil Removal Filter (ORF) and WaterSoftener, which is called brine water. If the produced water and brine water is over load the capacity ofoil enhanced recovery injection, it might be disposed through injection to Disposal Well and there arecertain condition that produced water should be discharged into canal. The objective f this study is toanalyze the performance of a water treating plant in PT XYZ. Water Treating Plant is a facility fortreating produced water. Basically, WTP is on good condition and each unit has high efficiency forseparating oil and water (60-99%). Horizontal velocity at pit #A of API Separator was larger than thedesign criteria. In addition, Water Softeners have efficiency until 99% for the hardness.

Sign in / Sign up

Export Citation Format

Share Document