scholarly journals High-performance solution-based CdS-conjugated hybrid polymer solar cells

RSC Advances ◽  
2018 ◽  
Vol 8 (32) ◽  
pp. 18051-18058 ◽  
Author(s):  
M. Imran ◽  
M. Ikram ◽  
A. Shahzadi ◽  
S. Dilpazir ◽  
H. Khan ◽  
...  
Keyword(s):  
Quantum Dots ◽  
Solar Cells ◽  
High Performance ◽  
Bulk Heterojunction ◽  
Polymer Solar Cells ◽  
Hybrid Polymer ◽  
Cds Quantum Dots

In this study, hybrid BHJ – bulk heterojunction polymer solar cells were fabricated by incorporating CdS quantum dots (QDs) in a blend of P3HT (donor) and PCBM (acceptor) using dichlorobenzene and chlorobenzene as solvents.

Side chain modification: an effective approach to modulate the energy level of benzodithiophene based polymers for high-performance solar cells

2015 ◽  
Vol 3 (35) ◽  
pp. 18115-18126 ◽  
Author(s):  
Haimei Wu ◽  
Baofeng Zhao ◽  
Weiping Wang ◽  
Zhaoqi Guo ◽  
Wei Wei ◽  
...  
Keyword(s):  
Solar Cells ◽  
Energy Level ◽  
Conjugated Polymers ◽  
Molecular Orbital ◽  
High Performance ◽  
Bulk Heterojunction ◽  
Polymer Solar Cells ◽  
Side Chain ◽  
The Past ◽  
Highest Occupied Molecular Orbital

Over the past few years, it has been proven that deepening the highest occupied molecular orbital (HOMO) levels of conjugated polymers is one of the most successful strategies to develop novel materials for high performance bulk heterojunction polymer solar cells.

scholarly journals Fabrication of Hybrid Polymer Solar Cells By Inverted Structure Based on P3HT:PCBM Active Layer

2017 ◽  
Vol 17 (1) ◽  
pp. 13
Author(s):  
Shobih Shobih ◽  
Rizky Abdillah ◽  
Erlyta Septa Rosa
Keyword(s):  
Solar Cells ◽  
Active Layer ◽  
Bulk Heterojunction ◽  
Polymer Solar Cells ◽  
Short Circuit ◽  
Sol Gel ◽  
Short Circuit Current ◽  
Short Circuit Current Density ◽  
Open Circuit ◽  
Hybrid Polymer

Hybrid polymer solar cell has privilege than its conventional structure, where it usually has structure of (ITO/PEDOT:PSS/Active Layer/Al). In humid environment the PEDOT:PSS will absorb water and hence can easily etch the ITO. Therefore it is necessary to use an alternative method to avoid this drawback and obtain more stable polymer solar cells, namely by using hybrid polymer solar cells structure with an inverted device architecture from the conventional, by reversing the nature of charge collection. In this paper we report the results of the fabrication of inverted bulk heterojunction polymer solar cells based on P3HT:PCBM as active layer, utilizing ZnO interlayer as buffer layer between the ITO and active layer with a stacked structure of ITO/ZnO/P3HT:PCBM/PEDOT:PSS/Ag. The ZnO interlayer is formed through short route, i.e. by dissolving ZnO nanoparticles powder in chloroform-methanol solvent blend rather than by sol-gel process. Based on the measurement results on electrical characteristics of inverted polymer solar cells under 500 W/m2 illumination and AM 1.5 direct filter at room temperature, cell with annealing process of active layer at 110 °C for 10 minutes results in higher cell performance than without annealing, with an open-circuit voltage of 0.21 volt, a short-circuit current density of 1.33 mA/cm2 , a fill factor of 43.1%, and a power conversion efficiency of 0.22%. The low cell’s performance is caused by very rough surface of ZnO interlayer.

scholarly journals High-efficiency photovoltaic cells with wide optical band gap polymers based on fluorinated phenylene-alkoxybenzothiadiazole

2017 ◽  
Vol 10 (6) ◽  
pp. 1443-1455 ◽  
Author(s):  
Seo-Jin Ko ◽  
Quoc Viet Hoang ◽  
Chang Eun Song ◽  
Mohammad Afsar Uddin ◽  
Eunhee Lim ◽  
...  
Keyword(s):  
Solar Cells ◽  
Band Gap ◽  
High Performance ◽  
Optical Band Gap ◽  
High Efficiency ◽  
Bulk Heterojunction ◽  
Polymer Solar Cells ◽  
Photovoltaic Cells ◽  
Wide Band ◽  
Wide Band Gap

A new series of wide band gap photovoltaic polymers based on a fluorinated phenylene-alkoxybenzothiadiazole unit with an optical band gap of over 1.90 eV are designed and utilized for high-performance single- and multi-junction bulk heterojunction polymer solar cells.

Few-layered graphene quantum dots as efficient hole-extraction layer for high-performance polymer solar cells

Nano Energy ◽  
2015 ◽  
Vol 15 ◽  
pp. 186-192 ◽  
Author(s):  
Zicheng Ding ◽  
Zhen Hao ◽  
Bin Meng ◽  
Zhiyuan Xie ◽  
Jun Liu ◽  
...  
Keyword(s):  
Quantum Dots ◽  
Solar Cells ◽  
High Performance ◽  
Polymer Solar Cells ◽  
Graphene Quantum Dots ◽  
High Performance Polymer

scholarly journals Employing PCBTDPP as an Efficient Donor Polymer for High Performance Ternary Polymer Solar Cells

Polymers ◽  
2019 ◽  
Vol 11 (9) ◽  
pp. 1423 ◽  
Author(s):  
Xu ◽  
Saianand ◽  
Roy ◽  
Qiao ◽  
Reza ◽  
...  
Keyword(s):  
Solar Cells ◽  
High Performance ◽  
Bulk Heterojunction ◽  
Polymer Solar Cells ◽  
Power Conversion ◽  
Acid Methyl Ester ◽  
Acid Methyl ◽  
Donor Acceptor ◽  
Butyric Acid Methyl Ester ◽  
Ternary Polymer

A compatible low-bandgap donor polymer (poly[N-90-heptadecanyl-2,7carbazole-alt-3,6-bis(thiophen-5-yl)-2,5-dioctyl-2,5-dihydropyrrolo [3,4] pyrrole-1,4-dione], PCBTDPP) was judicially introduced into the archetypal poly(3-hexylthiophene):[6,6]-phenyl-C61-butyric acid methyl ester (P3HT:PC61BM) photoactive system to fabricate highly efficient ternary based bulk heterojunction polymer solar cells (PSCs). The PCBTDPP ternary-based PSC with optimal loading (0.2 wt.%) displayed outstanding performance with a champion power conversion efficiency (PCE) of 5.28% as compared to the PCE (4.67%) for P3HT:PC61BM-based PSC (reference). The improved PCE for PCBTDPP ternary-based PSC can be mainly attributed to the incorporation of PCBTDPP into P3HT:PC61BM that beneficially improved the optical, morphological, electronic, and photovoltaic (PV) performance. This work instills a rational strategy for identifying components (donor/acceptor (D/A) molecules) with complementary beneficial properties toward fabricating efficient ternary PSCs.

Sign in / Sign up

Export Citation Format

Share Document