One-step synthesis and assembly of spindle-shaped akaganéite nanoparticles via sonochemistry

CrystEngComm ◽  
2018 ◽  
Vol 20 (21) ◽  
pp. 2989-2995 ◽  
Author(s):  
Weikun Chen ◽  
Pinqiang Dai ◽  
Chunfu Hong ◽  
Chan Zheng ◽  
Weiguo Wang ◽  
...  
Keyword(s):  
Large Scale ◽  
Low Cost ◽  
Scale Production ◽  
Green Method ◽  
Large Scale Production ◽  
One Step

We demonstrate a green method based on sonochemistry for large-scale production of akaganéite nanoparticles and assemblies in low cost.

A Simple and Effective Method for the Preparation of Porous Graphene Nanosheets

2015 ◽  
Vol 719-720 ◽  
pp. 123-126
Author(s):  
Jin Sun ◽  
Qing Zhong Xue ◽  
Yong Gang Du ◽  
Fu Jun Xia ◽  
Qi Kai Guo
Keyword(s):  
Large Scale ◽  
Graphene Nanosheets ◽  
Scale Production ◽  
Green Method ◽  
Porous Graphene ◽  
Large Scale Production ◽  
Potential Applications ◽  
One Step ◽  
Autogenous Pressure ◽  
The One

Porous graphene is a collection of graphene-related materials which exhibits properties distinct from those of graphene, and it has widespread potential applications in various fields. Several approaches have been developed to produce porous graphene. However, the large-scale production of porous graphene nanosheets still remains a great challenge. Moreover, the costs of some methods are prohibitive for its commercial production and the processes are too complicated and time-consuming. In this work, we propose a simple and green method by which graphene nanosheets can be etched by sodium hydroxide under autogenous pressure at 180 °C. The morphologies and surface elements of the porous graphene nanosheets and sizes of pores were characterized. It is demonstrated that the one-step etching of graphene nanosheets is an effective method to obtain large-scale porous graphene nanosheets with high and uniform porosity. The pores in the porous graphene nanosheets were 6 nm depth (the same as the thickness of the graphene nanosheets) and 30-50 nm width.

Microwave-Assisted Controlled Synthesis of CaCO3 with Various Biomimetic Morphologies Using Basic Additives in Polyol

2010 ◽  
Vol 92 ◽  
pp. 139-145
Author(s):  
Ming Guo Ma ◽  
Jian Xin Jiang ◽  
Run Cang Sun
Keyword(s):  
Reaction Temperature ◽  
Large Scale ◽  
Low Cost ◽  
Controlled Synthesis ◽  
Scale Production ◽  
Microwave Assisted ◽  
Large Scale Production ◽  
One Step ◽  
Basic Additive ◽  
Microwave Assisted Method

CaCO3 (aragonite or calcite) with various unusual biomimetic morphologies, such as pumpkin-like, olive-like, willow-leaf-like, cauliflower-like, etc, have been successfully synthesized by one-step microwave-assisted method using CaCl2, (NH4)2CO3 or Na2CO3, basic additives (urea, hexamethylenetetramine ((CH2)6N4), ethylenediamine (C2H8N2) and NaOH), poly(vinylpyrrolidone) (PVP)) in polyol. The effects of reaction temperature, reaction time, and type of basic additive on the products were investigated. The reaction temperature and type of basic additive have significant effects on the morphology of CaCO3. This method is simple, fast, low-cost and may be scaled up for large-scale production of CaCO3 with various morphologies.

scholarly journals A Review on Additive Manufacturing Possibilities for Electrical Machines

Energies ◽  
2021 ◽  
Vol 14 (7) ◽  
pp. 1940
Author(s):  
Muhammad Usman Naseer ◽  
Ants Kallaste ◽  
Bilal Asad ◽  
Toomas Vaimann ◽  
Anton Rassõlkin
Keyword(s):  
Additive Manufacturing ◽  
Large Scale ◽  
Three Dimensional ◽  
Electrical Machines ◽  
Electromagnetic Properties ◽  
Scale Production ◽  
Performance Parameters ◽  
Large Scale Production ◽  
One Step ◽  
Manufacturing Techniques

This paper presents current research trends and prospects of utilizing additive manufacturing (AM) techniques to manufacture electrical machines. Modern-day machine applications require extraordinary performance parameters such as high power-density, integrated functionalities, improved thermal, mechanical & electromagnetic properties. AM offers a higher degree of design flexibility to achieve these performance parameters, which is impossible to realize through conventional manufacturing techniques. AM has a lot to offer in every aspect of machine fabrication, such that from size/weight reduction to the realization of complex geometric designs. However, some practical limitations of existing AM techniques restrict their utilization in large scale production industry. The introduction of three-dimensional asymmetry in machine design is an aspect that can be exploited most with the prevalent level of research in AM. In order to take one step further towards the enablement of large-scale production of AM-built electrical machines, this paper also discusses some machine types which can best utilize existing developments in the field of AM.

scholarly journals Thermoelectric Performance of Mechanically Mixed BixSb2-xTe3—ABS Composites

Materials ◽  
2021 ◽  
Vol 14 (7) ◽  
pp. 1706
Author(s):  
Zacharias Viskadourakis ◽  
Argiri Drymiskianaki ◽  
Vassilis M. Papadakis ◽  
Ioanna Ioannou ◽  
Theodora Kyratsi ◽  
...  
Keyword(s):  
Polymer Composites ◽  
Large Scale ◽  
Low Cost ◽  
Acrylonitrile Butadiene Styrene ◽  
Thermoelectric Performance ◽  
Scale Production ◽  
Bismuth Antimony Telluride ◽  
Mechanical Mixing ◽  
Large Scale Production ◽  
Bi Doping

In the current study, polymer-based composites, consisting of Acrylonitrile Butadiene Styrene (ABS) and Bismuth Antimony Telluride (BixSb2−xTe3), were produced using mechanical mixing and hot pressing. These composites were investigated regarding their electrical resistivity and Seebeck coefficient, with respect to Bi doping and BixSb2-xTe3 loading into the composite. Experimental results showed that their thermoelectric performance is comparable—or even superior, in some cases—to reported thermoelectric polymer composites that have been produced using other complex techniques. Consequently, mechanically mixed polymer-based thermoelectric materials could be an efficient method for low-cost and large-scale production of polymer composites for potential thermoelectric applications.

scholarly journals Extensive Screening of Green Solvents for Safe and Sustainable UiO-66 Synthesis

2020 ◽  
Author(s):  
Diletta Morelli Venturi ◽  
Filippo Campana ◽  
Fabio Marmottini ◽  
Ferdinando Costantino ◽  
Luigi Vaccaro
Keyword(s):  
Large Scale ◽  
Low Cost ◽  
Metal Organic Framework ◽  
Dimethyl Formamide ◽  
Scale Production ◽  
Green Solvents ◽  
High Quality ◽  
Color Code ◽  
Large Scale Production ◽  
Metal Organic

<p>Zirconium based Metal-Organic Framework UiO-66 is to date considered one of the benchmark compound among stable MOFs and it has attracted a huge attention for its employment in many strategic applications. Large scale production of UiO-66 for industrial purposes requires the use of safe and green solvents, fulfilling the green chemistry principles and able to replace the use of <i>N,N</i>-Dimethyl-Formamide (DMF), which, despite its toxicity, is still considered the most efficient solvent for obtaining UiO-66 of high quality. Herein we report on a survey of about 40 different solvents with different polarity, boiling point and acidity, used for the laboratory scale synthesis of high quality UiO-66 crystals. The solvents were chosen according the European REACH Regulation 1907/2006 among those having low cost, low toxicity and fully biodegradable. Concerning MOF synthesis, the relevant parameters chosen for establishing the quality of the results obtained are the degree are the crystallinity, microporosity and specific surface area, yield and solvent recyclability. Taking into account also the chemical physical properties of all the solvents, a color code was assigned in order to give a final green assessment for the UiO-66 synthesis. Defectivity of the obtained products, the use of acidic modulators and the use of alternative Zr-salts have been also taken into consideration. Preliminary results lead to conclude that GVL (γ-valerolactone) is among the most promising solvents for replacing DMF in UiO-66 MOF synthesis. </p>

scholarly journals Low-cost Large Scale Vermicompost Unit

2021 ◽  
Vol 2115 (1) ◽  
pp. 012026
Author(s):  
Sonam Solanki ◽  
Gunendra Mahore
Keyword(s):  
Large Scale ◽  
Low Cost ◽  
Small Scale ◽  
Scale Production ◽  
Key Innovation ◽  
Main Challenge ◽  
Long Run ◽  
Large Scale Production ◽  
Term Maintenance

Abstract In the current process of producing vermicompost on a large-scale, the main challenge is to keep the worms alive. This is achieved by maintaining temperature and moisture in their living medium. It is a difficult task to maintain these parameters throughout the process. Currently, this is achieved by building infrastructure but this method requires a large initial investment and long-run maintenance. Also, these methods are limited to small-scale production. For large-scale production, a unit is developed which utilises natural airflow with water and automation. The main aim of this unit is to provide favourable conditions to worms in large-scale production with very low investment and minimum maintenance in long term. The key innovation of this research is that the technology used in the unit should be practical and easy to adopt by small farmers. For long-term maintenance of the technology lesser number of parts are used.

scholarly journals Extensive Screening of Green Solvents for Safe and Sustainable UiO-66 Synthesis

2020 ◽  
Author(s):  
Diletta Morelli Venturi ◽  
Filippo Campana ◽  
Fabio Marmottini ◽  
Ferdinando Costantino ◽  
Luigi Vaccaro
Keyword(s):  
Large Scale ◽  
Low Cost ◽  
Metal Organic Framework ◽  
Dimethyl Formamide ◽  
Scale Production ◽  
Green Solvents ◽  
High Quality ◽  
Color Code ◽  
Large Scale Production ◽  
Metal Organic

<p>Zirconium based Metal-Organic Framework UiO-66 is to date considered one of the benchmark compound among stable MOFs and it has attracted a huge attention for its employment in many strategic applications. Large scale production of UiO-66 for industrial purposes requires the use of safe and green solvents, fulfilling the green chemistry principles and able to replace the use of <i>N,N</i>-Dimethyl-Formamide (DMF), which, despite its toxicity, is still considered the most efficient solvent for obtaining UiO-66 of high quality. Herein we report on a survey of about 40 different solvents with different polarity, boiling point and acidity, used for the laboratory scale synthesis of high quality UiO-66 crystals. The solvents were chosen according the European REACH Regulation 1907/2006 among those having low cost, low toxicity and fully biodegradable. Concerning MOF synthesis, the relevant parameters chosen for establishing the quality of the results obtained are the degree are the crystallinity, microporosity and specific surface area, yield and solvent recyclability. Taking into account also the chemical physical properties of all the solvents, a color code was assigned in order to give a final green assessment for the UiO-66 synthesis. Defectivity of the obtained products, the use of acidic modulators and the use of alternative Zr-salts have been also taken into consideration. Preliminary results lead to conclude that GVL (γ-valerolactone) is among the most promising solvents for replacing DMF in UiO-66 MOF synthesis. </p>

scholarly journals Efficient Production of l-Ribose with a Recombinant Escherichia coli Biocatalyst

2008 ◽  
Vol 74 (10) ◽  
pp. 2967-2975 ◽  
Author(s):  
Ryan D. Woodyer ◽  
Nathan J. Wymer ◽  
F. Michael Racine ◽  
Shama N. Khan ◽  
Badal C. Saha
Keyword(s):  
Escherichia Coli ◽  
Large Scale ◽  
Active Form ◽  
Apium Graveolens ◽  
Efficient Production ◽  
Scale Production ◽  
Gene Encoding ◽  
Large Scale Production ◽  
One Step ◽  
Rare Sugars

ABSTRACT A new synthetic platform with potential for the production of several rare sugars, with l-ribose as the model target, is described. The gene encoding the unique NAD-dependent mannitol-1-dehydrogenase (MDH) from Apium graveolens (garden celery) was synthetically constructed for optimal expression in Escherichia coli. This MDH enzyme catalyzes the interconversion of several polyols and their l-sugar counterparts, including the conversion of ribitol to l-ribose. Expression of recombinant MDH in the active form was successfully achieved, and one-step purification was demonstrated. Using the created recombinant E. coli strain as a whole-cell catalyst, the synthetic utility was demonstrated for production of l-ribose, and the system was improved using shaken flask experiments. It was determined that addition of 50 to 500 μM ZnCl2 and addition of 5 g/liter glycerol both improved production. The final levels of conversion achieved were >70% at a concentration of 40 g/liter and >50% at a concentration of 100 g/liter. The best conditions determined were then scaled up to a 1-liter fermentation that resulted in 55% conversion of 100 g/liter ribitol in 72 h, for a volumetric productivity of 17.4 g liter−1 day−1. This system represents a significantly improved method for the large-scale production of l-ribose.

Porous micro-spherical LiFePO4/CNT nanocomposite for high-performance Li-ion battery cathode material

RSC Advances ◽  
2015 ◽  
Vol 5 (47) ◽  
pp. 37830-37836 ◽  
Author(s):  
Wei Wei ◽  
Linlin Guo ◽  
Xiaoyang Qiu ◽  
Peng Qu ◽  
Maotian Xu ◽  
...  
Keyword(s):  
Electrochemical Performance ◽  
Cathode Material ◽  
High Performance ◽  
Large Scale ◽  
Low Cost ◽  
Scale Production ◽  
Li Ion Battery ◽  
Excellent Performance ◽  
Large Scale Production ◽  
Li Ion

Although many routes have been developed that can efficiently improve the electrochemical performance of LiFePO4 cathodes, few of them meet the urgent industrial requirements of large-scale production, low cost and excellent performance.

Sign in / Sign up

Export Citation Format

Share Document