Inkjet printing wearable electronic devices

2017 ◽  
Vol 5 (12) ◽  
pp. 2971-2993 ◽  
Author(s):  
Meng Gao ◽  
Lihong Li ◽  
Yanlin Song
Keyword(s):  
Inkjet Printing ◽  
Electronic Devices ◽  
Wearable Electronics ◽  
Recent Advances ◽  
Wearable Electronic ◽  
Wearable Electronic Devices

In this review, the recent advances in inks, strategies, and the applications of inkjet-printed wearable electronics have been summarized.

scholarly journals Fabrication of circuits by multi-nozzle electrohydrodynamic inkjet printing for soft wearable electronics

2021 ◽  
Author(s):  
Arshad Khan ◽  
Khalid Rahman ◽  
Shawkat Ali ◽  
Saleem Khan ◽  
Bo Wang ◽  
...  
Keyword(s):  
Inkjet Printing ◽  
Mechanical Stability ◽  
Thermoplastic Polyurethane ◽  
Electronic Devices ◽  
Human Motion ◽  
Wearable Electronics ◽  
Counter Electrodes ◽  
Electric Circuits ◽  
Wearable Electronic ◽  
Wearable Electronic Devices

Abstract Wearable electronic devices are evolving from current rigid configurations to flexible and ultimately stretchable structures. These emerging systems require soft circuits for connecting the various working units of the overall system. This paper presents fabrication of soft circuits by electrohydrodynamic (EHD) inkjet-printing technique. Multi-nozzle EHD printing head is employed for rapid fabrication of electric circuits on a wide set of materials, including glass substrate (rigid), flexible polyethylene terephthalate (PET) films, and stretchable thermoplastic polyurethane (TPU) films. To avoid the effects of substrate materials on the jettability, the proposed multi-nozzle head is equipped with integrated individual counter electrodes (electrodes are placed above the printing substrate). High-resolution circuits (50 ± 5 µm) with high electrical conductivity (0.6 Ω □−1) on soft substrate materials validate our well-controlled multi-nozzle EHD printing approach. The produced circuits showed excellent flexibility (bending radius ≈ 5 mm radius), high stretchability (strain ≈ 100%), and long-term mechanical stability (500 cycles at 30% strain). The concept is further demonstrated with a soft strain sensor based on a multi-nozzle EHD-printed circuit, employed for monitoring the human motion (finger bending), indicating the potential applications of these circuits in soft wearable electronic devices. Graphic Abstract

Inkjet printing for the fabrication of flexible/stretchable wearable electronic devices and sensors

Sensor Review ◽  
2018 ◽  
Vol 38 (4) ◽  
pp. 438-452 ◽  
Author(s):  
Alaaldeen Al-Halhouli ◽  
Hala Qitouqa ◽  
Abdallah Alashqar ◽  
Jumana Abu-Khalaf
Keyword(s):  
Inkjet Printing ◽  
Electronic Devices ◽  
Wearable Electronic ◽  
Wearable Electronic Devices

Characteristics of Discharge Currents Measured through Body-Attached Metal for Modeling ESD from Wearable Electronic Devices

2016 ◽  
Vol E99.B (1) ◽  
pp. 186-191 ◽  
Author(s):  
Takeshi ISHIDA ◽  
Fengchao XIAO ◽  
Yoshio KAMI ◽  
Osamu FUJIWARA ◽  
Shuichi NITTA
Keyword(s):  
Electronic Devices ◽  
Wearable Electronic ◽  
Wearable Electronic Devices

scholarly journals Recent Progress of Fluxgate Magnetic Sensors: Basic Research and Application

Sensors ◽  
2021 ◽  
Vol 21 (4) ◽  
pp. 1500
Author(s):  
Songrui Wei ◽  
Xiaoqi Liao ◽  
Han Zhang ◽  
Jianhua Pang ◽  
Yan Zhou
Keyword(s):  
Recent Progress ◽  
Electronic Devices ◽  
Basic Research ◽  
Research Direction ◽  
Magnetic Sensor ◽  
Magnetic Sensors ◽  
Future Research ◽  
Calibration Methods ◽  
Wearable Electronic ◽  
Wearable Electronic Devices

Fluxgate magnetic sensors are especially important in detecting weak magnetic fields. The mechanism of a fluxgate magnetic sensor is based on Faraday’s law of electromagnetic induction. The structure of a fluxgate magnetic sensor mainly consists of excitation windings, core and sensing windings, similar to the structure of a transformer. To date, they have been applied to many fields such as geophysics and astro-observations, wearable electronic devices and non-destructive testing. In this review, we report the recent progress in both the basic research and applications of fluxgate magnetic sensors, especially in the past two years. Regarding the basic research, we focus on the progress in lowering the noise, better calibration methods and increasing the sensitivity. Concerning applications, we introduce recent work about fluxgate magnetometers on spacecraft, unmanned aerial vehicles, wearable electronic devices and defect detection in coiled tubing. Based on the above work, we hope that we can have a clearer prospect about the future research direction of fluxgate magnetic sensor.

scholarly journals Foldable and washable textile-based OLEDs with a multi-functional near-room-temperature encapsulation layer for smart e-textiles

2021 ◽  
Vol 5 (1) ◽  
Author(s):  
So Yeong Jeong ◽  
Hye Rin Shim ◽  
Yunha Na ◽  
Ki Suk Kang ◽  
Yongmin Jeon ◽  
...  
Keyword(s):  
Room Temperature ◽  
Wearable Electronics ◽  
Ambient Conditions ◽  
Light Emitting ◽  
Stable Operating ◽  
Mechanical Durability ◽  
Potential Applications ◽  
Wearable Electronic ◽  
Data Signal ◽  
Wearable Electronic Devices

AbstractWearable electronic devices are being developed because of their wide potential applications and user convenience. Among them, wearable organic light emitting diodes (OLEDs) play an important role in visualizing the data signal processed in wearable electronics to humans. In this study, textile-based OLEDs were fabricated and their practical utility was demonstrated. The textile-based OLEDs exhibited a stable operating lifetime under ambient conditions, enough mechanical durability to endure the deformation by the movement of humans, and washability for maintaining its optoelectronic properties even in water condition such as rain, sweat, or washing. In this study, the main technology used to realize this textile-based OLED was multi-functional near-room-temperature encapsulation. The outstanding impermeability of TiO2 film deposited at near-room-temperature was demonstrated. The internal residual stress in the encapsulation layer was controlled, and the device was capped by highly cross-linked hydrophobic polymer film, providing a highly impermeable, mechanically flexible, and waterproof encapsulation.

Engineering flexible carbon nanofibers concatenated MOFs-derived hollow octahedral CoFe2O4 as anode materials for enhanced lithium storage

2021 ◽  
Author(s):  
Fangfang Xue ◽  
Yangyang Li ◽  
Chen Liu ◽  
Zhigang Zhang ◽  
Jun Lin ◽  
...  
Keyword(s):  
Mechanical Property ◽  
Anode Materials ◽  
Electrode Materials ◽  
Electronic Devices ◽  
High Capacity ◽  
Lithium Ion ◽  
Lithium Storage ◽  
Excellent Mechanical Property ◽  
Wearable Electronic ◽  
Wearable Electronic Devices

Constructing suitable electrode materials with high capacity and excellent mechanical property is indispensable for flexible lithium-ion batteries (LIBs) to satisfy the growing flexible and wearable electronic devices. Herein, a necklace-like...

scholarly journals Textile-Based Triboelectric Nanogenerators for Wearable Self-Powered Microsystems

Micromachines ◽  
2021 ◽  
Vol 12 (2) ◽  
pp. 158
Author(s):  
Peng Huang ◽  
Dan-Liang Wen ◽  
Yu Qiu ◽  
Ming-Hong Yang ◽  
Cheng Tu ◽  
...  
Keyword(s):  
Rapid Development ◽  
Electronic Devices ◽  
Quantitative Relationship ◽  
Triboelectric Nanogenerator ◽  
Output Performance ◽  
Integrated Microsystems ◽  
Wearable Electronic ◽  
Self Powered ◽  
Representative Work ◽  
Wearable Electronic Devices

In recent years, wearable electronic devices have made considerable progress thanks to the rapid development of the Internet of Things. However, even though some of them have preliminarily achieved miniaturization and wearability, the drawbacks of frequent charging and physical rigidity of conventional lithium batteries, which are currently the most commonly used power source of wearable electronic devices, have become technical bottlenecks that need to be broken through urgently. In order to address the above challenges, the technology based on triboelectric effect, i.e., triboelectric nanogenerator (TENG), is proposed to harvest energy from ambient environment and considered as one of the most promising methods to integrate with functional electronic devices to form wearable self-powered microsystems. Benefited from excellent flexibility, high output performance, no materials limitation, and a quantitative relationship between environmental stimulation inputs and corresponding electrical outputs, TENGs present great advantages in wearable energy harvesting, active sensing, and driving actuators. Furthermore, combined with the superiorities of TENGs and fabrics, textile-based TENGs (T-TENGs) possess remarkable breathability and better non-planar surface adaptability, which are more conducive to the integrated wearable electronic devices and attract considerable attention. Herein, for the purpose of advancing the development of wearable electronic devices, this article reviews the recent development in materials for the construction of T-TENGs and methods for the enhancement of electrical output performance. More importantly, this article mainly focuses on the recent representative work, in which T-TENGs-based active sensors, T-TENGs-based self-driven actuators, and T-TENGs-based self-powered microsystems are studied. In addition, this paper summarizes the critical challenges and future opportunities of T-TENG-based wearable integrated microsystems.

Mortality of people over working age in the context of COVID-19 pandemic

2022 ◽  
pp. 961-968
Author(s):  
Т.П. Сабгайда ◽  
А.Н. Эделева
Keyword(s):  
Information Technologies ◽  
Electronic Devices ◽  
Social Assistance ◽  
Small Scale ◽  
New Information ◽  
Exogenous Stress ◽  
Working Age ◽  
Wearable Electronic ◽  
Wearable Electronic Devices ◽  
Death Causes

Проанализирована смертность лиц старше трудоспособного возраста (женщины 55+ и мужчины 60+) в условиях пандемии COVID-19 для определения потенциальной возможности её предотвращения. Использовали информацию базы данных РФС-ЕМИАС Москвы за 2019, 2020 и 2021 гг. (за периоды до 15 июня). Сделано заключение, что на фоне более корректного учета причин смерти в 2021 г., связанных с инфицированием вирусом SARS-CoV-2, вклад психических расстройств и болезней эндокринной системы в структуру причин смерти лиц старше трудоспособного возраста без учета случаев смерти от COVID-19 превышает показатели 2019 г. Рост смертности от заболеваний этих классов в значительной степени является следствием экзогенного стресса, связанного с пандемией, изоляцией лиц 65 лет и старше в начале пандемии, снижением эффективности их медико-социальной поддержки. Недостатки в организации социальной помощи лицам старших возрастных групп, слабое внедрение новых информационных технологий и носимых электронных устройств в практическую работу здравоохранения, малые масштабы общественных инициатив в области социальной помощи привели к потерям населения, которые могли бы быть предотвращены в период пандемии. The mortality of people over working age (women 55+ and men 60+) was analyzed in the context of COVID-19 pandemic in order to determine the potential for its prevention. The information from the Moscow mortality database for 2019, 2020 and 2021 (up to June 15) was used. Against the background of more correct accounting of death causes associated with SARS-CoV-2 virus infection in 2021, the contributions of mental disorders and endocrine diseases to the structure of death causes (excluding deaths from COVID-19) for people over working age are more than in 2019. The increase in mortality from diseases of these classes is largely a consequence of exogenous stress associated with a pandemic, isolation of people older 64 years and a decrease in the effectiveness of medical care. It was concluded that indirect losses from COVID-19 include avoidable mortality of elderly caused by shortcomings in organization of social assistance for them, the weak introduction of new information technologies and wearable electronic devices into the practical work of health care, small scale of public initiatives in the field of social assistance.

Sign in / Sign up

Export Citation Format

Share Document