scholarly journals Self-assembly of a nano hydrogel colloidal array for the sensing of humidity

RSC Advances ◽  
2018 ◽  
Vol 8 (18) ◽  
pp. 9963-9969 ◽  
Author(s):  
Zhe Wang ◽  
Min Xue ◽  
Herong Zhang ◽  
Zihui Meng ◽  
Kenneth J. Shea ◽  
...  
Keyword(s):  
Self Assembly ◽  
Humidity Sensor ◽  
Low Cost ◽  
Three Dimensional ◽  
Humidity Sensing ◽  
Self Assembled

A simple and low-cost humidity sensor based on self-assembled three dimensional nanohydrogel colloidal array was prepared for humidity sensing.

Nanoscale Self-Assembly Using Ion and Electron Beam Techniques: A Rapid Review

MRS Advances ◽  
2020 ◽  
Vol 5 (64) ◽  
pp. 3507-3520
Author(s):  
Chunhui Dai ◽  
Kriti Agarwal ◽  
Jeong-Hyun Cho
Keyword(s):  
Electron Beam ◽  
Self Assembly ◽  
Ion Beam ◽  
Three Dimensional ◽  
The Self ◽  
Stress Generation ◽  
Rapid Review ◽  
High Yield ◽  
3D Nanostructures ◽  
Self Assembled

AbstractNanoscale self-assembly, as a technique to transform two-dimensional (2D) planar patterns into three-dimensional (3D) nanoscale architectures, has achieved tremendous success in the past decade. However, an assembly process at nanoscale is easily affected by small unavoidable variations in sample conditions and reaction environment, resulting in a low yield. Recently, in-situ monitored self-assembly based on ion and electron irradiation has stood out as a promising candidate to overcome this limitation. The usage of ion and electron beam allows stress generation and real-time observation simultaneously, which significantly enhances the controllability of self-assembly. This enables the realization of various complex 3D nanostructures with a high yield. The additional dimension of the self-assembled 3D nanostructures opens the possibility to explore novel properties that cannot be demonstrated in 2D planar patterns. Here, we present a rapid review on the recent achievements and challenges in nanoscale self-assembly using electron and ion beam techniques, followed by a discussion of the novel optical properties achieved in the self-assembled 3D nanostructures.

Self-assembled three-dimensional hierarchical graphene hybrid hydrogels with ultrathin β-MnO2 nanobelts for high performance supercapacitors

2015 ◽  
Vol 3 (4) ◽  
pp. 1540-1548 ◽  
Author(s):  
Sheng Zhu ◽  
Hui Zhang ◽  
Ping Chen ◽  
Lin-Hui Nie ◽  
Chuan-Hao Li ◽  
...  
Keyword(s):  
Self Assembly ◽  
High Performance ◽  
Three Dimensional ◽  
The Self ◽  
Mass Loading ◽  
Hybrid Hydrogel ◽  
Precise Control ◽  
Ultrafine Structure ◽  
Hybrid Hydrogels ◽  
Self Assembled

A facile protocol for the self-assembly of the rGO/β-MnO2 hybrid hydrogel with ultrafine structure and precise control of mass-loading for high performance supercapacitors is reported.

Square-grid coordination networks of (5,10,15,20-tetra-4-pyridylporphyrinato)zinc(II) in its clathrate with two guest molecules of 1,2-dichlorobenzene: supramolecular isomerism of the porphyrin self-assembly

2009 ◽  
Vol 65 (3) ◽  
pp. m139-m142 ◽  
Author(s):  
Rajesh Koner ◽  
Israel Goldberg
Keyword(s):  
Self Assembly ◽  
Metal Ion ◽  
Three Dimensional ◽  
Two Dimensional ◽  
Coordination Networks ◽  
Guest Molecules ◽  
Square Grid ◽  
Supramolecular Isomerism ◽  
Self Assembled ◽  
Solvent Molecules

The title compound, (5,10,15,20-tetra-4-pyridylporphyrinato)zinc(II) 1,2-dichlorobenzene disolvate, [Zn(C40H24N8)]·2C6H4Cl2, contains a clathrate-type structure. It is composed of two-dimensional square-grid coordination networks of the self-assembled porphyrin moiety, which are stacked one on top of the other in a parallel manner. The interporphyrin cavities of the overlapping networks combine into channel voids accommodated by the dichlorobenzene solvent. Molecules of the porphyrin complex are located on crystallographic inversion centres. The observed two-dimensional assembly mode of the porphyrin units represents a supramolecular isomer of the unique three-dimensional coordination frameworks of the same porphyrin building block observed earlier. The significance of this study lies in the discovery of an additional supramolecular isomer of the rarely observed structures of metalloporphyrins self-assembled directly into extended coordination polymers without the use of external ligand or metal ion auxiliaries.

scholarly journals Microribbons composed of directionally self-assembled nanoflakes as highly stretchable ionic neural electrodes

2020 ◽  
Vol 117 (26) ◽  
pp. 14667-14675 ◽  
Author(s):  
Mingchao Zhang ◽  
Rui Guo ◽  
Ke Chen ◽  
Yiliang Wang ◽  
Jiali Niu ◽  
...  
Keyword(s):  
Self Assembly ◽  
Structural Variation ◽  
Three Dimensional ◽  
Biological Tissues ◽  
Superior Performance ◽  
Ionic Conductors ◽  
Structural Variations ◽  
Neural Electrodes ◽  
Self Assembled

Many natural materials possess built-in structural variation, endowing them with superior performance. However, it is challenging to realize programmable structural variation in self-assembled synthetic materials since self-assembly processes usually generate uniform and ordered structures. Here, we report the formation of asymmetric microribbons composed of directionally self-assembled two-dimensional nanoflakes in a polymeric matrix during three-dimensional direct-ink printing. The printed ribbons with embedded structural variations show site-specific variance in their mechanical properties. Remarkably, the ribbons can spontaneously transform into ultrastretchable springs with controllable helical architecture upon stimulation. Such springs also exhibit superior nanoscale transport behavior as nanofluidic ionic conductors under even ultralarge tensile strains (>1,000%). Furthermore, to show possible real-world uses of such materials, we demonstrate in vivo neural recording and stimulation using such springs in a bullfrog animal model. Thus, such springs can be used as neural electrodes compatible with soft and dynamic biological tissues.

Self-Assembly of Proteins into Three-Dimensional Structures Using Bio-Conjugation

2014 ◽  
Vol 1663 ◽  
Author(s):  
Garima Thakur ◽  
Kovur Prashanthi ◽  
Thomas Thundat
Keyword(s):  
Self Assembly ◽  
Three Dimensional ◽  
Gold Surface ◽  
Building Blocks ◽  
Growth Conditions ◽  
Base Layer ◽  
Chemical Structures ◽  
Molecular Building Blocks ◽  
Ring Structures ◽  
Self Assembled

ABSTRACTSelf–assembly of molecular building blocks provides an interesting route to produce well-defined chemical structures. Tailoring the functionalities on the building blocks and controlling the time of self-assembly could control the properties as well as the structure of the resultant patterns. Spontaneous self-assembly of biomolecules can generate bio-interfaces for myriad of potential applications. Here we report self-assembled patterning of human serum albumin (HSA) protein in to ring structures on a polyethylene glycol (PEG) modified gold surface. The structure of the self-assembled protein molecules and kinetics of structure formation entirely revolved around controlling the nucleation of the base layer. The formation of different sizes of ring patterns is attributed to growth conditions of the PEG islands for bio-conjugation. These assemblies might be beneficial in forming structurally ordered architectures of active proteins such as HSA or other globular proteins.

Self-assembled three-dimensional graphene-based materials for dye adsorption and catalysis

2015 ◽  
Vol 3 (18) ◽  
pp. 10031-10037 ◽  
Author(s):  
Xueping Zhang ◽  
Dong Liu ◽  
Lu Yang ◽  
Limin Zhou ◽  
Tianyan You
Keyword(s):  
Adsorption Capacity ◽  
Self Assembly ◽  
Three Dimensional ◽  
Dye Adsorption ◽  
Reduction Process ◽  
High Adsorption ◽  
Graphene Aerogel ◽  
High Adsorption Capacity ◽  
Self Assembled

Graphene aerogel (GA) fabricated via a simultaneous self-assembly and reduction process showed high adsorption capacity towards dyes.

X-ray characterization of contact holes for block copolymer lithography

2019 ◽  
Vol 52 (1) ◽  
pp. 106-114
Author(s):  
Daniel F. Sunday ◽  
Florian Delachat ◽  
Ahmed Gharbi ◽  
Guillaume Freychet ◽  
Christopher D. Liman ◽  
...  
Keyword(s):  
Self Assembly ◽  
Low Cost ◽  
Ion Beam ◽  
Three Dimensional ◽  
Incident Beam ◽  
Residual Layer ◽  
Processing Conditions ◽  
Dimensional Metrology ◽  
Grid Pattern ◽  
X Ray

The directed self-assembly (DSA) of block copolymers (BCPs) is a promising low-cost approach to patterning structures with critical dimensions (CDs) which are smaller than can be achieved by traditional photolithography. The CD of contact holes can be reduced by assembling a cylindrical BCP inside a patterned template and utilizing the native size of the cylinder to dictate the reduced dimensions of the hole. This is a particularly promising application of the DSA technique, but in order for this technology to be realized there is a need for three-dimensional metrology of the internal structure of the patterned BCP in order to understand how template properties and processing conditions impact BCP assembly. This is a particularly challenging problem for traditional metrologies owing to the three-dimensional nature of the structure and the buried features. By utilizing small-angle X-ray scattering and changing the angle between the incident beam and sample we can reconstruct the three-dimensional shape profile of the empty template and the residual polymer after self-assembly and removal of one of the phases. A two-dimensional square grid pattern of the holes results in scattering in both in-plane directions, which is simplified by converting to a radial geometry. The shape is then determined by simulating the scattering from a model and iterating that model until the simulated and experimental scattering profiles show a satisfactory match. Samples with two different processing conditions are characterized in order to demonstrate the ability of the technique to evaluate critical features such as residual layer thickness and sidewall height. It was found that the samples had residual layer thicknesses of 15.9 ± 3.2 nm and 4.5 ± 2.2 nm, which were clearly distinguished between the two different DSA processes and in good agreement with focused ion beam scanning transmission electron microscopy (FIBSTEM) observations. The advantage of the X-ray measurements is that FIBSTEM characterizes around ten holes, while there are of the order of 800 000 holes illuminated by the X-ray beam.

scholarly journals A Self-Assembly Portable Mobile Mapping System for Archeological Reconstruction Based on VSLAM-Photogrammetric Algorithm

Sensors ◽  
2019 ◽  
Vol 19 (18) ◽  
pp. 3952 ◽  
Author(s):  
* ◽  
*
Keyword(s):  
Self Assembly ◽  
Average Distance ◽  
Low Cost ◽  
Three Dimensional ◽  
Point Clouds ◽  
3D Models ◽  
Data Capture ◽  
Information Modeling ◽  
3D Point Clouds ◽  
Mean Square Errors

Three Dimensional (3D) models are widely used in clinical applications, geosciences, cultural heritage preservation, and engineering; this, together with new emerging needs such as building information modeling (BIM) develop new data capture techniques and devices with a low cost and reduced learning curve that allow for non-specialized users to employ it. This paper presents a simple, self-assembly device for 3D point clouds data capture with an estimated base price under €2500; furthermore, a workflow for the calculations is described that includes a Visual SLAM-photogrammetric threaded algorithm that has been implemented in C++. Another purpose of this work is to validate the proposed system in BIM working environments. To achieve it, in outdoor tests, several 3D point clouds were obtained and the coordinates of 40 points were obtained by means of this device, with data capture distances ranging between 5 to 20 m. Subsequently, those were compared to the coordinates of the same targets measured by a total station. The Euclidean average distance errors and root mean square errors (RMSEs) ranging between 12–46 mm and 8–33 mm respectively, depending on the data capture distance (5–20 m). Furthermore, the proposed system was compared with a commonly used photogrammetric methodology based on Agisoft Metashape software. The results obtained demonstrate that the proposed system satisfies (in each case) the tolerances of ‘level 1’ (51 mm) and ‘level 2’ (13 mm) for point cloud acquisition in urban design and historic documentation, according to the BIM Guide for 3D Imaging (U.S. General Services).

Hybrid Inorganic/Organic Self-Assembled Clays Nanocomposites for Roll to Roll Fabrication in Photovoltaics

2009 ◽  
Vol 1196 ◽  
Author(s):  
Peter Njagwa Kariuki ◽  
Jessica Gendron ◽  
Christopher Matthew Madl ◽  
Jasper Chiguma ◽  
Michael E Hagerman ◽  
...  
Keyword(s):  
Titanium Dioxide ◽  
Indium Tin Oxide ◽  
Self Assembly ◽  
Titanium Dioxide Nanoparticles ◽  
Low Cost ◽  
Flexible Substrate ◽  
Roll To Roll ◽  
Organic Photovoltaic Materials ◽  
Self Assembled ◽  
Electrically Conducting Polymers

AbstractWe have been developing a new approach to layered hybrid (inorganic/organic) photovoltaic materials for fabrication by Roll-to-Roll (R2R) manufacturing. In this report, we combine the low cost and processability of organic electrically conducting polymers with the efficiency of dye sensitized titanium dioxide, semi-conductor quantum dots (CdSe) self-assembled on layered clay materials (Laponite) onto indium tin oxide coated flexible substrate polyethylene terephthalate (PET) substrates. We have shown electron transfer, guest-guest and host-guest interactions, charge separation, spectral line broadening, and quenching of fluorescence signals which indicate electronic coupling of the dye [Ru(bpy)3]2+ on a CdSe nanocrystal and titanium dioxide nanoparticles. Scanning electron microscopy and atomic force microscopy demonstrate successful nanoparticle formation and thin film self-assembly, as well as surface morphology and polymer thickness.

Periodically ordered nanohetero inorganic structures of nanoparticles, nanorods and layers in a matrix from self-assembled block copolymers

2014 ◽  
Vol 1706 ◽  
Author(s):  
Hiroaki Wakayama ◽  
Hirotaka Yonekura ◽  
Yasuaki Kawai
Keyword(s):  
Block Copolymers ◽  
Self Assembly ◽  
Three Dimensional ◽  
Functional Materials ◽  
Domain Size ◽  
Great Promise ◽  
Layer By Layer ◽  
Simple Method ◽  
Self Assembled ◽  
Size And Morphology

ABSTRACTPeriodically ordered nanohetero inorganic structures offer great promise due to their unique electric, ionic, magnetic, and photonic properties. Many studies have focused on the formation of periodically ordered nano-hetero inorganic structures through layer-by-layer adsorption, sputtering, and self-assembly methods. However, the construction of three-dimensional periodically ordered nanohetero inorganic structures with desired sizes and morphologies remains a great challenge. We present a simple method for producing three-dimensional periodically ordered inorganic nanoheterostructures with controlled shape and size by replicating self-assembled block copolymers (BCPs) containing precursors of metals and metal oxides. Precursors were dissolved with BCPs in a solvent. Upon evaporation of the solvent, each precursor was selectively introduced into a separate polymer block. Application of an external magnetic field (10 T) to the BCP-precursor composites resulted in a phase transition of from spheres to hexagonal cylinders. Subsequent pyrolytic removal of the BCPs produced periodically ordered nanoheterostructures that were structural replicates of the precursor–BCP composites. Self-assembled nano-hetero inorganic structures of nanoparticles, nanorods and layers in a matrix were produced. The morphology and domain size can be tailored by controlling the molecular weight and relative block length of block copolymers. The controlled size and morphology of the inorganic nanoheterostructures demonstrate the method’s utility for producing highly functional materials.

Sign in / Sign up

Export Citation Format

Share Document