Characterizing the non-crosslinked aggregation of DNA-modified gold nanoparticles: effects of DNA length and terminal base pair

The Analyst ◽  
2019 ◽  
Vol 144 (18) ◽  
pp. 5580-5588 ◽  
Author(s):  
Kae Sato ◽  
Kazuo Hosokawa ◽  
Mizuo Maeda
Keyword(s):  
Particle Size ◽  
Gold Nanoparticles ◽  
Base Pair ◽  
Electrolyte Concentration ◽  
Probe Length

We investigated the effects of particle size, temperature, electrolyte concentration, and probe length on the non-crosslinked aggregation of DNA-modified GNPs.

Chemical Transformation of Fe, Air & Water to Ammonia: Variation of Reaction Rate with Temperature, Pressure, Alkalinity and Iron

2018 ◽  
Author(s):  
Ping Peng ◽  
Fang-Fang Li ◽  
Xinye Liu ◽  
Jiawen Ren ◽  
jessica stuart ◽  
...  
Keyword(s):  
Particle Size ◽  
Reaction Rate ◽  
Electrolyte Concentration ◽  
Iron Concentration ◽  
Reaction Medium ◽  
Iron Particle ◽  
Intermediate Step ◽  
Ammonia Production ◽  
Pure Nitrogen ◽  
Alkaline Reaction

The rate of ammonia production by the <u>chemical </u>oxidation of iron, N<sub>2</sub>(from air or as pure nitrogen) and water is studied as a function of (1) iron particle size, (2) iron concentration, (3) temperature, (4) pressureand (5) concentration of the alkaline reaction medium. The reaction meduium consists of an aqueous solution of equal molal concentrations of NaOH and KOH (Na<sub>0.5</sub>K<sub>0.5</sub>OH). We had previously reported on the <u>chemical </u>reaction of iron and nitrogen in alkaline medium to ammonia as an intermediate step in the <u>electrochemical </u>synthesis of ammonia by a nano-sized iron oxide electrocatlyst. Here, the intermediate <u>chemical </u>reaction step is exclusively explored. The ammonia production rate increases with temperature (from 20 to 250°C), pressure (from 1 atm to 15 atm of air or N<sub>2</sub>), and exhibits a maximum rate at an electrolyte concentration of 8 molal Na<sub>0,5</sub>K<sub>0,5</sub>OH in a sealed N<sub>2</sub>reactor. 1-3 µm particle size Fe drive the highest observed ammonia production reaction rate. The Fe mass normalized rate of ammonia production increases with decreasing added mass of the Fe reactant reaching a maximum observed rate of 2.2x10<sup>-4</sup>mole of NH<sub>3</sub>h<sup>-1</sup>g<sup>-1</sup>for the reaction of 0.1 g of 1-3 µm Fe in 200°C 8 molal Na<sub>0.5</sub>K<sub>0.5</sub>OH at 15 atm. Under these conditions 5.1 wt% of the iron reacts to form NH<sub>3</sub>via the reaction N<sub>2</sub>+ 2Fe + 3H<sub>2</sub>O ®2NH<sub>3</sub>+ Fe<sub>2</sub>O<sub>3</sub>.

scholarly journals Continuous citrate‐capped gold nanoparticle synthesis in a two‐phase flow reactor

2021 ◽  
Author(s):  
Spyridon Damilos ◽  
Ioannis Alissandratos ◽  
Luca Panariello ◽  
Anand N. P. Radhakrishnan ◽  
Enhong Cao ◽  
...  
Keyword(s):  
Particle Size ◽  
Gold Nanoparticles ◽  
Residence Time ◽  
Flow Reactor ◽  
Phase Flow ◽  
Continuous Manufacturing ◽  
Two Phase ◽  
Process Yield ◽  
Au Nps ◽  
Manufacturing Platform

AbstractA continuous manufacturing platform was developed for the synthesis of aqueous colloidal 10–20 nm gold nanoparticles (Au NPs) in a flow reactor using chloroauric acid, sodium citrate and citric acid at 95 oC and 2.3 bar(a) pressure. The use of a two-phase flow system – using heptane as the continuous phase – prevented fouling on the reactor walls, while improving the residence time distribution. Continuous syntheses for up to 2 h demonstrated its potential application for continuous manufacturing, while live quality control was established using online UV-Vis photospectrometry that monitored the particle size and process yield. The synthesis was stable and reproducible over time for gold precursor concentration above 0.23 mM (after mixing), resulting in average particle size between 12 and 15 nm. A hydrophobic membrane separator provided successful separation of the aqueous and organic phases and collection of colloidal Au NPs in flow. Process yield increased at higher inlet flow rates (from 70 % to almost 100 %), due to lower residence time of the colloidal solution in the separator resulting in less fouling in the PTFE membrane. This study addresses the challenges for the translation of the synthesis from batch to flow and provides tools for the development of a continuous manufacturing platform for gold nanoparticles.Graphical abstract

In vitro permeation of gold nanoparticles through rat skin and rat intestine: Effect of particle size

2008 ◽  
Vol 65 (1) ◽  
pp. 1-10 ◽  
Author(s):  
Ganeshchandra Sonavane ◽  
Keishiro Tomoda ◽  
Akira Sano ◽  
Hiroyuki Ohshima ◽  
Hiroshi Terada ◽  
...  
Keyword(s):  
Particle Size ◽  
Gold Nanoparticles ◽  
Rat Skin ◽  
Rat Intestine ◽  
In Vitro Permeation ◽  
Effect Of Particle Size

Synthesis and Characterization of Water-Soluble Monolayer-Protected Gold Nanoparticles

2011 ◽  
Vol 415-417 ◽  
pp. 617-620 ◽  
Author(s):  
Yan Su ◽  
Ying Yun Lin ◽  
Yu Li Fu ◽  
Fan Qian ◽  
Xiu Pei Yang ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Particle Size ◽  
Gold Nanoparticles ◽  
Average Particle Size ◽  
Water Soluble ◽  
Synthesis And Characterization ◽  
Average Particle ◽  
Transmission Electron

Water-soluble gold nanoparticles (AuNPs) were prepared using 2-mercapto-4-methyl-5- thiazoleacetic acid (MMTA) as a stabilizing agent and sodium borohydride (NaBH4) as a reducing agent. The AuNPs product was analyzed by transmission electron microscopy (TEM), UV-vis absorption spectroscopy and Fourier transform infrared spectroscopy (FTIR). The TEM image shows that the particles were well-dispersed and their average particle size is about 5 nm. The UV-vis absorption and FTIR spectra confirm that the MMTA-AuNPs was stabilized by the carboxylate ions present on the surface of the AuNPs.

scholarly journals Biosynthesized gold nanoparticles-doped hydroxyapatite as antibacterial and antioxidant nanocomposite

2021 ◽  
Author(s):  
Is Fatimah ◽  
Putwi Widya Citradewi ◽  
Amri Yahya ◽  
Bambang Nugroho ◽  
Habibi Hidayat ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Antioxidant Activity ◽  
Particle Size ◽  
Gold Nanoparticles ◽  
Antibacterial Activity ◽  
X Ray Diffraction ◽  
Transmission Electron ◽  
Vis Spectroscopy ◽  
Dpph Scavenging Activity ◽  
Dpph Scavenging

Abstract The composite of green synthesized gold nanoparticles (Au NPs)-doped hydroxyapatite (HA) has been prepared. The gold nanoparticles were produced via bioreduction of HAuCl4 with Clitoria ternatea flower extract, and utilized in the synthesis of hydroxyapatite using Ca(OH)2 and ammonium diphosphate as precursor. The aim of this research is to study the structural analysis of the composite and antibacterial activity test toward Eschericia coli, Staphylococcus aureus, Klebsiela pneumoniae, and Streptococcus pyogenes. In addition, the antioxidant activity was evaluated using 2,2-diphenyl-1-picrylhydrazyl (DPPH) scavenging method. The monitoring of gold nanoparticles formation was conducted by UV–vis spectroscopy and particle size analyses, meanwhile the synthesized composite was studied using X-ray diffraction, scanning electron microscopy, and transmission electron microscopy. The results showed that homogeneously dispersed gold nanoparticles in HA structure was obtained with the particle size ranging at 5-80 nm. The nanocomposite demonstrated antibacterial activity against tested bacteria. The nanocomposite expressed an antioxidant activity as shown by the DPPH scavenging activity of 66 and 58% at the concentration of 100 μg/mL and 50 μg/mL, respectively.

scholarly journals Development of Bio-Functionalized, Raman Responsive, and Potentially Excretable Gold Nanoclusters

Nanomaterials ◽  
2021 ◽  
Vol 11 (9) ◽  
pp. 2181
Author(s):  
Ryan D. Mellor ◽  
Andreas G. Schätzlein ◽  
Ijeoma F. Uchegbu
Keyword(s):  
Particle Size ◽  
Gold Nanoparticles ◽  
Ethylene Glycol ◽  
Gold Nanoclusters ◽  
Physiological Conditions ◽  
Non Invasive ◽  
In Vivo Detection ◽  
Raman Response ◽  
Octadecyl Amine

Gold nanoparticles (AuNPs) are used experimentally for non-invasive in vivo Raman monitoring because they show a strong absorbance in the phototherapeutic window (650–850 nm), a feature that is accompanied by a particle size in excess of 100 nm. However, these AuNPs cannot be used clinically because they are likely to persist in mammalian systems and resist excretion. In this work, clustered ultrasmall (sub-5 nm) AuNP constructs for in vivo Raman diagnostic monitoring, which are also suitable for mammalian excretion, were synthesized and characterized. Sub-5 nm octadecyl amine (ODA)-coated AuNPs were clustered using a labile dithiol linker: ethylene glycol bis-mercaptoacetate (EGBMA). Upon clustering via a controlled reaction and finally coating with a polymeric amphiphile, a strong absorbance in the phototherapeutic window was demonstrated, thus showing the potential suitability of the construct for non-invasive in vivo detection and monitoring. The clusters, when labelled with a biphenyl-4-thiol (BPT) Raman tag, were shown to elicit a specific Raman response in plasma and to disaggregate back to sub-5 nm particles under physiological conditions (37 °C, 0.8 mM glutathione, pH 7.4). These data demonstrate the potential of these new AuNP clusters (Raman NanoTheranostics—RaNT) for in vivo applications while being in the excretable size window.

scholarly journals Gold Nanoparticles Radio-sensitize and Reduce Cell Survival in Lewis Lung Carcinoma

2020 ◽  
Author(s):  
Arvind Pandey ◽  
Veronica Vighetto ◽  
Nicola Di Marzio ◽  
Matteo Hirsch ◽  
Nicola Ferrante ◽  
...  
Keyword(s):  
Dna Damage ◽  
Particle Size ◽  
Gold Nanoparticles ◽  
Cell Survival ◽  
Lung Carcinoma ◽  
Lewis Lung Carcinoma ◽  
Lewis Lung ◽  
Lung Carcinoma Cells ◽  
Reduce Cell Survival

It has been suggested that particle size plays an important role in determining the genotoxicity of gold nanoparticles (GNPs). The purpose of this study was to compare the potential radio-sensitization effects of two different sized GNPs (3.9 and 37.4 nm) fabricated and examined in vitro in Lewis Lung carcinoma (LLC) as a model of non-small cell lung cancer through use of comet and clonogenic assays. After the treatment of 2Gy X-ray irradiation, both particle sizes demonstrated increased DNA damage when compared to treatment with particles only and radiation alone. This radio-sensitization was further translated into a reduction in cell survival demonstrated by clonogenicity. This work indicates that GNPs of both sizes induce DNA damage in LLC cells at the tested concentrations, whereas the 37.4 nm particle size treatment group demonstrated greater significance in vitro. The presented data aids in the evaluation of the radiobiological response of Lewis Lung carcinoma cells treated with gold nanoparticles.

scholarly journals SYNTHESIS AND STABILITY OF RESVERATROL-CONJUGATED GOLD NANOPARTICLES MODIFIED WITH POLYETHYLENE GLYCOL

2020 ◽  
pp. 230-236
Author(s):  
RADITYA ISWANDANA ◽  
RICHA NURSELVIANA ◽  
SUTRIYO SUTRIYO
Keyword(s):  
Particle Size ◽  
Gold Nanoparticles ◽  
Polyethylene Glycol ◽  
Zeta Potential ◽  
High Performance ◽  
Entrapment Efficiency ◽  
Test Results ◽  
Novel Method ◽  
The Stability ◽  
Phosphate Buffered Saline

Objective: Gold nanoparticles (AuNPs) are highly useful for drug delivery, but their application is limited by their stability as they readily aggregate.This issue can be prevented by adding a stabilizing agent such as resveratrol (RSV), which is a polyphenol derived from plants, that is used to preventcancer. Therefore, we propose a novel method to prepare stable RSV-conjugated nanoparticles modified with polyethylene glycol (RSV-AuNP-PEG).Methods: In the first step, the Turkevich method was used to synthesize the AuNPs. Then, PEG was added as stabilizer agent and conjugated with RSV.The synthesized conjugates were characterized using ultraviolet-visible spectrophotometry, Fourier transform infrared spectroscopy, particle sizeanalysis, and high-performance liquid chromatography.Results: The obtained RSV-AuNP-PEG had a particle size of 83.93 nm with a polydispersity index (PDI) of 0.562 and formed a translucent purple-redfluid in solution. The zeta potential was −22.9 mV, and the highest entrapment efficiency was 75.86±0.66%. For comparison, the RSV-AuNP solutionwas purple and turbid, the particle size was 51.97 nm with a PDI of 0.694, and the zeta potential was −24.6 mV. The stability test results showed thatthe storage stability of RSV-AuNP-PEG was better than that of AuNP-RSV. Further, the RSV-AuNP-PEG was shown to be most stable in 2% bovine serumalbumin (BSA) while the AuNP-RSV was most stable in 2% BSA in phosphate-buffered saline pH 7.4.Conclusion: These results show that modification of RSV-conjugated AuNPs with PEG effectively prevents their aggregation in storage, but only incertain mediums.

Size dependent targeted delivery of gold nanoparticles modified with the IL-6R-specific aptamer AIR-3A to IL-6R-carrying cells

Nanoscale ◽  
2017 ◽  
Vol 9 (38) ◽  
pp. 14486-14498 ◽  
Author(s):  
Lisa Prisner ◽  
Nadine Bohn ◽  
Ulrich Hahn ◽  
Alf Mews
Keyword(s):  
Particle Size ◽  
Gold Nanoparticles ◽  
Surface Plasmon Resonance ◽  
Surface Plasmon ◽  
Plasmon Resonance ◽  
Targeted Delivery ◽  
Receptor Ligand ◽  
Size Dependent ◽  
Au Clusters

The receptor–ligand mediated AuNP delivery to cells is strongly dependent on the particle size, as investigated by comparing very small “molecular” Au clusters of only 2 nm with larger 7 nm AuNPs and 36 nm AuNPs with a distinct surface plasmon resonance.

scholarly journals Amplified Single Base-Pair Mismatch Detection via Aggregation of Exonuclease-Sheared Gold Nanoparticles

2014 ◽  
Vol 86 (7) ◽  
pp. 3461-3467 ◽  
Author(s):  
Shuo Wu ◽  
Pingping Liang ◽  
Haixiang Yu ◽  
Xiaowen Xu ◽  
Yuan Liu ◽  
...  
Keyword(s):  
Gold Nanoparticles ◽  
Base Pair ◽  
Single Base ◽  
Mismatch Detection ◽  
Base Pair Mismatch ◽  
Single Base Pair
Sign in / Sign up

Export Citation Format

Share Document