Ultrahigh electromagnetic interference shielding performance of lightweight, flexible, and highly conductive copper-clad carbon fiber nonwoven fabrics

2017 ◽  
Vol 5 (31) ◽  
pp. 7853-7861 ◽  
Author(s):  
Jinpyo Lee ◽  
Yanan Liu ◽  
Yang Liu ◽  
Soo-Jin Park ◽  
Mira Park ◽  
...  
Keyword(s):  
Carbon Fiber ◽  
Electromagnetic Interference ◽  
Emi Shielding ◽  
Electromagnetic Interference Shielding ◽  
Nonwoven Fabrics

Lightweight, flexible, and highly conductive Cu-clad carbon fiber nonwoven fabrics were developed as superior EMI shielding materialsviafacile and controllable wet-laid and electroless technologies.

Cobaltosic oxide fiber/Carbon Fiber composites fabricated by hydrothermal for improved electromagnetic interference shielding properties

2019 ◽  
Vol 33 (09) ◽  
pp. 1950075
Author(s):  
Ming Gong ◽  
Qiang Li ◽  
Lin Sun ◽  
Ai-Qin Tian ◽  
Shou-Guang Sun
Keyword(s):  
Carbon Fiber ◽  
Electromagnetic Interference ◽  
Fiber Composites ◽  
Interface Strength ◽  
Carbon Fiber Composites ◽  
Emi Shielding ◽  
Electromagnetic Interference Shielding ◽  
Calcination Step ◽  
Cobaltosic Oxide ◽  
Shielding Properties

In this paper, a newly designed composite of magnetic nano-Co3O4 fiber coated on carbon fiber (Cf) is prepared and characterized for the electromagnetic interference (EMI) shielding properties. XRD, SEM and TEM are used to investigate the micromorphology and microstructure evolution during the preparation. By hydrothermal method, the flowerlike clusters of single crystal flake-Co(OH)2 are first obtained on Cf. The firstly prepared Co(OH)2 sheets then turn into Co3O4 fibers during the next calcination step. The continuous and loose coating of magnetic Co3O4 nanofibers is finally obtained on the Cf. The loose coating is in proportion to the weight loss, and the wirelike Co3O4 is good for the interface strength for the Cf composite preparation. Based on the above work, the loose magnetic fibers coating on the Cf could be a feasible composite structure for the EMI composite materials integrated with absorbing and reflecting.

scholarly journals Robust, flexible, and high-performance electromagnetic interference shielding films with long-lasting service

RSC Advances ◽  
2021 ◽  
Vol 11 (30) ◽  
pp. 18476-18482
Author(s):  
Licui Wang ◽  
Zhaoxin Xie ◽  
Yanhu Zhan ◽  
Xuehui Hao ◽  
Yanyan Meng ◽  
...  
Keyword(s):  
Electromagnetic Interference ◽  
High Performance ◽  
Emi Shielding ◽  
Electromagnetic Interference Shielding

It is of great significance for electromagnetic interference (EMI) shielding materials to fulfill long-lasting service requirements.

Interface design of carbon filler/polymer composites for electromagnetic interference shielding

2021 ◽  
Author(s):  
Runxiao Chen ◽  
Rongrong Yu ◽  
Xiaoyuan Pei ◽  
Wei Wang ◽  
Diansen Li ◽  
...  
Keyword(s):  
Polymer Composites ◽  
Electromagnetic Interference ◽  
Interface Design ◽  
Electrical Equipment ◽  
Emi Shielding ◽  
Electromagnetic Interference Shielding ◽  
Carbon Filler ◽  
Portable Electronics ◽  
Electromagnetic Pollution ◽  
Carbon Based

The extensive use of electrical equipment and portable electronics has aroused major concerns about electromagnetic pollution. Carbon-based polymer composites are widely used in the electromagnetic interference (EMI) shielding field, motivated...

Asymmetric Sandwich Structural Cellulose-based Film with Self-supported MXene and AgNW Layers for Flexible Electromagnetic Interference Shielding and Thermal Management

Nanoscale ◽  
2021 ◽  
Author(s):  
Bing Zhou ◽  
Qingtao Li ◽  
Penghui Xu ◽  
Yuezhan Feng ◽  
Jianmin Ma ◽  
...  
Keyword(s):  
Thermal Resistance ◽  
Thermal Management ◽  
Electromagnetic Interference ◽  
High Potential ◽  
Emi Shielding ◽  
Electromagnetic Interference Shielding ◽  
Conductive Films

Flexible cellulose-based conductive films reveal the high potential in electromagnetic interference (EMI) shielding and thermal management applications. However, the high contact electrical/thermal resistance in these films is still one of...

scholarly journals Direct Ink Writing of Highly Conductive MXene Frames for Tunable Electromagnetic Interference Shielding and Electromagnetic Wave-Induced Thermochromism

2021 ◽  
Vol 13 (1) ◽  
Author(s):  
Xinyu Wu ◽  
Tingxiang Tu ◽  
Yang Dai ◽  
Pingping Tang ◽  
Yu Zhang ◽  
...  
Keyword(s):  
Electromagnetic Wave ◽  
Electromagnetic Interference ◽  
High Performance ◽  
Normal Operation ◽  
List Type ◽  
Emi Shielding ◽  
Electromagnetic Interference Shielding ◽  
Direct Ink Writing ◽  
Aluminum Ions ◽  
Wave Induced

Highlights 3D printing of MXene frames with tunable electromagnetic interference shielding efficiency is demonstrated. Highly conductive MXene frames are reinforced by cross-linking with aluminum ions. Electromagnetic wave is visualized by electromagnetic-thermochromic MXene patterns. Abstract The highly integrated and miniaturized next-generation electronic products call for high-performance electromagnetic interference (EMI) shielding materials to assure the normal operation of their closely assembled components. However, the most current techniques are not adequate for the fabrication of shielding materials with programmable structure and controllable shielding efficiency. Herein, we demonstrate the direct ink writing of robust and highly conductive Ti3C2Tx MXene frames with customizable structures by using MXene/AlOOH inks for tunable EMI shielding and electromagnetic wave-induced thermochromism applications. The as-printed frames are reinforced by immersing in AlCl3/HCl solution to remove the electrically insulating AlOOH nanoparticles, as well as cross-link the MXene sheets and fuse the filament interfaces with aluminum ions. After freeze-drying, the resultant robust and porous MXene frames exhibit tunable EMI shielding efficiencies in the range of 25–80 dB with the highest electrical conductivity of 5323 S m−1. Furthermore, an electromagnetic wave-induced thermochromic MXene pattern is assembled by coating and curing with thermochromic polydimethylsiloxane on a printed MXene pattern, and its color can be changed from blue to red under the high-intensity electromagnetic irradiation. This work demonstrates a direct ink printing of customizable EMI frames and patterns for tuning EMI shielding efficiency and visualizing electromagnetic waves.

scholarly journals Lightweight Cellulose/Carbon Fiber Composite Foam for Electromagnetic Interference (EMI) Shielding

Polymers ◽  
2018 ◽  
Vol 10 (12) ◽  
pp. 1319 ◽  
Author(s):  
Ran Li ◽  
Huiping Lin ◽  
Piao Lan ◽  
Jie Gao ◽  
Yan Huang ◽  
...  
Keyword(s):  
Carbon Fiber ◽  
Carbon Fibers ◽  
Electromagnetic Interference ◽  
Fiber Composite ◽  
Carbon Fiber Composites ◽  
Shielding Effectiveness ◽  
Electromagnetic Interference Shielding ◽  
Carbon Fiber Composite ◽  
Foaming Process ◽  
Long Carbon Fibers

Lightweight electromagnetic interference shielding cellulose foam/carbon fiber composites were prepared by blending cellulose foam solution with carbon fibers and then freeze drying. Two kinds of carbon fiber (diameter of 7 μm) with different lengths were used, short carbon fibers (SCF, L/D = 100) and long carbon fibers (LCF, L/D = 300). It was observed that SCFs and LCFs built efficient network structures during the foaming process. Furthermore, the foaming process significantly increased the specific electromagnetic interference shielding effectiveness from 10 to 60 dB. In addition, cellulose/carbon fiber composite foams possessed good mechanical properties and low thermal conductivity of 0.021–0.046 W/(m·K).

scholarly journals A Healable and Mechanically Enhanced Composite with Segregated Conductive Network Structure for High-Efficient Electromagnetic Interference Shielding

2021 ◽  
Vol 13 (1) ◽  
Author(s):  
Ting Wang ◽  
Wei-Wei Kong ◽  
Wan-Cheng Yu ◽  
Jie-Feng Gao ◽  
Kun Dai ◽  
...  
Keyword(s):  
Electromagnetic Interference ◽  
Diels Alder ◽  
Electrostatic Attraction ◽  
List Type ◽  
Shielding Effectiveness ◽  
Emi Shielding ◽  
Electromagnetic Interference Shielding ◽  
Elongation At Break ◽  
High Efficient ◽  
Emi Se

Highlights The cationic waterborne polyurethanes microspheres with Diels-Alder bonds were synthesized for the first time. The electrostatic attraction not only endows the composite with segregated structure to gain high electromagnetic-interference shielding effectiveness, but also greatly enhances mechanical properties. Efficient healing property was realized under heating environment. Abstract It is still challenging for conductive polymer composite-based electromagnetic interference (EMI) shielding materials to achieve long-term stability while maintaining high EMI shielding effectiveness (EMI SE), especially undergoing external mechanical stimuli, such as scratches or large deformations. Herein, an electrostatic assembly strategy is adopted to design a healable and segregated carbon nanotube (CNT)/graphene oxide (GO)/polyurethane (PU) composite with excellent and reliable EMI SE, even bearing complex mechanical condition. The negatively charged CNT/GO hybrid is facilely adsorbed on the surface of positively charged PU microsphere to motivate formation of segregated conductive networks in CNT/GO/PU composite, establishing a high EMI SE of 52.7 dB at only 10 wt% CNT/GO loading. The Diels–Alder bonds in PU microsphere endow the CNT/GO/PU composite suffering three cutting/healing cycles with EMI SE retention up to 90%. Additionally, the electrostatic attraction between CNT/GO hybrid and PU microsphere helps to strong interfacial bonding in the composite, resulting in high tensile strength of 43.1 MPa and elongation at break of 626%. The healing efficiency of elongation at break achieves 95% when the composite endured three cutting/healing cycles. This work demonstrates a novel strategy for developing segregated EMI shielding composite with healable features and excellent mechanical performance and shows great potential in the durable and high precision electrical instruments.

Multifunctional carbon fiber@NiCo/polyimide films with outstanding electromagnetic interference shielding performance

2022 ◽  
Vol 427 ◽  
pp. 131937
Author(s):  
Jianwei Li ◽  
Xuanning Zhang ◽  
Yuanqing Ding ◽  
Shengyao Zhao ◽  
Zhonglei Ma ◽  
...  
Keyword(s):  
Carbon Fiber ◽  
Electromagnetic Interference ◽  
Electromagnetic Interference Shielding ◽  
Polyimide Films

Electromagnetic interference shielding effectiveness of polypyrrole-silver nanocomposite films on silane-modified flexible sheet

2021 ◽  
pp. 095400832110645
Author(s):  
Karim Benzaoui ◽  
Achour Ales ◽  
Ahmed Mekki ◽  
Abdelhalim Zaoui ◽  
Boudjemaa Bouaouina ◽  
...  
Keyword(s):  
Surface Treatment ◽  
Electromagnetic Interference ◽  
Nanocomposite Films ◽  
Electrical Characteristics ◽  
Shielding Effectiveness ◽  
Emi Shielding ◽  
Electromagnetic Interference Shielding ◽  
Silver Nanocomposite ◽  
Electromagnetic Interference Shielding Effectiveness ◽  
Emi Se

The conventional electromagnetic interference (EMI) shielding materials are being gradually replaced by a new generation of supported conducting polymer composites (CPC) films due to their many advantages. This work presents a contribution on the effects of silane surface–modified flexible polypyrrole-silver nanocomposite films on the electromagnetic interference shielding effectiveness (EMI-SE). Thus, the UV-polymerization was used to in-situ deposit the PPy-Ag on the biaxial oriented polyethylene terephthalate (BOPET) flexible substrates whose surfaces were treated by 3-aminopropyltrimethoxysilane (APTMS). X-ray Photoelectron Spectroscopy (XPS) analyzes confirmed the APTMS grafting procedure. Structural, morphological, thermal, and electrical characteristics of the prepared films were correlated to the effect of substrate surface treatment. Thereafter, EMI-SE measurements of the elaborated films were carried out as per ASTM D4935 standard for a wide frequency band extending from 50 MHz to 18 GHz. The obtained results confirmed that the APTMS-treated BOPET film exhibit higher EMI shielding performance and better electrical characteristics compared to the untreated film. In fact, a 32% enhancement of EMI-SE was noted for the treated films compared to the untreated ones. Overall, these results put forward the role played by the surface treatment in strengthening the position of flexible PPy-Ag supported films as high-performance materials in electronic devices and electromagnetic interference shielding applications.

Sign in / Sign up

Export Citation Format

Share Document