Boosting the energy efficiency and power performance of neutral aqueous organic redox flow batteries

2017 ◽  
Vol 5 (42) ◽  
pp. 22137-22145 ◽  
Author(s):  
Bo Hu ◽  
Christopher Seefeldt ◽  
Camden DeBruler ◽  
T. Leo Liu
Keyword(s):  
Energy Efficiency ◽  
Power Density ◽  
Redox Flow Battery ◽  
Power Performance ◽  
Flow Battery ◽  
Redox Flow Batteries ◽  
Flow Batteries

A neutral aqueous organic redox flow battery demonstrated an unprecedented 79% energy efficiency at 60 mA cm−2 and 122.7 mW cm−2 power density.

Improved radical stability of viologen anolytes in aqueous organic redox flow batteries

2018 ◽  
Vol 54 (50) ◽  
pp. 6871-6874 ◽  
Author(s):  
Bo Hu ◽  
Yijie Tang ◽  
Jian Luo ◽  
Grant Grove ◽  
Yisong Guo ◽  
...  
Keyword(s):  
Power Density ◽  
Redox Flow Battery ◽  
Flow Battery ◽  
Capacity Retention ◽  
Redox Flow Batteries ◽  
Flow Batteries

A 1.38 V aqueous organic redox flow battery demonstrated 97.48% capacity retention for 500 cycles and 128 mW cm−2 power density.

An Energy Dense, Robust, Powerful Bipolar Zinc-Ferrocene Redox Flow Battery

2020 ◽  
Author(s):  
Jian Luo ◽  
Bo Hu ◽  
Wenda Wu ◽  
Maowei Hu ◽  
Leo Liu
Keyword(s):  
Energy Storage ◽  
Energy Density ◽  
Low Cost ◽  
High Energy ◽  
High Energy Density ◽  
Redox Flow Battery ◽  
Power Performance ◽  
Flow Battery ◽  
Redox Flow Batteries ◽  
Flow Batteries

Redox flow batteries (RFBs) have been recognized as a promising option for scalable and dispatchable renewable energy storage (e.g. solar and wind energy). Zinc metal represents a low cost, high capacity anode material to develop high energy density aqueous redox flow batteries. However, the energy storage applications of traditional inorganic Zn halide flow batteries are primarily plagued by the material challenges of traditional halide cathode electrolytes (e.g. bromine) including corrosion, toxicity, and severe crossover. As reported here, we have developed a bipolar Zinc-ferrocene salt compound, Zinc 1,1’-bis(3-sulfonatopropyl)ferrocene, Zn[Fc(SPr)2] (1.80 M solubility or 48.2 Ah/L charge storage capacity) – a robust, energy-dense, bipolar redox-active electrolyte material for high performance Zn organic RFBs. Using a low-cost porous Daramic membrane, the Zn[Fc(SPr)2] aqueous organic redox flow battery (AORFB) has worked in dual-flow and single-flow modes. It has manifested outstanding current, energy, and power performance, specifically, operating at high current densities of up to 200 mA/cm2 and delivering an energy efficiency of up to 81.5% and a power density of up to 270.5 mW/cm2. A Zn[Fc(SPr)2] AORFB demonstrated an energy density of 20.2 Wh/L and displayed 100% capacity retention for 2000 cycles (1284 hr or 53.5 days). The Zn[Fc(SPr)2] ionic bipolar electrolyte not only offers record-setting, highly-stable, energy-dense, and the most powerful Zn-organic AORFBs to date, but it also provides a new paradigm to develop even more advanced redox materials for scalable energy storage.

Synthesis and investigation of imidazolium functionalized poly(arylene ether sulfone)s as anion exchange membranes for all-vanadium redox flow batteries

RSC Advances ◽  
2016 ◽  
Vol 6 (8) ◽  
pp. 6029-6037 ◽  
Author(s):  
Di Lu ◽  
Lele Wen ◽  
Feng Nie ◽  
Lixin Xue
Keyword(s):  
Anion Exchange ◽  
Vanadium Redox Flow Battery ◽  
Anion Exchange Membranes ◽  
Redox Flow Battery ◽  
Flow Battery ◽  
Redox Flow Batteries ◽  
Arylene Ether ◽  
Flow Batteries ◽  
Vanadium Redox

A serials of imidazolium functionalized poly(arylene ether sulfone) as anion exchange membranes (AEMs) for all-vanadium redox flow battery (VRB) application are synthesized successfully in this study.

scholarly journals Electrochemical Studies on Alizarin Red S as Negolyte for Redox Flow Battery: a Preliminary Study

2018 ◽  
Vol 7 (4.35) ◽  
pp. 375
Author(s):  
C. Khor ◽  
M. R. Mohamed ◽  
C. K. Feng ◽  
P. K. Leung
Keyword(s):  
Diffusion Coefficient ◽  
Negative Electrode ◽  
Operating Conditions ◽  
Alizarin Red S ◽  
Fast Diffusion ◽  
Redox Flow Battery ◽  
Flow Battery ◽  
Alizarin Red ◽  
Redox Flow Batteries ◽  
Flow Batteries

Redox flow battery (RFB) has received tremendous attention as energy storage system coupled with renewable energy sources. In this paper, a low-cost alizarin red S (ARS) organic dye is proposed to serve as the active material for the negative electrode reaction for organic redox flow batteries. Cyclic voltammetry has been conducted under a number of operating conditions to reveal the electrochemical performance of this molecule. The results suggest that ARS is highly reversible at low electrode potential (c.a. 0.082 V vs. standard hydrogen electrode), indicating that ARS is a promising negative electrode material for organic redox flow batteries. The diffusion coefficient of ARS is calculated in the range of 6.424 x 10-4 cm2 s-1, This has indicated fast diffusion rate and electrochemical kinetics for oxidation and reduction in higher concentration of ARS. It has been found out that the higher concentration of ARS in base electrolyte cause lowest diffusion coefficient due to solubility issue of ARS.

Functionalised carbazole as a cathode for high voltage non-aqueous organic redox flow batteries

2020 ◽  
Vol 44 (34) ◽  
pp. 14401-14410
Author(s):  
Chinmaya R. Mirle ◽  
Raja M. ◽  
Vasudevarao P. ◽  
Sankararaman S. ◽  
Kothandaraman R.
Keyword(s):  
High Voltage ◽  
Cathode Materials ◽  
Reduction Potential ◽  
Redox Flow Battery ◽  
Flow Battery ◽  
Redox Flow Batteries ◽  
Flow Batteries ◽  
High Reduction

Prospective high reduction potential cathode materials have been proposed that can be used in non-aqueous redox flow battery applications.

NiMoO4 nanorods with rich catalytic sites as superb electrocatalyst for cerium-based flow battery

2021 ◽  
Author(s):  
Xian Xie ◽  
Chung Yim Chan ◽  
Walid A Daoud
Keyword(s):  
Energy Efficiency ◽  
Power Density ◽  
Current Density ◽  
Cell Voltage ◽  
Redox Flow Battery ◽  
Flow Battery ◽  
Higher Power ◽  
Catalytic Sites

Higher cell voltage, current density and voltage efficiency are desired in redox flow battery (RFB) to enable the cell to achieve higher power density and energy efficiency. Cerium-vanadium flow battery...

scholarly journals Segmented Printed Circuit Board Electrode for Locally-resolved Current Density Measurements in All-Vanadium Redox Flow Batteries

Batteries ◽  
2019 ◽  
Vol 5 (2) ◽  
pp. 38 ◽  
Author(s):  
Gerber ◽  
Fischer ◽  
Pinkwart ◽  
Tübke
Keyword(s):  
Current Density ◽  
Printed Circuit Board ◽  
Current Density Distribution ◽  
Circuit Board ◽  
Redox Flow Battery ◽  
Flow Battery ◽  
Printed Circuit ◽  
Redox Flow Batteries ◽  
Flow Batteries ◽  
Vanadium Redox

One of the most important parameters for the design of redox flow batteries is a uniform distribution of the electrolyte solution over the complete electrode area. The performance of redox flow batteries is usually investigated by general measurements of the cell in systematic experimental studies such as galvanostatic charge-discharge cycling. Local inhomogeneity within the electrode cannot be locally-resolved. In this study a printed circuit board (PCB) with a segmented current collector was integrated into a 40 cm2 all-vanadium redox flow battery to analyze the locally-resolved current density distribution of the graphite felt electrode. Current density distribution during charging and discharging of the redox flow battery indicated different limiting influences. The local current density in redox flow batteries mainly depends on the transport of the electrolyte solution. Due to this correlation, the electrolyte flow in the porous electrode can be visualized. A PCB electrode can easily be integrated into the flow battery and can be scaled to nearly any size of the electrode area. The carbon coating of the PCB enables direct contact to the corrosive electrolyte, whereby the sensitivity of the measurement method is increased compared to state-of-the-art methods.

A novel amphoteric ion-exchange membrane prepared by the pore-filling technique for vanadium redox flow batteries

RSC Advances ◽  
2016 ◽  
Vol 6 (67) ◽  
pp. 63023-63029 ◽  
Author(s):  
M. S. Lee ◽  
H. G. Kang ◽  
J. D. Jeon ◽  
Y. W. Choi ◽  
Y. G. Yoon
Keyword(s):  
Ion Exchange ◽  
Ion Exchange Membrane ◽  
Vanadium Redox Flow Battery ◽  
Redox Flow Battery ◽  
Flow Battery ◽  
Pore Filling ◽  
Redox Flow Batteries ◽  
Flow Batteries ◽  
Exchange Membrane ◽  
Vanadium Redox

A novel amphoteric ion-exchange membrane (AIEM) was prepared through the pore-filling technique, for vanadium redox flow battery (VRBs) applications.

scholarly journals High energy density electrolytes for H2/Br2 redox flow batteries, their polybromide composition and influence on battery cycling limits

RSC Advances ◽  
2021 ◽  
Vol 11 (9) ◽  
pp. 5218-5229
Author(s):  
Michael Küttinger ◽  
Jakub K. Wlodarczyk ◽  
Daniela Daubner ◽  
Peter Fischer ◽  
Jens Tübke
Keyword(s):  
Energy Density ◽  
High Energy ◽  
High Energy Density ◽  
Redox Flow Battery ◽  
Flow Battery ◽  
Redox Flow Batteries ◽  
Flow Batteries ◽  
First Time

Polybromides formation in aqueous bromine electrolytes and influence on H2/Br2 redox flow battery performance is investigated the first time.

Sign in / Sign up

Export Citation Format

Share Document