Ambient NH3 synthesis via electrochemical reduction of N2 over cubic sub-micron SnO2 particles

2018 ◽  
Vol 54 (92) ◽  
pp. 12966-12969 ◽  
Author(s):  
Ling Zhang ◽  
Xiang Ren ◽  
Yonglan Luo ◽  
Xifeng Shi ◽  
Abdullah M. Asiri ◽  
...  
Keyword(s):  
Electrochemical Reduction ◽  
Carbon Cloth ◽  
Faradaic Efficiency ◽  
Ambient Nh3

Cubic sub-micron SnO2 particles on carbon cloth (SnO2/CC) are active for electrocatalytic N2 reduction, with a large NH3 yield of 1.47 × 10−10 mol s−1 cm−2 and a high Faradaic efficiency of 2.17%.

scholarly journals Oxygen-Deficient WO3/TiO2/CC Nanorod Arrays for Visible-Light Photocatalytic Degradation of Methylene Blue

Catalysts ◽  
2021 ◽  
Vol 11 (11) ◽  
pp. 1349
Author(s):  
Liaochuan Jiang ◽  
Xingyuan Gao ◽  
Shaoling Chen ◽  
Jangam Ashok ◽  
Sibudjing Kawi
Keyword(s):  
Methylene Blue ◽  
Photocatalytic Activity ◽  
Electrochemical Reduction ◽  
Separation Efficiency ◽  
Photogenerated Electron ◽  
Charge Transfer Resistance ◽  
High Photocatalytic Activity ◽  
Carbon Cloth ◽  
Transfer Resistance ◽  
Construction Of Self

At present, TiO2 is one of the most widely used photocatalytic materials. However, the narrow response range to light limits the photocatalytic performance. Herein, we reported a successful construction of self-doped R-WO3/R-TiO2/CC nanocomposites on flexible carbon cloth (CC) via electrochemical reduction to increase the oxygen vacancies (Ovs), resulting in an enhanced separation efficiency of photo-induced charge carriers. The photocurrent of R-WO3/R-TiO2/CC at −1.6 V (vs. SCE) was 2.6 times higher than that of WO3/TiO2/CC, which suggested that Ovs could improve the response to sunlight. Moreover, the photocatalytic activity of R-WO3/TiO2/CC was explored using methylene blue (MB). The degradation rate of MB could reach 68%, which was 1.3 times and 3.8 times higher than that of WO3/TiO2/CC and TiO2/CC, respectively. Furthermore, the solution resistance and charge transfer resistance of R-WO3/R-TiO2/CC were obviously decreased. Therefore, the electrochemical reduction of nanomaterials enabled a promoted separation of photogenerated electron–hole pairs, leading to high photocatalytic activity.

scholarly journals Communication—Partial Oxidation of MnS for Synergistic Electrocatalysis of N2-to-NH3 Fixation at Ambient Conditions

2021 ◽  
Author(s):  
Peiei Li ◽  
Dan Cheng ◽  
Xiaohua Zhu ◽  
Meiling Liu ◽  
Youyu Zhang
Keyword(s):  
Partial Oxidation ◽  
Reduction Reaction ◽  
Ambient Conditions ◽  
Faradaic Efficiency ◽  
Bosch Process ◽  
Ambient Nh3 ◽  
Reaction Performance ◽  
Excellent Selectivity

Abstract Compared with the traditional Haber-Bosch process, electrochemical N2-to-NH3 reduction affords an eco-friendly and sustainable alternative to ambient NH3 synthesis with the aid of efficient electrocatalysts. In this work, partial oxidation of MnS to obtain the MnS-Mn3O4 is proved as a promising noble-free electrocatalysts of N2to NH3 fixation at ambient conditions. When tested in 0.1 M Na2SO4, the electrochemical N2 reduction reaction performance of MnS-Mn3O4 is improved comparing with the MnS, which achieves large NH3 yield of 16.74 μg h–1 mgcat.–1 and a high Faradaic efficiency of 5.72%. It also exhibits excellent selectivity of N2-to-NH3 and strong long-term electrochemical stabil

Facile, cost-effective plasma synthesis of self-supportive FeSx on Fe foam for efficient electrochemical reduction of N2 under ambient conditions

2019 ◽  
Vol 7 (34) ◽  
pp. 19977-19983 ◽  
Author(s):  
Wei Xiong ◽  
Zheng Guo ◽  
Shijun Zhao ◽  
Qian Wang ◽  
Qiyong Xu ◽  
...  
Keyword(s):  
Plasma Treatment ◽  
Electrochemical Reduction ◽  
Production Rate ◽  
Low Cost ◽  
Cost Effective ◽  
Plasma Synthesis ◽  
Ambient Conditions ◽  
Faradaic Efficiency

A non-precious, self-supportive FeSx NRR electrocatalyst was synthesized by a simple H2S-plasma treatment on low-cost Fe foam, which shows a remarkable NH3 production rate of 4.13 × 10−10 mol s−1 cm−2 and a high faradaic efficiency of 17.6%.

Clam-shaped cyclam-functionalized porphyrin for electrochemical reduction of carbon dioxide

2019 ◽  
Vol 23 (04n05) ◽  
pp. 453-461
Author(s):  
Sumana Tawil ◽  
Hathaichanok Seelajaroen ◽  
Amorn Petsom ◽  
Niyazi Serdar Sariciftci ◽  
Patchanita Thamyongkit
Keyword(s):  
Carbon Dioxide ◽  
Carbon Monoxide ◽  
Cyclic Voltammetry ◽  
Catalytic Activity ◽  
Electrochemical Reduction ◽  
Target Compound ◽  
Faradaic Efficiency ◽  
Controlled Potential Electrolysis ◽  
Improved Stability ◽  
Controlled Potential

A clam-shaped molecule comprising a Zn(II)-porphyrin and a Zn(II)-cyclam is synthesized and characterized. Its electrochemical behavior and catalytic activity for homogeneous electrochemical reduction of carbon dioxide (CO[Formula: see text] are investigated by cyclic voltammetry and compared with those of Zn(II)-meso-tetraphenylporphyrin and Zn(II)-cyclam. Under N2-saturated conditions, cyclic voltammetry of the featured complex has characteristics of its two constituents, but under CO2-saturated conditions, the target compound exhibits significant current enhancement. Iterative reduction under electrochemical conditions indicated the target compound has improved stability relative to Zn(II)-cyclam. Controlled potential electrolysis demonstrates that, without addition of water, methane (CH[Formula: see text] is the only detectable product with 1% Faradaic efficiency (FE). The formation of CH4 is not observed under the catalysis of the Zn(II)-porphyrin benchmark compound, indicating that the CO2-capturing function of the Zn(II)-cyclam unit contributes to the catalysis. Upon addition of 3% v/v water, the electrochemical reduction of CO2 in the presence of the target compound gives carbon monoxide (CO) with 28% FE. Dominance of CO formation under these conditions suggests enhancement of proton-coupled reduction. Integrated action of these Zn(II)-porphyrin and Zn(II)-cyclam units offers a notable example of a molecular catalytic system where the cyclam ring captures and brings CO2 into the proximity of the porphyrin catalysis center.

Highly efficient electrochemical ammonia synthesis via nitrogen reduction reactions on a VN nanowire array under ambient conditions

2018 ◽  
Vol 54 (42) ◽  
pp. 5323-5325 ◽  
Author(s):  
Xiaoping Zhang ◽  
Rong-Mei Kong ◽  
Huitong Du ◽  
Lian Xia ◽  
Fengli Qu
Keyword(s):  
High Performance ◽  
Ammonia Synthesis ◽  
Nanowire Array ◽  
Reduction Reaction ◽  
Carbon Cloth ◽  
Ambient Conditions ◽  
Faradaic Efficiency ◽  
Nitrogen Reduction ◽  
Highly Efficient ◽  
High Ammonia

A VN nanowire array on carbon cloth (VN/CC) as a high-performance catalyst for the nitrogen reduction reaction (NRR) affords high ammonia yield (2.48 × 10−10 mol−1 s−1 cm−2) and faradaic efficiency (3.58%) at −0.3 V versus RHE in 0.1 M HCl.

scholarly journals Electrochemical reduction of CO2 to ethylene on Cu/CuxO-GO composites in aqueous solution

RSC Advances ◽  
2020 ◽  
Vol 10 (30) ◽  
pp. 17572-17581
Author(s):  
Nusrat Rashid ◽  
Mohsin Ahmad Bhat ◽  
U. K. Goutam ◽  
Pravin Popinand Ingole
Keyword(s):  
Aqueous Solution ◽  
Graphene Oxide ◽  
Electrochemical Reduction ◽  
Conversion Rate ◽  
Faradaic Efficiency ◽  
Reduction Of Co2

Herein, we present fabrication of graphene oxide supported Cu/CuxO nano-electrodeposits which efficiently and selectively can electroreduce CO2 into ethylene with a faradaic efficiency of 34% and conversion rate of 194 mmol g−1 h−1 at −0.985 V vs. RHE.

Boron and nitrogen dual-doped carbon nanospheres for efficient electrochemical reduction of N2 to NH3

2020 ◽  
Vol 56 (3) ◽  
pp. 446-449 ◽  
Author(s):  
Shenglin Xiao ◽  
Fang Luo ◽  
Hao Hu ◽  
Zehui Yang
Keyword(s):  
Electrochemical Reduction ◽  
Reduction Reaction ◽  
Carbon Nanospheres ◽  
Faradaic Efficiency ◽  
Nitrogen Reduction ◽  
Yield Rate ◽  
Acidic Electrolyte

Boron and nitrogen dual-doped carbon nanospheres show exceptional nitrogen reduction reaction activity, with an NH3 yield rate of 15.7 μgNH3 h−1 mgcat.−1 and Faradaic efficiency of 8.1% at −0.4 V vs. RHE in acidic electrolyte.

Electrocatalytic reduction of CO2to CO with 100% faradaic efficiency by using pyrolyzed zeolitic imidazolate frameworks supported on carbon nanotube networks

2017 ◽  
Vol 5 (47) ◽  
pp. 24867-24873 ◽  
Author(s):  
Ying Guo ◽  
Huijuan Yang ◽  
Xin Zhou ◽  
Kunlong Liu ◽  
Chao Zhang ◽  
...  
Keyword(s):  
Carbon Nanotube ◽  
Electrochemical Reduction ◽  
Electrocatalytic Reduction ◽  
Zeolitic Imidazolate Frameworks ◽  
Faradaic Efficiency ◽  
Carbon Nanotube Networks

100% faradaic efficiency is achieved in electrochemical reduction of CO2to COviacoupling between ZIFs and CNTs.

scholarly journals Low-Overpotential Electrochemical Reduction of CO2 to Formic Acid on Surface-Modified Doped Tin Oxide Pellets

2019 ◽  
Author(s):  
Emmanuel Abdul ◽  
Jason Pitts ◽  
Deepak Rajput ◽  
Shankar Rananavare
Keyword(s):  
Formic Acid ◽  
Electrochemical Reduction ◽  
Current Density ◽  
Tin Oxide ◽  
Aqueous Media ◽  
Oxide Nanoparticles ◽  
Faradaic Efficiency ◽  
Electrode Potentials ◽  
Tin Oxide Nanoparticles ◽  
Reduction Of Co2

Gas sensors fabricated with antimony doped tin oxide (ATO) nanomaterials exhibit remarkable sensitivity for detecting oxidizing and reducing gases. This study highlights the enhanced selectivity and stability of the porous ATO nanomaterial electrode made for electrochemical reduction of CO2 in aqueous media. During electrochemical reduction, these electrodes prepared from compressed powders tend to crumble within a few hours in aqueous media. To overcome this electrode disintegration effect, we modified the surface of the doped tin-Oxide nanoparticles with Nafion and a dipodal silane (1,2-Bis(triethoxysilyl)ethane). The electrode characterization studies include Cyclic Voltammetry (CV), and Electrochemical Impedance Spectroscopy (EIS). Scanning electron microscopic investigation of electrode surface morphology and roughness before and after electrochemical CO2 reduction for derivatized and underivatized electrode revealed lower surface roughness for former than the latter.The derivatized electrodes allowed CO2 electrochemical reduction at low overpotentials and high current density without any electrode crumbling over more than 24 hours of continuous operation. Formate/formic acid and methanol were the major products of reduction at electrode potentials ranging from -0.4 to -1.0V vs. RHE in the CO2 saturated 0.1M KHCO3 electrolyte. Higher current density and Faradaic Efficiency of formic acid was observed when compared to planar tin electrode materials and tin oxide nanoparticles deposited on FTO glass.

scholarly journals Arc Plasma Deposited Copper and Gold Nanoparticles on FTO Substrate for Electrochemical Reduction of CO2

2019 ◽  
Vol 3 (1) ◽  
Keyword(s):  
Gold Nanoparticles ◽  
Formic Acid ◽  
Electrochemical Reduction ◽  
High Efficiency ◽  
Plasma Deposition ◽  
Arc Plasma ◽  
Faradaic Efficiency ◽  
Electro Deposition ◽  
Electro Catalysis ◽  
Reduction Of Co2

A composite of copper and gold nanoparticles was deposited using arc plasma deposition on the conductive FTO substrate for the electrochemical reduction of CO2 . The use of arc plasma deposition system allows the nanoparticles to be implanted onto the substrate as opposed to the commonly used methods of vacuum deposition or electro deposition. This unique structure reduced the CO2 to produce formic acid with up to 60% faradaic efficiency. Copper and gold nanoparticles have never previously been reported to produce formic acid with such high efficiency, suggesting that the co-deposition technique of implanted nanoparticles can provide an interesting future avenue in the field of electrochemical reduction of CO2 . The surface analysis of the electrodes is presented here along with potential dependent faradaic efficiency of the electro catalysis.

Sign in / Sign up

Export Citation Format

Share Document