Anion conducting multiblock copolymers with multiple head-groups

2018 ◽  
Vol 6 (19) ◽  
pp. 9000-9008 ◽  
Author(s):  
Lisha Liu ◽  
Garrett Huang ◽  
Paul A. Kohl
Keyword(s):  
Ionic Conductivity ◽  
High Ionic Conductivity ◽  
Head Group ◽  
Multiblock Copolymers ◽  
Alkaline Stability ◽  
Head Groups

Multiblock copolymers with different number of head-group tethers were compared as AEMs for high ionic conductivity and good alkaline stability.

Anion conducting multiblock copolymer membranes with partial fluorination and long head-group tethers

2016 ◽  
Vol 4 (41) ◽  
pp. 16233-16244 ◽  
Author(s):  
Lisha Liu ◽  
John Ahlfield ◽  
Andrew Tricker ◽  
Deryn Chu ◽  
Paul A. Kohl
Keyword(s):  
Ionic Conductivity ◽  
Anion Exchange ◽  
High Ionic Conductivity ◽  
Head Group ◽  
Anion Exchange Membranes ◽  
Multiblock Copolymer ◽  
Alkaline Stability ◽  
Long Head

Multiblock copolymer with long head-group tethers were synthesized as anion exchange membranes with high ionic conductivity and good alkaline stability.

Highly conductive fluorine-based anion exchange membranes with robust alkaline durability

2020 ◽  
Vol 8 (26) ◽  
pp. 13065-13076
Author(s):  
Xue Lang Gao ◽  
Li Xuan Sun ◽  
Hong Yue Wu ◽  
Zhao Yu Zhu ◽  
Nan Xiao ◽  
...  
Keyword(s):  
Fuel Cells ◽  
Ionic Conductivity ◽  
Energy Conversion ◽  
Anion Exchange ◽  
High Ionic Conductivity ◽  
Anion Exchange Membranes ◽  
Alkaline Stability ◽  
Electrochemical Energy Conversion ◽  
Energy Conversion Devices ◽  
Electrochemical Energy

Anion exchange membranes (AEMs) with robust alkaline stability and high ionic conductivity are imminently required for the promising electrochemical energy conversion devices – fuel cells.

Defect-Mediated Conductivity Enhancements in Na3-xPn1-xWxS4 (Pn = P, Sb) using Aliovalent Substitutions

2019 ◽  
Author(s):  
Till Fuchs ◽  
Sean Culver ◽  
Paul Till ◽  
Wolfgang Zeier
Keyword(s):  
Ionic Conductivity ◽  
Vacancy Concentration ◽  
Sodium Ion ◽  
High Ionic Conductivity ◽  
Ionic Conductors ◽  
X Ray Diffraction ◽  
X Ray ◽  
Solid State Batteries ◽  
Ion Conducting ◽  
Very High

<p>The sodium-ion conducting family of Na<sub>3</sub><i>Pn</i>S<sub>4</sub>, with <i>Pn</i> = P, Sb, have gained interest for the use in solid-state batteries due to their high ionic conductivity. However, significant improvements to the conductivity have been hampered by the lack of aliovalent dopants that can introduce vacancies into the structure. Inspired by the need for vacancy introduction into Na<sub>3</sub><i>Pn</i>S<sub>4</sub>, the solid solutions with WS<sub>4</sub><sup>2-</sup> introduction are explored. The influence of the substitution with WS<sub>4</sub><sup>2-</sup> for PS<sub>4</sub><sup>3-</sup> and SbS<sub>4</sub><sup>3-</sup>, respectively, is monitored using a combination of X-ray diffraction, Raman and impedance spectroscopy. With increasing vacancy concentration improvements resulting in a very high ionic conductivity of 13 ± 3 mS·cm<sup>-1</sup> for Na<sub>2.9</sub>P<sub>0.9</sub>W<sub>0.1</sub>S<sub>4</sub> and 41 ± 8 mS·cm<sup>-1</sup> for Na<sub>2.9</sub>Sb<sub>0.9</sub>W<sub>0.1</sub>S<sub>4</sub> can be observed. This work acts as a stepping-stone towards further engineering of ionic conductors using vacancy-injection via aliovalent substituents.</p>

Defect-Mediated Conductivity Enhancements in Na3-xPn1-xWxS4 (Pn = P, Sb) using Aliovalent Substitutions

2019 ◽  
Author(s):  
Till Fuchs ◽  
Sean Culver ◽  
Paul Till ◽  
Wolfgang Zeier
Keyword(s):  
Ionic Conductivity ◽  
Vacancy Concentration ◽  
Sodium Ion ◽  
High Ionic Conductivity ◽  
Ionic Conductors ◽  
X Ray Diffraction ◽  
X Ray ◽  
Solid State Batteries ◽  
Ion Conducting ◽  
Very High

<p>The sodium-ion conducting family of Na<sub>3</sub><i>Pn</i>S<sub>4</sub>, with <i>Pn</i> = P, Sb, have gained interest for the use in solid-state batteries due to their high ionic conductivity. However, significant improvements to the conductivity have been hampered by the lack of aliovalent dopants that can introduce vacancies into the structure. Inspired by the need for vacancy introduction into Na<sub>3</sub><i>Pn</i>S<sub>4</sub>, the solid solutions with WS<sub>4</sub><sup>2-</sup> introduction are explored. The influence of the substitution with WS<sub>4</sub><sup>2-</sup> for PS<sub>4</sub><sup>3-</sup> and SbS<sub>4</sub><sup>3-</sup>, respectively, is monitored using a combination of X-ray diffraction, Raman and impedance spectroscopy. With increasing vacancy concentration improvements resulting in a very high ionic conductivity of 13 ± 3 mS·cm<sup>-1</sup> for Na<sub>2.9</sub>P<sub>0.9</sub>W<sub>0.1</sub>S<sub>4</sub> and 41 ± 8 mS·cm<sup>-1</sup> for Na<sub>2.9</sub>Sb<sub>0.9</sub>W<sub>0.1</sub>S<sub>4</sub> can be observed. This work acts as a stepping-stone towards further engineering of ionic conductors using vacancy-injection via aliovalent substituents.</p>

scholarly journals Dual-Cation Electrolytes Crosslinked with MXene for High-Performance Electrochromic Devices

Nanomaterials ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 874
Author(s):  
Soyoung Bae ◽  
Youngno Kim ◽  
Jeong Min Kim ◽  
Jung Hyun Kim
Keyword(s):  
Ionic Conductivity ◽  
Response Time ◽  
Indium Tin Oxide ◽  
High Performance ◽  
Fast Response ◽  
High Ionic Conductivity ◽  
Electrochromic Device ◽  
Fast Response Time ◽  
Coloration Efficiency ◽  
Conduction Pathway

MXene, a 2D material, is used as a filler to manufacture polymer electrolytes with high ionic conductivity because of its unique sheet shape, large specific surface area and high aspect ratio. Because MXene has numerous -OH groups on its surface, it can cause dehydration and condensation reactions with poly(4-styrenesulfonic acid) (PSSA) and consequently create pathways for the conduction of cations. The movement of Grotthuss-type hydrogen ions along the cation-conduction pathway is promoted and a high ionic conductivity can be obtained. In addition, when electrolytes composed of a conventional acid or metal salt alone is applied to an electrochromic device (ECD), it does not bring out fast response time, high coloration efficiency and transmittance contrast simultaneously. Therefore, dual-cation electrolytes are designed for high-performance ECDs. Bis(trifluoromethylsulfonyl)amine lithium salt (LiTFSI) was used as a source of lithium ions and PSSA crosslinked with MXene was used as a source of protons. Dual-Cation electrolytes crosslinked with MXene was applied to an indium tin oxide-free, all-solution-processable ECD. The effect of applying the electrolyte to the device was verified in terms of response time, coloration efficiency and transmittance contrast. The ECD with a size of 5 × 5 cm2 showed a high transmittance contrast of 66.7%, fast response time (8 s/15 s) and high coloration efficiency of 340.6 cm2/C.

Study on Li0.33La0.55TiO3 Solid Electrolyte with High Ionic Conductivity and Its Application in Flexible All Solid-State Battery

Nanoscale ◽  
2021 ◽  
Author(s):  
Feihu Tan ◽  
Hua An ◽  
Ning Li ◽  
Jun Du ◽  
Zhengchun Peng
Keyword(s):  
Solid State ◽  
Ionic Conductivity ◽  
Solid Electrolyte ◽  
High Ionic Conductivity ◽  
Energy Sources ◽  
Solid State Battery ◽  
Solid State Batteries ◽  
All Solid State Batteries

As flexible all-solid-state batteries are highly safe and lightweight, they can be considered as candidates for wearable energy sources. However, their performance needs to be first improved, which can be...

High Ionic Conductivity of Liquid-Phase-Synthesized Li3PS4 Solid Electrolyte, Comparable to That Obtained via Ball Milling

2021 ◽  
Author(s):  
Kentaro Yamamoto ◽  
Seunghoon Yang ◽  
Masakuni Takahashi ◽  
Koji Ohara ◽  
Tomoki Uchiyama ◽  
...  
Keyword(s):  
Liquid Phase ◽  
Ionic Conductivity ◽  
Solid Electrolyte ◽  
Ball Milling ◽  
High Ionic Conductivity
Sign in / Sign up

Export Citation Format

Share Document