Staging Na/K-ion de-/intercalation of graphite retrieved from spent Li-ion batteries: in operando X-ray diffraction studies and an advanced anode material for Na/K-ion batteries

2019 ◽  
Vol 12 (12) ◽  
pp. 3575-3584 ◽  
Author(s):  
Hao-Jie Liang ◽  
Bao-Hua Hou ◽  
Wen-Hao Li ◽  
Qiu-Li Ning ◽  
Xu Yang ◽  
...  
Keyword(s):  
Anode Material ◽  
Li Ion Batteries ◽  
X Ray Diffraction ◽  
X Ray ◽  
Li Ion ◽  
In Operando

The exhausted graphite from spent Li-ion batteries is recycled and reused as a favorable anode for Na/K-ion batteries, and the insights into structural de-/intercalation model are realized.

High-Performance Li-Ion Batteries Using Nickel-Rich Lithium Nickel Cobalt Aluminium Oxide–Nanocarbon Core–Shell Cathode: In Operando X-ray Diffraction

2019 ◽  
Vol 11 (34) ◽  
pp. 30719-30727 ◽  
Author(s):  
Selvamani Vadivel ◽  
Nutthaphon Phattharasupakun ◽  
Juthaporn Wutthiprom ◽  
Salatan duangdangchote ◽  
Montree Sawangphruk
Keyword(s):  
High Performance ◽  
Aluminium Oxide ◽  
Core Shell ◽  
Li Ion Batteries ◽  
X Ray Diffraction ◽  
X Ray ◽  
Nickel Cobalt ◽  
Li Ion ◽  
In Operando

scholarly journals In operando X-ray diffraction strain measurement in Ni3Sn2 – Coated inverse opal nanoscaffold anodes for Li-ion batteries

2017 ◽  
Vol 367 ◽  
pp. 80-89 ◽  
Author(s):  
Matthew P.B. Glazer ◽  
Junjie Wang ◽  
Jiung Cho ◽  
Jonathan D. Almer ◽  
John S. Okasinski ◽  
...  
Keyword(s):  
Strain Measurement ◽  
Inverse Opal ◽  
Li Ion Batteries ◽  
X Ray Diffraction ◽  
X Ray ◽  
Li Ion ◽  
In Operando

GISAXS and TOF-GISANS studies on surface and depth morphology of self-organized TiO2nanotube arrays: model anode material in Li-ion batteries

2015 ◽  
Vol 48 (2) ◽  
pp. 444-454 ◽  
Author(s):  
Neelima Paul ◽  
Jassen Brumbarov ◽  
Amitesh Paul ◽  
Ying Chen ◽  
Jean-Francois Moulin ◽  
...  
Keyword(s):  
Anode Material ◽  
Small Angle ◽  
Grazing Incidence ◽  
Nanotube Arrays ◽  
Li Ion Batteries ◽  
X Ray Diffraction ◽  
X Ray ◽  
Self Organized ◽  
Li Ion ◽  
Silicon Coating

Self-organized anodic titania (TiO2) nanotube arrays are an interesting model anode material for use in Li-ion batteries owing to their excellent rate capability, their cycling stability and their enhanced safety compared to graphite. A composite material where carbothermally treated conductive TiO2nanotubes are used as support for a thin silicon film has been shown to have the additional advantage of high lithium storage capacity. This article presents a detailed comparison of the structure, surface and bulk morphology of self-organized conductive TiO2nanotube arrays, with and without silicon coating, using a combination of X-ray diffraction, X-ray reflectivity, grazing-incidence small-angle X-ray scattering (GISAXS) and time-of-flight grazing-incidence small-angle neutron scattering (TOF-GISANS) techniques. X-ray diffraction shows that the nanotubes crystallize in the anatase structure with a preferred (004) orientation. GISAXS and TOF-GISANS are used to study the morphology of the nanotube arrays, delivering values for the inner nanotube radius and intertubular distances with high statistical relevance because of the large probed volume. The analyses reveal the distinct signatures of a prominent lateral correlation of the TiO2nanotubes of ∼94 nm and a nanotube radius of ∼46 nm. The porosity averaged over the entire film using TOF-GISANS is 46%. The inner nanotube radius is reduced to half (∼23 nm) through the silicon coating, but the prominent lateral structure is preserved. Such in-depth morphological investigations over large sample volumes are useful towards development of more efficient battery electrode morphologies.

Probing chemical heterogeneity of Li-ion batteries by in operando high energy X-ray diffraction radiography

2018 ◽  
Vol 403 ◽  
pp. 49-55 ◽  
Author(s):  
M.J. Mühlbauer ◽  
A. Schökel ◽  
M. Etter ◽  
V. Baran ◽  
A. Senyshyn
Keyword(s):  
High Energy ◽  
Chemical Heterogeneity ◽  
Li Ion Batteries ◽  
X Ray Diffraction ◽  
X Ray ◽  
Li Ion ◽  
In Operando

scholarly journals Carbon-Coated SiO2 Composites as Promising Anode Material for Li-Ion Batteries

Molecules ◽  
2021 ◽  
Vol 26 (15) ◽  
pp. 4531
Author(s):  
Mihaela-Ramona Buga ◽  
Adnana Alina Spinu-Zaulet ◽  
Cosmin Giorgian Ungureanu ◽  
Raul-Augustin Mitran ◽  
Eugeniu Vasile ◽  
...  
Keyword(s):  
Anode Material ◽  
Photoelectron Spectroscopy ◽  
Coulombic Efficiency ◽  
Cycling Stability ◽  
Li Ion Batteries ◽  
Transfer Resistance ◽  
Promising Alternative ◽  
X Ray ◽  
Carbon Coated ◽  
Li Ion

Porous silica-based materials are a promising alternative to graphite anodes for Li-ion batteries due to their high theoretical capacity, low discharge potential similar to pure silicon, superior cycling stability compared to silicon, abundance, and environmental friendliness. However, several challenges prevent the practical application of silica anodes, such as low coulombic efficiency and irreversible capacity losses during cycling. The main strategy to tackle the challenges of silica as an anode material has been developed to prepare carbon-coated SiO2 composites by carbonization in argon atmosphere. A facile and eco-friendly method of preparing carbon-coated SiO2 composites using sucrose is reported herein. The carbon-coated SiO2 composites were characterized using X-ray diffraction, X-ray photoelectron spectroscopy, thermogravimetry, transmission and scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy, cyclic voltammetry, and charge–discharge cycling. A C/SiO2-0.085 M calendered electrode displays the best cycling stability, capacity of 714.3 mAh·g−1, and coulombic efficiency as well as the lowest charge transfer resistance over 200 cycles without electrode degradation. The electrochemical performance improvement could be attributed to the positive effect of the carbon thin layer that can effectively diminish interfacial impedance.

Using In Situ High-Energy X-ray Diffraction to Quantify Electrode Behavior of Li-Ion Batteries from Extreme Fast Charging

2021 ◽  
Author(s):  
Partha P. Paul ◽  
Chuntian Cao ◽  
Vivek Thampy ◽  
Hans-Georg Steinrück ◽  
Tanvir R. Tanim ◽  
...  
Keyword(s):  
High Energy ◽  
Li Ion Batteries ◽  
X Ray Diffraction ◽  
X Ray ◽  
Fast Charging ◽  
Li Ion

Phase Transformation Behavior and Stability of LiNiO 2 Cathode Material for Li‐Ion Batteries Obtained from In Situ Gas Analysis and Operando X‐Ray Diffraction

ChemSusChem ◽  
2019 ◽  
Vol 12 (10) ◽  
pp. 2240-2250 ◽  
Author(s):  
Lea de Biasi ◽  
Alexander Schiele ◽  
Maria Roca‐Ayats ◽  
Grecia Garcia ◽  
Torsten Brezesinski ◽  
...  
Keyword(s):  
Phase Transformation ◽  
Cathode Material ◽  
Gas Analysis ◽  
Li Ion Batteries ◽  
X Ray Diffraction ◽  
Transformation Behavior ◽  
X Ray ◽  
Phase Transformation Behavior ◽  
Li Ion

Structural complexity of layered-spinel composite electrodes for Li-ion batteries

2010 ◽  
Vol 25 (8) ◽  
pp. 1601-1616 ◽  
Author(s):  
Jordi Cabana ◽  
Christopher S. Johnson ◽  
Xiao-Qing Yang ◽  
Kyung-Yoon Chung ◽  
Won-Sub Yoon ◽  
...  
Keyword(s):  
Structural Complexity ◽  
Composite Electrodes ◽  
Li Ion Batteries ◽  
X Ray Diffraction ◽  
X Ray ◽  
Different Temperatures ◽  
Li Ion ◽  
Excess Phase ◽  
X Ray Absorption

The complexity of layered-spinel yLi2MnO3·(1 – y)Li1+xMn2–xO4 (Li:Mn = 1.2:1; 0 ≤ x ≤ 0.33; y ≥ 0.45) composites synthesized at different temperatures has been investigated by a combination of x-ray diffraction (XRD), x-ray absorption spectroscopy (XAS), and nuclear magnetic resonance (NMR). While the layered component does not change substantially between samples, an evolution of the spinel component from a high to a low lithium excess phase has been traced with temperature by comparing with data for pure Li1+xMn2–xO4. The changes that occur to the structure of the spinel component and to the average oxidation state of the manganese ions within the composite structure as lithium is electrochemically removed in a battery have been monitored using these techniques, in some cases in situ. Our 6Li NMR results constitute the first direct observation of lithium removal from Li2MnO3 and the formation of LiMnO2 upon lithium reinsertion.

Electrochemical Behavior of LiCo(1-x)MnxO2 Crystalline Powders

2014 ◽  
Vol 895 ◽  
pp. 334-337
Author(s):  
Azira Azahidi ◽  
Norlida Kamarulzaman ◽  
Kelimah Elong ◽  
Nurhanna Badar ◽  
Nurul Atikah Mohd Mokhtar
Keyword(s):  
Partial Substitution ◽  
Li Ion Batteries ◽  
X Ray Diffraction ◽  
Capacity Retention ◽  
X Ray ◽  
Capacity Loss ◽  
Transition Metal Element ◽  
Metal Element ◽  
Li Ion ◽  
Mn Doped

LiCoO2 is a well-known cathode material used in commercial Li-ion batteries but it has its own limitations in terms of cost and toxicity. Improvement of the material by partial substitution of Co with other transition metals is one of the alternative and effective ways to overcome the limitations and improve the electrochemical performance of cathode materials. The transition metal element used for the substitution has to be cheaper and non-toxic thus Mn is chosen here. LiCo(1-x)MnxO2 (x= 0.1, 0.2, 0.3) we synthesized by a novel route using a self-propagating combustion (SPC) method. The samples are analyzed using X-Ray Diffraction (XRD) for phase purity and Field Emission Scanning Electron Microscopy (FESEM) for morphology and particle size studies. The materials obtained are phase pure. In terms of electrochemical activity, though it does not show better first cycle discharge capacity, the Mn doped materials have improved capacity retention. Results showed that LiCo0.9Mn0.1O2 and LiCo0.8Mn0.2O2 exhibited less than 8 % capacity loss in the 20th cycle compared to 12 % for LiCoO2.

Sign in / Sign up

Export Citation Format

Share Document