scholarly journals Emergence of the interplay between hierarchy and contact splitting in biological adhesion highlighted through a hierarchical shear lag model

Soft Matter ◽  
2018 ◽  
Vol 14 (26) ◽  
pp. 5509-5518 ◽  
Author(s):  
Lucas Brely ◽  
Federico Bosia ◽  
Nicola M. Pugno
Keyword(s):  
Hierarchical Structure ◽  
Shear Lag ◽  
Shear Lag Model ◽  
Load Redistribution ◽  
Biological Adhesion ◽  
Optimal Load ◽  
The Hierarchical Structure ◽  
Lag Model

A hierarchical shear lag model shows that the hierarchical structure of gecko-like adhesives allows optimal load redistribution.

scholarly journals Stress Transfer from Axially Loaded Fiber to Matrix in a Microcomposite

1994 ◽  
Vol 365 ◽  
Author(s):  
Chun-Hway Hsueh
Keyword(s):  
Analytical Solutions ◽  
Volume Fraction ◽  
Axial Stress ◽  
Stress Transfer ◽  
Radial Dependence ◽  
Shear Lag ◽  
Shear Lag Model ◽  
The Matrix ◽  
Lag Model ◽  
Loaded Fiber

ABSTRACTThe shear lag model has been used extensively to analyze the stress transfer in a singe fiberreinforced composite (i.e., a microcomposite). To achieve analytical solutions, various simplifications have been adopted in the stress analysis. Questions regarding the adequacy of those simplifications are discussed in the present study for the following two cases: bonded interfaces and frictional interfaces. Specifically, simplifications regarding (1) Poisson's effect, and (2) the radial dependences of axial stresses in the fiber and the matrix are addressed. For bonded interfaces, the former can be ignored, and the latter can generally be ignored. However, when the volume fraction of the fiber is high, the radial dependence of the axial stress in the fiber should be considered. For frictional interfaces, the latter can be ignored, but the former should be considered; however, it can be considered in an average sense to simplify the analysis. Comparisons among results obtained from analyses with various simplifications are made.

scholarly journals On the Stress Transfer of Nanoscale Interlayer with Surface Effects

2018 ◽  
Vol 2018 ◽  
pp. 1-9
Author(s):  
Quan Yuan ◽  
Mengjun Wu
Keyword(s):  
Surface Effect ◽  
Surface Elasticity ◽  
Stress Transfer ◽  
Interfacial Stress ◽  
Interlayer Thickness ◽  
Shear Lag ◽  
Multilayered Structures ◽  
Residual Surface Stress ◽  
Shear Lag Model ◽  
Lag Model

An improved shear-lag model is proposed to investigate the mechanism through which the surface effect influences the stress transfer of multilayered structures. The surface effect of the interlayer is characterized in terms of interfacial stress and surface elasticity by using Gurtin–Murdoch elasticity theory. Our calculation result shows that the surface effect influences the efficiency of stress transfer. The surface effect is enhanced with decreasing interlayer thickness and elastic modulus. Nonuniform and large residual surface stress distribution amplifies the influence of the surface effect on stress concentration.

Investigation of Damage in Unidirectional Ceramic Matrix Composites Using a Cohesive-Shear-Lag Model

2001 ◽  
Author(s):  
B. Yang ◽  
S. Mall
Keyword(s):  
Ceramic Matrix Composites ◽  
Ceramic Matrix ◽  
Interfacial Debonding ◽  
Matrix Composites ◽  
Fiber Reinforced ◽  
Shear Lag ◽  
Stress Strain ◽  
Unidirectional Fiber ◽  
Shear Lag Model ◽  
Lag Model

Abstract The present study develops a cohesive-shear-lag model to analyze the cycling stress-strain behavior of unidirectional fiber-reinforced ceramic matrix composites. The model, as a modification to a classical shear-lag model, takes into account matrix cracking, partial interfacial debonding, and partial breakage of fibers. The statistical nature of partial breakage of fibers is modeled by using a cohesive force law. The validity of the model is demonstrated by investigating stress-strain hysteresis loops of a unidirectional fiber-reinforced ceramic-glass matrix composite, SiC/1723. This example demonstrates the capability of the proposed model to characterize damage and deformation mechanisms of ceramic matrix composites under tension-tension cycling loading. The dominant progressive damage mechanism with cycling in this case is shown to be accumulation of fibers breakage, accompanied by increase in interfacial debonding and smoothening of frictional debonded interface.

Dynamic Shear-Lag Model for Stress Transfer in Piezoelectric Transducer Bonded to Plate

AIAA Journal ◽  
2019 ◽  
Vol 57 (5) ◽  
pp. 2123-2133 ◽  
Author(s):  
Santosh Kapuria ◽  
Bhabagrahi Natha Sharma ◽  
A. Arockiarajan
Keyword(s):  
Piezoelectric Transducer ◽  
Stress Transfer ◽  
Dynamic Shear ◽  
Shear Lag ◽  
Shear Lag Model ◽  
Lag Model

Measurements of fracture properties of MWCNTs modified LiNi0.5Mn0.3Co0.2O2 electrodes by a modified shear lag model

2020 ◽  
Vol 781 ◽  
pp. 139223
Author(s):  
Weiguo Mao ◽  
Xiaoxue Zhu ◽  
Zhouqing Zhang ◽  
Huiyu Huang ◽  
Cuiying Dai ◽  
...  
Keyword(s):  
Shear Lag ◽  
Fracture Properties ◽  
Shear Lag Model ◽  
Lag Model
Sign in / Sign up

Export Citation Format

Share Document