Stable copper acetylacetonate-based oxidizing agents in redox (NIR photoactivated) polymerization: an opportunity for the one pot grafting from approach and an example on a 3D printed object

2018 ◽  
Vol 9 (16) ◽  
pp. 2173-2182 ◽  
Author(s):  
Patxi Garra ◽  
Frédéric Dumur ◽  
Malek Nechab ◽  
Fabrice Morlet-Savary ◽  
Céline Dietlin ◽  
...  
Keyword(s):  
Graft Polymerization ◽  
One Pot ◽  
Oxidizing Agents ◽  
Copper Acetylacetonate ◽  
3D Printed ◽  
The One ◽  
Grafting From

Stable Cu(ii) ox. agent for redox (graft) polymerization.

A Series of Metal-Organic Frameworks for Selective CO2 Capture and Catalytic Oxidative Carboxylation of Olefins

2018 ◽  
Author(s):  
Huong T. D. Nguyen ◽  
Y B. N. Tran ◽  
Hung N. Nguyen ◽  
Tranh C. Nguyen ◽  
Felipe Gándara ◽  
...  
Keyword(s):  
Room Temperature ◽  
Gas Adsorption ◽  
New Materials ◽  
One Pot ◽  
Acid Gas ◽  
Naphthalene Diimide ◽  
Styrene Carbonate ◽  
Metal Organic ◽  
Adsorption Of Co ◽  
The One

<p>Three novel lanthanide metal˗organic frameworks (Ln-MOFs), namely MOF-590, -591, and -592 were constructed from a naphthalene diimide tetracarboxylic acid. Gas adsorption measurements of MOF-591 and -592 revealed good adsorption of CO<sub>2</sub> (low pressure, at room temperature) and moderate CO<sub>2</sub> selectivity over N<sub>2</sub> and CH<sub>4</sub>. Accordingly, breakthrough measurements were performed on a representative MOF-592, in which the separation of CO<sub>2</sub> from binary mixture containing N<sub>2</sub> and CO<sub>2</sub> was demonstrated without any loss in performance over three consecutive cycles. Moreover, MOF-590, MOF-591, and MOF-592 exhibited catalytic activity in the one-pot synthesis of styrene carbonate from styrene and CO<sub>2</sub> under mild conditions (1 atm CO<sub>2</sub>, 80 °C, and solvent-free). Among the new materials, MOF-590 revealed a remarkable efficiency with exceptional conversion (96%), selectivity (95%), and yield (91%). </p><br>

A Study on the Rearrangement of Dialkyl 1-Aryl-1-hydroxymethylphosphonates to Benzyl Phosphates

2020 ◽  
Vol 24 (4) ◽  
pp. 465-471 ◽  
Author(s):  
Zita Rádai ◽  
Réka Szabó ◽  
Áron Szigetvári ◽  
Nóra Zsuzsa Kiss ◽  
Zoltán Mucsi ◽  
...  
Keyword(s):  
Quantum Chemical ◽  
Room Temperature ◽  
Phase Transfer ◽  
One Pot ◽  
Substrate Dependence ◽  
Triethylbenzylammonium Chloride ◽  
One Step ◽  
The Pudovik Reaction ◽  
The One ◽  
Solid Liquid

The phospha-Brook rearrangement of dialkyl 1-aryl-1-hydroxymethylphosphonates (HPs) to the corresponding benzyl phosphates (BPs) has been elaborated under solid-liquid phase transfer catalytic conditions. The best procedure involved the use of triethylbenzylammonium chloride as the catalyst and Cs2CO3 as the base in acetonitrile as the solvent at room temperature. The substrate dependence of the rearrangement has been studied, and the mechanism of the transformation under discussion was explored by quantum chemical calculations. The key intermediate is an oxaphosphirane. The one-pot version starting with the Pudovik reaction has also been developed. The conditions of this tandem transformation were the same, as those for the one-step HP→BP conversion.

An Overview of the One-pot Synthesis of Imidazolines

2020 ◽  
Vol 24 (20) ◽  
pp. 2341-2355
Author(s):  
Thaipparambil Aneeja ◽  
Sankaran Radhika ◽  
Mohan Neetha ◽  
Gopinathan Anilkumar
Keyword(s):  
Asymmetric Catalysis ◽  
Organic Compounds ◽  
Ring Opening ◽  
Ecological Impact ◽  
Chiral Auxiliary ◽  
One Pot ◽  
One Pot Synthesis ◽  
The One ◽  
Synthetic Intermediate ◽  
Heterocyclic Moiety

One-pot syntheses are a simple, efficient and easy methodology, which are widely used for the synthesis of organic compounds. Imidazoline is a valuable heterocyclic moiety used as a synthetic intermediate, chiral auxiliary, chiral catalyst and a ligand for asymmetric catalysis. Imidazole is a fundamental unit of biomolecules that can be easily prepared from imidazolines. The one-pot method is an impressive approach to synthesize organic compounds as it minimizes the reaction time, separation procedures, and ecological impact. Many significant one-pot methods such as N-bromosuccinimide mediated reaction, ring-opening of tetrahydrofuran, triflic anhydrate mediated reaction, etc. were reported for imidazoline synthesis. This review describes an overview of the one-pot synthesis of imidazolines and covers literature up to 2020.

Synthesis and Kinetics of Highly Substituted Piperidines in the Presence of Tartaric Acid as a Catalyst

2018 ◽  
Vol 21 (4) ◽  
pp. 302-311
Author(s):  
Younes Ghalandarzehi ◽  
Mehdi Shahraki ◽  
Sayyed M. Habibi-Khorassani
Keyword(s):  
Ambient Temperature ◽  
Tartaric Acid ◽  
Aromatic Aldehydes ◽  
One Pot ◽  
Rate Determining Step ◽  
State Approximation ◽  
Solvent Free Conditions ◽  
Steady State Approximation ◽  
Absorbance Changes ◽  
The One

Aim & Scope: The synthesis of highly substituted piperidine from the one-pot reaction between aromatic aldehydes, anilines and β-ketoesters in the presence of tartaric acid as a catalyst has been investigated in both methanol and ethanol media at ambient temperature. Different conditions of temperature and solvent were employed for calculating the thermodynamic parameters and obtaining an experimental approach to the kinetics and mechanism. Experiments were carried out under different temperature and solvent conditions. Material and Methods: Products were characterized by comparison of physical data with authentic samples and spectroscopic data (IR and NMR). Rate constants are presented as an average of several kinetic runs (at least 6-10) and are reproducible within ± 3%. The overall rate of reaction is followed by monitoring the absorbance changes of the products versus time on a Varian (Model Cary Bio- 300) UV-vis spectrophotometer with a 10 mm light-path cell. Results: The best result was achieved in the presence of 0.075 g (0.1 M) of catalyst and 5 mL methanol at ambient temperature. When the reaction was carried out under solvent-free conditions, the product was obtained in a moderate yield (25%). Methanol was optimized as a desirable solvent in the synthesis of piperidine, nevertheless, ethanol in a kinetic investigation had none effect on the enhancement of the reaction rate than methanol. Based on the spectral data, the overall order of the reaction followed the second order kinetics. The results showed that the first step of the reaction mechanism is a rate determining step. Conclusion: The use of tartaric acid has many advantages such as mild reaction conditions, simple and readily available precursors and inexpensive catalyst. The proposed mechanism was confirmed by experimental results and a steady state approximation.

A Simple Approach to the One-Pot Three Component Synthesis of 4Hpyrimido [2,1-b] benzothiazole Derivatives Using Polyethylene Glycol (PEG-400)

2015 ◽  
Vol 12 (3) ◽  
pp. 197-204 ◽  
Author(s):  
Prabhakar Rairala ◽  
Bandi Yadagiri ◽  
Rajashaker Bantu ◽  
Vijayacharan Guguloth ◽  
Lingaiah Nagarapu
Keyword(s):  
Polyethylene Glycol ◽  
Simple Approach ◽  
One Pot ◽  
Benzothiazole Derivatives ◽  
Peg 400 ◽  
The One

scholarly journals (2S,3R,6R)-2-[(R)-1-Hydroxyallyl]-4,4-dimethoxy-6-methyltetrahydro-2H-pyran-3-ol

Molbank ◽  
10.3390/m1140 ◽  
2020 ◽  
Vol 2020 (2) ◽  
pp. M1140
Author(s):  
Jack Bennett ◽  
Paul Murphy
Keyword(s):  
Mass Spectrometry ◽  
Nmr Spectroscopy ◽  
Ir Spectroscopy ◽  
13C Nmr ◽  
Conjugate Addition ◽  
13C Nmr Spectroscopy ◽  
One Pot ◽  
1H And 13C Nmr ◽  
Esi Mass Spectrometry ◽  
The One

(2S,3R,6R)-2-[(R)-1-Hydroxyallyl]-4,4-dimethoxy-6-methyltetrahydro-2H-pyran-3-ol was isolated in 18% after treating the glucose derived (5R,6S,7R)-5,6,7-tris[(triethylsilyl)oxy]nona-1,8-dien-4-one with (1S)-(+)-10-camphorsulfonic acid (CSA). The one-pot formation of the title compound involved triethylsilyl (TES) removal, alkene isomerization, intramolecular conjugate addition and ketal formation. The compound was characterized by 1H and 13C NMR spectroscopy, ESI mass spectrometry and IR spectroscopy. NMR spectroscopy was used to establish the product structure, including the conformation of its tetrahydropyran ring.

scholarly journals General synthetic strategy for regioselective ultrafast formation of disulfide bonds in peptides and proteins

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Shay Laps ◽  
Fatima Atamleh ◽  
Guy Kamnesky ◽  
Hao Sun ◽  
Ashraf Brik
Keyword(s):  
Drug Discovery ◽  
Disulfide Bonds ◽  
Unsolved Problem ◽  
De Novo ◽  
Therapeutic Potential ◽  
Selective Activation ◽  
One Pot ◽  
Synthetic Strategy ◽  
The One ◽  
Game Changer

AbstractDespite six decades of efforts to synthesize peptides and proteins bearing multiple disulfide bonds, this synthetic challenge remains an unsolved problem in most targets (e.g., knotted mini proteins). Here we show a de novo general synthetic strategy for the ultrafast, high-yielding formation of two and three disulfide bonds in peptides and proteins. We develop an approach based on the combination of a small molecule, ultraviolet-light, and palladium for chemo- and regio-selective activation of cysteine, which enables the one-pot formation of multiple disulfide bonds in various peptides and proteins. We prepare bioactive targets of high therapeutic potential, including conotoxin, RANTES, EETI-II, and plectasin peptides and the linaclotide drug. We anticipate that this strategy will be a game-changer in preparing millions of inaccessible targets for drug discovery.

scholarly journals NIR responsive tumor vaccine in situ for photothermal ablation and chemotherapy to trigger robust antitumor immune responses

2021 ◽  
Vol 19 (1) ◽  
Author(s):  
Lirong Zhang ◽  
Jingjing Zhang ◽  
Lixia Xu ◽  
Zijian Zhuang ◽  
Jingjin Liu ◽  
...  
Keyword(s):  
Immune Responses ◽  
Tumor Vaccine ◽  
Oxidative Polymerization ◽  
Delivery Mode ◽  
Tumor Treatment ◽  
One Pot ◽  
Photothermal Ablation ◽  
Prolonged Retention ◽  
The One

Abstract Background Therapeutic tumor vaccine (TTV) that induces tumor-specific immunity has enormous potentials in tumor treatment, but high heterogeneity and poor immunogenicity of tumor seriously impair its clinical efficacy. Herein, a novel NIR responsive tumor vaccine in situ (HA-PDA@IQ/DOX HG) was prepared by integrating hyaluronic acid functionalized polydopamine nanoparticles (HA-PDA NPs) with immune adjuvants (Imiquimod, IQ) and doxorubicin (DOX) into thermal-sensitive hydrogel. Results HA-PDA@IQ NPs with high photothermal conversion efficiency (41.2%) and T1-relaxation efficiency were using HA as stabilizer by the one-pot oxidative polymerization. Then, HA-PDA@IQ loaded DOX via π-π stacking and mixed with thermal-sensitive hydrogel to form the HA-PDA@IQ/DOX HG. The hydrogel-confined delivery mode endowed HA-PDA@IQ/DOX NPs with multiple photothermal ablation performance once injection upon NIR irradiation due to the prolonged retention in tumor site. More importantly, this mode enabled HA-PDA@IQ/DOX NPs to promote the DC maturation, memory T cells in lymphatic node as well as cytotoxic T lymphocytes in spleen. Conclusion Taken together, the HA-PDA@IQ/DOX HG could be served as a theranostic tumor vaccine for complete photothermal ablation to trigger robust antitumor immune responses.

scholarly journals Clean one-pot multicomponent synthesis of pyrans using a green and magnetically recyclable heterogeneous nanocatalyst

SynOpen ◽  
2021 ◽  
Author(s):  
Mina Ghassemi ◽  
Ali Maleki
Keyword(s):  
Room Temperature ◽  
Significant Loss ◽  
Copper Ferrite ◽  
Multicomponent Synthesis ◽  
Thermo Gravimetric ◽  
Sem Images ◽  
One Pot ◽  
Three Component Reaction ◽  
Ft Ir ◽  
The One

Copper ferrite (CuFe2O4) magnetic nanoparticles (MNPs) were synthesized via thermal decomposition method and applied as a reusable and green catalyst in the synthesis of functionalized 4H-pyran derivatives using malononitrile, an aromatic aldehyde and a β-ketoester in ethanol at room temperature. Then it was characterized by Fourier transform infrared spectroscopy (FT-IR), energy-dispersive X-ray spectroscopy (EDX) analysis, scanning electron microscopy (SEM) images, thermo gravimetric and differential thermo gravimetric (TGA/DTG) analysis. The catalyst was recovered from the reaction mixture by applying an external magnet and decanting the mixture. Recycled catalyst was reused for several times without significant loss in its activity. Running the one-pot three-component reaction at room temperature, no use of eternal energy source and using a green solvent provide benign, mild, and environmentally friendly reaction conditions; as well, ease of catalyst recovering, catalyst recyclability, no use of column chromatography and good to excellent yields are extra advantages of this work.

Sign in / Sign up

Export Citation Format

Share Document