Hydrothermal synthesis of well-crystallized CuO hierarchical structures and their direct application in high performance lithium-ion battery electrodes without further calcination

RSC Advances ◽  
2016 ◽  
Vol 6 (99) ◽  
pp. 96882-96888 ◽  
Author(s):  
Hequan Wang ◽  
Tangwen Liang ◽  
Xiao Yu ◽  
Wenxia Zhao ◽  
Ruimei Xu ◽  
...  
Keyword(s):  
Hydrothermal Synthesis ◽  
Energy Saving ◽  
Lithium Ion Battery ◽  
Hydrothermal Method ◽  
High Performance ◽  
Hierarchical Structures ◽  
Lithium Ion ◽  
Direct Application ◽  
Li Ion Batteries ◽  
Li Ion

As an energy-saving strategy, well-crystallized CuO hierarchical structures are synthesized by hydrothermal method and applied in Li-ion batteries without calcination.

scholarly journals Two-phase interface hydrothermal synthesis of binder-free SnS2/graphene flexible paper electrodes for high-performance Li-ion batteries

RSC Advances ◽  
2019 ◽  
Vol 9 (41) ◽  
pp. 23607-23613 ◽  
Author(s):  
Hao Wen ◽  
Wenbin Kang ◽  
Xingang Liu ◽  
Wenjuan Li ◽  
Liping Zhang ◽  
...  
Keyword(s):  
Hydrothermal Synthesis ◽  
High Performance ◽  
Hydrothermal Reaction ◽  
Phase Interface ◽  
Lithium Ion ◽  
Li Ion Batteries ◽  
Two Phase ◽  
Excellent Electrochemical Performance ◽  
Binder Free ◽  
Li Ion

Binder-free SnS2/graphene flexible paper produced from a two-phase interface hydrothermal reaction with excellent electrochemical performance for lithium-ion batteries.

Topological semimetal porous carbon as a high-performance anode for Li-ion batteries

2019 ◽  
Vol 7 (23) ◽  
pp. 14253-14259 ◽  
Author(s):  
Huanhuan Xie ◽  
Yu Qie ◽  
Muhammad Imran ◽  
Qiang Sun
Keyword(s):  
Lithium Ion Battery ◽  
Porous Carbon ◽  
High Performance ◽  
Electronic Conductivity ◽  
Lithium Ion ◽  
Li Ion Batteries ◽  
High Electronic Conductivity ◽  
Topological Semimetal ◽  
Li Ion ◽  
Battery Anode

Motivated by the advantages of inherent high electronic conductivity and ordered porosity of topological semimetal monoclinic C16 (m-C16), we explore its possible use as a lithium-ion battery anode material.

Mo-doped LiV3O8 nanorod-assembled nanosheets as a high performance cathode material for lithium ion batteries

2015 ◽  
Vol 3 (7) ◽  
pp. 3547-3558 ◽  
Author(s):  
Huanqiao Song ◽  
Yaguang Liu ◽  
Cuiping Zhang ◽  
Chaofeng Liu ◽  
Guozhong Cao
Keyword(s):  
Cathode Material ◽  
Lithium Ion Batteries ◽  
Hydrothermal Method ◽  
Discharge Capacity ◽  
High Performance ◽  
Lithium Ion ◽  
Cycle Performance ◽  
Li Ion Batteries ◽  
Subsequent Calcination ◽  
Li Ion

A new Mo-doped LiV3O8 nanorod-assembled nanosheet was prepared by a simple hydrothermal method and subsequent calcination. Its unique structure demonstrates a maximum discharge capacity of 269 mAh g−1 at 300 mA g−1 within 4.0-2.0 V, and excellent rate and cycle performance for Li-ion batteries.

Carbonate-assisted hydrothermal synthesis of porous, hierarchical CuO microspheres and CuO/GO for high-performance lithium-ion battery anodes

RSC Advances ◽  
2015 ◽  
Vol 5 (104) ◽  
pp. 85179-85186 ◽  
Author(s):  
Lin Shi ◽  
Xinxin Fu ◽  
Chenyao Fan ◽  
Siqi Yu ◽  
Guodong Qian ◽  
...  
Keyword(s):  
Hydrothermal Synthesis ◽  
Ionic Strength ◽  
Lithium Ion Battery ◽  
Hydrothermal Method ◽  
High Performance ◽  
Lithium Ion ◽  
Nacl Solution ◽  
Cuo Microspheres

Porous, hierarchical CuO microspheres were synthesized by a facile carbonate-assisted hydrothermal method and encapsulated with GO sheets through engineering the ionic strength in NaCl solution.

scholarly journals Novel core–shell structured Si/S-doped-carbon composite with buffering voids as high performance anode for Li-ion batteries

RSC Advances ◽  
2017 ◽  
Vol 7 (5) ◽  
pp. 2407-2414 ◽  
Author(s):  
Dan Shao ◽  
Inna Smolianova ◽  
Daoping Tang ◽  
Lingzhi Zhang
Keyword(s):  
Hydrothermal Method ◽  
High Performance ◽  
Reversible Capacity ◽  
Carbon Composite ◽  
Core Shell ◽  
Li Ion Batteries ◽  
Li Ion

Novel core–shell structured Si/S-doped carbon composite with buffering voids prepared by hydrothermal method and followed by carbonization and removal of template layer, exhibiting a reversible capacity of 664 mA h g−1 over 300 cycles.

scholarly journals Designing of Lithium - Ion Battery Pack Rechargeable on a Hybrid System with Battery Management System (BMS) for DC Loads of Low Power Applications – A Prototype Model

2021 ◽  
Vol 2089 (1) ◽  
pp. 012017
Author(s):  
Ramu Bhukya ◽  
Praveen Kumar Nalli ◽  
Kalyan Sagar Kadali ◽  
Mahendra Chand Bade
Keyword(s):  
Lithium Ion Battery ◽  
Management System ◽  
Short Circuit ◽  
Lithium Ion ◽  
Battery Pack ◽  
Prototype Model ◽  
Battery Management System ◽  
Battery Management ◽  
Li Ion Batteries ◽  
Li Ion

Abstract Now a days, Li-ion batteries are quite possibly the most exceptional battery-powered batteries; these are drawing in much consideration from recent many years. M Whittingham first proposed lithium-ion battery technology in the 1970s, using titanium sulphide for the cathode and lithium metal for the anode. Li-ion batteries are the force to be reckoned with for the advanced electronic upset in this cutting-edge versatile society, solely utilized in cell phones and PC computers. A battery is a Pack of cells organized in an arrangement/equal association so the voltage can be raised to the craving levels. Lithium-ion batteries, which are completely utilised in portable gadgets & electric vehicles, are the driving force behind the digital technological revolution in today’s mobile societies. In order to protect and maintain voltage and current of the battery with in safe limit Battery Management System (BMS) should be used. BMS provides thermal management to the battery, safeguarding it against over and under temperature and also during short circuit conditions. The battery pack is designed with series and parallel connected cells of 3.7v to produce 12v. The charging and releasing levels of the battery pack is indicated by interfacing the Arduino microcontroller. The entire equipment is placed in a fiber glass case (looks like aquarium) in order to protect the battery from external hazards to design an efficient Lithium-ion battery by using Battery Management System (BMS). We give the supply to the battery from solar panel and in the absence of this, from a regular AC supply.

scholarly journals Charge and Discharge Behaviour of Li-Ion Batteries at Various Temperatures Containing LiCoO2 Nanostructured Cathode Produced by CCSO

2015 ◽  
Vol 15 (4) ◽  
pp. 301 ◽  
Author(s):  
Y.Y. Mamyrbayeva ◽  
R.E. Beissenov ◽  
M.A. Hobosyan ◽  
S.E. Kumekov ◽  
K.S. Martirosyan
Keyword(s):  
Lithium Ion Battery ◽  
Active Material ◽  
Lithium Ion ◽  
Synthetic Approach ◽  
Capacity Fade ◽  
Li Ion Batteries ◽  
Material Loss ◽  
Method Performance ◽  
Battery Capacity ◽  
Li Ion

<p>There are technical barriers for penetration market requesting rechargeable lithium-ion battery packs for portable devices that operate in extreme hot and cold environments. Many portable electronics are used in very cold (-40 °C) environments, and many medical devices need batteries that operate at high temperatures. Conventional Li-ion batteries start to suffer as the temperature drops below 0 °C and the internal impedance of the battery  increases. Battery capacity also reduced during the higher/lower temperatures. The present work describes the laboratory made lithium ion battery behaviour features at different operation temperatures. The pouch-type battery was prepared by exploiting LiCoO<sub>2</sub> cathode material synthesized by novel synthetic approach referred as Carbon Combustion Synthesis of Oxides (CCSO). The main goal of this paper focuses on evaluation of the efficiency of positive electrode produced by CCSO method. Performance studies of battery showed that the capacity fade of pouch type battery increases with increase in temperature. The experimental results demonstrate the dramatic effects on cell self-heating upon electrochemical performance. The study involves an extensive analysis of discharge and charge characteristics of battery at each temperature following 30 cycles. After 10 cycles, the battery cycled at RT and 45 °C showed, the capacity fade of 20% and 25% respectively. The discharge capacity for the battery cycled at 25 °C was found to be higher when compared with the battery cycled at 0 °C and 45 °C. The capacity of the battery also decreases when cycling at low temperatures. It was important time to charge the battery was only 2.5 hours to obtain identical nominal capacity under the charging protocol. The decrease capability of battery cycled at high temperature can be explained with secondary active material loss dominating the other losses.</p>

scholarly journals Urchin-like CoO–C micro/nano hierarchical structures as high performance anode materials for Li-ion batteries

RSC Advances ◽  
2017 ◽  
Vol 7 (5) ◽  
pp. 2637-2643 ◽  
Author(s):  
Lili Liu ◽  
Lihui Mou ◽  
Jia Yu ◽  
Shimou Chen
Keyword(s):  
Hierarchical Structure ◽  
Anode Materials ◽  
High Performance ◽  
Hierarchical Structures ◽  
Li Ion Batteries ◽  
Carbon Coated ◽  
Li Ion ◽  
Li Storage

Urchin-like microspheres consisting of radial carbon-coated cobalt monoxide nanowires are designed, to fabricate a micro/nano hierarchical structure for efficient Li-storage.

One pot hydrothermal synthesis of graphene like MoS2 nanosheets for application in high performance lithium ion batteries

RSC Advances ◽  
2015 ◽  
Vol 5 (71) ◽  
pp. 57666-57670 ◽  
Author(s):  
Chandrasekar Perumal Veeramalai ◽  
Fushan Li ◽  
Hongyuan Xu ◽  
Tae Whan Kim ◽  
Tailiang Guo
Keyword(s):  
Hydrothermal Synthesis ◽  
Lithium Ion Batteries ◽  
High Performance ◽  
Lithium Ion ◽  
Li Ion Battery ◽  
Mos2 Nanosheets ◽  
Excellent Performance ◽  
One Pot ◽  
Li Ion ◽  
Battery Anode

The excellent performance of hydrothermally synthesized MoS2 few layer nanosheets as a Li-ion battery anode material is demonstrated.

Hydrothermal synthesis of organometal halide perovskites for Li-ion batteries

2015 ◽  
Vol 51 (72) ◽  
pp. 13787-13790 ◽  
Author(s):  
Hua-Rong Xia ◽  
Wen-Tao Sun ◽  
Lian-Mao Peng
Keyword(s):  
Hydrothermal Synthesis ◽  
Hydrothermal Method ◽  
Lithium Batteries ◽  
Anode Materials ◽  
Structural Diversity ◽  
Li Ion Batteries ◽  
Li Ion Battery ◽  
Halide Perovskites ◽  
Li Ion

A facile rapid hydrothermal method was developed to prepare CH3NH3PbBr3 and CH3NH3PbI3. The as-prepared products were utilized in lithium batteries as anode materials with good performance. Considering the structural diversity, more hybrid perovskites can be targets for further optimization, indicating their promising potential in Li-ion battery applications.

Sign in / Sign up

Export Citation Format

Share Document