Kinetic study of the alkaline degradation of imidapril hydrochloride using a validated stability indicating HPLC method

RSC Advances ◽  
2016 ◽  
Vol 6 (73) ◽  
pp. 69239-69250
Author(s):  
Shabaan A. Abdulla ◽  
Eman Y. Frag ◽  
Heba E. Ahmed
Keyword(s):  
Kinetic Study ◽  
Degradation Products ◽  
Hplc Method ◽  
Alkaline Degradation ◽  
Degradation Study ◽  
Stability Indicating ◽  
Stability Indicating Method ◽  
Imidapril Hydrochloride

An aqueous alkaline degradation study was performed for imidapril hydrochloride (IMD) drug in the presence of its degradation products and an isocratic stability indicating method was presented using HPLC.

Development and Validation of a Stability-Indicating HPLC Method for Imidapril and Its Degradation Products Using a Design of Experiment (DoE) Approach

2017 ◽  
Vol 100 (6) ◽  
pp. 1727-1738 ◽  
Author(s):  
Abiramasundari Arumugam ◽  
Amita Joshi ◽  
Kamala K Vasu
Keyword(s):  
Flow Rate ◽  
Design Of Experiment ◽  
Degradation Products ◽  
Desirability Function ◽  
Hplc Method ◽  
Stability Indicating ◽  
Stability Indicating Method ◽  
Two Factors ◽  
Derringer’S Desirability Function ◽  
Imidapril Hydrochloride

Abstract The present work focused on the application of design of experiment (DoE) principles to the development and optimization of a stability-indicating method (SIM) for the drug imidapril hydrochloride and its degradation products (DPs). The resolution of peaks for the DPs and their drug in a SIM can be influenced by many factors. The factors studied here were pH, gradient time, organic modifier, flow rate, molar concentration of the buffer, and wavelength, with the aid of a Plackett–Burman design. Results from the Plackett–Burman study conspicuously showed influence of two factors, pH and gradient time, on the analyzed response, particularly, the resolution of the closely eluting DPs (DP-5 and DP-6) and the retention time of the last peak. Optimization of the multiresponse processes was achieved through Derringer’s desirability function with the assistance of a full factorial design. Separation was achieved using a C18 Phenomenex Luna column (250 × 4.6 mm id, 5 µm particle size) at a flow rate of 0.8 mL/min at 210 nm. The optimized mobile phase composition was ammonium–acetate buffer (pH 5) in pump A and acetonitrile–methanol (in equal ratio) in pump B with a run time of 40 min using a gradient method.

scholarly journals Validation of Stability Indicating Method and Degradation Kinetic Study of Apremilast

2020 ◽  
Vol 10 (2) ◽  
pp. 76-85
Author(s):  
Jitesha Patel ◽  
Parin Chokshi ◽  
Rajashree Mashru
Keyword(s):  
Kinetic Study ◽  
Hplc Method ◽  
Forced Degradation ◽  
Order Kinetic ◽  
Degradation Kinetic ◽  
Degradation Study ◽  
Potassium Dihydrogen ◽  
Stability Indicating ◽  
Stability Indicating Method ◽  
Rp Hplc

A novel stability indicating RP- HPLC method was developed for the estimation of Apremilast in bulk and marketed formulation. Separation was achieved by using Shimadzu HPLC Analytical Technologies Limited C18 (250 mm x 4.6 mm, 5µm) as stationary phase. The optimized mobile phase consist of potassium dihydrogen ortho phosphate (pH-3.2): acetonitrile in ratio of 40:60 %v/v with flow rate of 1mL/min by using methanol as diluent. Retention time of Apremilast was found to be 5.4 min which was estimated at wavelength 360nm. Linearity of Apremilast was observed in the concentration range of 50-400µg/mL with r² value of 0.9999. Assay of Apremilast tablet was found to be 99.14-100.75%. Stability indicating nature of RP- HPLC method was estimated by conducting degradation kinetic study. The forced degradation of Apremilast bulk indicate that degradation in acidic, alkali, oxidative and photolysis condition were found to be 21%, 6.5%, 25.7% and 3.9% respectively. The kinetic study of apremilast in alkali degradation followed first order kinetic study. The result indicate that the developed RP-HPLC method is suitable for estimation of Apremilast in presence of degradant product. The above method was validated as per ICH guideline. Keywords: Apremilast, RP-HPLC, Validation, Forced Degradation Study, Alkali Degradation Kinetic study

scholarly journals Development and Validation of a Stability-Indicating RP-HPLC Method for Determination of Atomoxetine Hydrochloride in Tablets

2010 ◽  
Vol 93 (4) ◽  
pp. 1207-1214 ◽  
Author(s):  
Sejal K Patel ◽  
Natvarlal J Patel
Keyword(s):  
Degradation Products ◽  
Hplc Method ◽  
Stress Conditions ◽  
Acid Base ◽  
Photodiode Array Detection ◽  
Stability Indicating ◽  
Stability Indicating Method ◽  
Rp Hplc ◽  
Wet Heat

Abstract This paper describes the development of a stability-indicating RP-HPLC method for the determination of atomoxetine hydrochloride (ATX) in the presence of its degradation products generated from forced decomposition studies. The drug substance was subjected to stress conditions of acid, base, oxidation, wet heat, dry heat, and photodegradation. In stability tests, the drug was susceptible to acid, base, oxidation, and dry and wet heat degradation. It was found to be stable under the photolytic conditions tested. The drug was successfully separated from the degradation products formed under stress conditions on a Phenomenex C18 column (250 4.6 mm id, 5 m particle size) by using acetonitrilemethanol0.032 M ammonium acetate (55 + 05 + 40, v/v/v) as the mobile phase at 1.0 mL/min and 40C. Photodiode array detection at 275 nm was used for quantitation after RP-HPLC over the concentration range of 0.55 g/mL with a mean recovery of 100.8 0.4 for ATX. Statistical analysis demonstrated that the method is repeatable, specific, and accurate for the estimation of ATX. Because the method effectively separates the drug from its degradation products, it can be used as a stability-indicating method.

scholarly journals Stability Indicating Method to Analyze Benidipine and Chlorthalidone Using HPLC Technique: Establishment, Validation and Application to Tablets

2020 ◽  
Vol 26 (1) ◽  
pp. 75-81
Author(s):  
Kadali Jagadeesh ◽  
Nowduri Annapurna
Keyword(s):  
Hplc Method ◽  
Phase System ◽  
Reverse Phase ◽  
Degradation Study ◽  
Stability Indicating ◽  
Stability Indicating Method ◽  
Dipotassium Hydrogen Phosphate ◽  
Photodiode Array ◽  
Tablet Dosage

Background : The combination of chlorthalidone and benidipine was used to manage hypertension. The mixture of chlorthalidone and benidipine in tablet dosage form has not been previously determined by any method. A stability indicating HPLC method was developed for the simultaneous determination of benidipine and chlorthalidone in bulk and tablets. Methods: Chromatographic separation was accomplished in a reverse phase system using an isocratic elution with a mobile phase composed of methanol-0.1M dipotassium hydrogen phosphate buffer (40:60, v/v), at 1 ml/min flow rate. The photodiode array (PDA) detector set at 260 nm was used to detect and quantify benidipine and chlorthalidone. Benidipine and chlorthalidone tablet samples were subjected to degradation under acid, neutral, alkali, thermal, photo and oxidative. The proposed method was effectively adapted to quantify benidipine and chlorthalidone in the combined tablet formulation. Results: The elution times for benidipine and chlorthalidone were approximately 4.573 min and 6.422 min, respectively. The method was validated within a concentration range of 2 - 6 μg/ml (R2 = 0.9997) for benidipine and 6.25 - 18.75 μg/ml (R2 = 0.9998) for chlorthalidone. Adequate results were obtained for precision (RSD% = 0.106% for benidipine and RSD% = 0.031% for chlorthalidone) and accuracy (99.95 - 100.25 % mean recovery for benidipine and 99.60 - 99.63% mean recovery for chlorthalidone). Robustness has also been found to be acceptable. During the degradation study, interference was not noticed in the analysis of studied drugs. Conclusion: The findings demonstrated that the method could be useful for determination of the selected drug combination in routine analysis.

Stability Indicating Method for known and unknown impurities profiling for Vildagliptin in Vildagliptin Tablet

2020 ◽  
Vol 17 ◽  
Author(s):  
Nitin Mahajan ◽  
Mazhar Farooqui ◽  
Suparna Deshmukh
Keyword(s):  
Degradation Products ◽  
Hplc Method ◽  
Alkaline Stress ◽  
Limit Of Quantification ◽  
Stability Indicating ◽  
Oral Antihyperglycemic Agents ◽  
Stability Indicating Method ◽  
Rp Hplc ◽  
Triethyl Amine

Background: Vildagliptin is a drug for the treatment of diabetes. DPP-IV inhibitor represents a new class of oral antihyperglycemic agents to treat patients with type 2 diabetes. Several RP-HPLC method reported for determination of Vildagliptin alone. However, it was noticed that no stability indicating method is available in any Pharmacopeia (USP/BP/EP/JP) or in any literature for quantification of known and unknown impurities profiling for Vildagliptin in Vildagliptin tablets. Objective: The aim of this study to develop a simple, sensitive, rugged, robust and specific novel gradient stability indicating RP-HPLC method for quantitative determination of known, unknown impurities and degradants of Vildagliptin in Vildagliptin Tablets. Methods: Chromatographic separation has been achieved on Hypersil ODS column (250 x 4.6) mm, 5 μm with mobile phase consisting mixture of Perchloric acid Buffer, methanol, acetonitrile and Triethyl amine delivered at flow rate of 1.0 mL minute-1 and the detection wavelength 210 nm. The developed method was validated as per ICH guidelines. Results: Vildagliptin was found degraded significantly under oxidative and alkaline stress condition. The degradation products were well resolved from Vildagliptin and its impurities. Analytical Method found Linear, accurate and precise from LOQ (Limit of Quantification) level to 150 % of impurity specification limit (0.5 %). Conclusion: The method found sensitive, rapid and accurate quantification of known, unknown impurities and degradants. The peak purity results confirmed that the Vildagliptin peak was homogeneous and pure in all stress samples, thus proving the stability indicating nature of the method.

DEVELOPMENT OF A VALIDATED STABILITY-INDICATING METHOD FOR ESTIMATION OF ETHIONAMIDE IN TABLETS BY RP-HPLC AND CHARACTERIZATION OF ITS ISOLATED ALKALI DEGRADATION PRODUCT

INDIAN DRUGS ◽  
2021 ◽  
Vol 58 (01) ◽  
pp. 20-27
Author(s):  
Sandeep S. Sonawane ◽  
◽  
Akshay S. Patil ◽  
Santosh S. Chhajed ◽  
Dimple S. Lalchandani ◽  
...  
Keyword(s):  
Degradation Product ◽  
Elevated Temperatures ◽  
Degradation Products ◽  
Hplc Method ◽  
Forced Degradation ◽  
Stability Indicating ◽  
Stability Indicating Method ◽  
Rp Hplc ◽  
Photolytic Degradation ◽  
Alkali Hydrolysis

A simple, accurate, reproducible and specific stability-indicating RP-HPLC method was developed for estimation of ethionamide in tablets. Ethionamide was exposed to acid, alkali and neutral hydrolysis at elevated temperatures, to thermolytic degradation, peroxide-mediated oxidation at room temperature in dark and to photolytic degradation. The drug was found stable to thermolytic and photolytic conditions and to neutral hydrolysis. However, substantial degradation was obtained in acid and alkali hydrolysis and complete degradation in peroxide-medicated oxidation. Similar degradation behavior was observed when ethionamide tablets were exposed to the mentioned forced degradation conditions. The method showed adequate resolution of drug from its potential degradation products on C18 (250 × 4.6 mm, 5µ) column using mobile phase of methanol: water (50: 50 % V/V) at 1 mL/min. The drug and its potential degradation products were detected at 290 nm. The method was validated as per the ICH Q2(R1) guidelines. The enrichment of the alkali degradation product was performed and isolated by preparative TLC and further confirmed by NMR and IR spectroscopy.

Development and Validation of a Stability Indicating RP-HPLC Method for Hydrocortisone Acetate Active Ingredient, Propyl Parahydroxybenzoate and Methyl Parahydroxybenzoate Preservatives, Butylhydroxyanisole Antioxidant, and Their Degradation Products in a Rectal Gel Formulation

2015 ◽  
Vol 98 (1) ◽  
pp. 27-34 ◽  
Author(s):  
Magda Ascaso ◽  
Pilar Pérez-Lozano ◽  
Mireia García ◽  
Encarna García-Montoya ◽  
Montse Miñarro ◽  
...  
Keyword(s):  
Active Ingredient ◽  
Active Substance ◽  
Degradation Products ◽  
Gradient Elution ◽  
Hplc Method ◽  
Array Detector ◽  
Hydrocortisone Acetate ◽  
Stability Indicating ◽  
Stability Indicating Method ◽  
The Stability

Abstract A stability indicating method was established through a stress study, wherein different methods of degradation (oxidation, hydrolysis, photolysis, and temperature) were studied simultaneously to determine the active ingredient hydrocortisone acetate, preservatives propyl parahydroxybenzoate, and methyl parahydroxybenzoate, antioxidant butylhydroxyanisole (BHA), and their degradation products in a semisolid dosage gel form. The proposed method was suitably validated using a Zorbax SB-Phenyl column and gradient elution. The mobile phase consisted of a mixture of methanol, acetonitrile, and water in different proportions according to a planned program at a flow rate of 1.5 mL/min. The diode array detector was set at 240 nm for the active substance and two preservatives,and 290 nm for BHA. The validation study was conducted according to International Conference on Harmonization guidelines for specificity, linearity, repeatability, precision, and accuracy. The method was usedfor QC of hydrocortisone acetate gel and for the stability studies with the aim of quantifying the active substance, preservatives, antioxidant, and degradation products. It has proved to be suitable as a fast and reliable method for QC.

scholarly journals Stability-Indicating HPLC Method for isoflavones aglycones analysis from Trifolium pratense L. extract

2020 ◽  
Vol 4 (1) ◽  
pp. 28-38
Author(s):  
Simony Martiny ◽  
Mairique Waszczuk ◽  
Samuel Kaiser ◽  
Marina Cardoso Nemitz ◽  
Valquiria Linck Bassani
Keyword(s):  
Hplc Analysis ◽  
Trifolium Pratense ◽  
Degradation Products ◽  
Hplc Method ◽  
Alkaline Media ◽  
Biochanin A ◽  
Forced Degradation ◽  
Stability Indicating ◽  
Stability Indicating Method ◽  
The Stability

The purpose of this study was to develop and validate a fast HPLC stability-indicating method for simultaneously quantifying the four main isoflavones in Trifolium pratense. Validation procedures followed the ICH requirements for complex matrices. The stability-indicating tests were performed by exposing the isoflavones to conditions of forced degradation and further analysis for verifying the formation of degradation products and their possible interferences in the HPLC analysis. The major isoflavones of Trifolium pratense proved to be stable against acid and oxidative media, thermodegradation, and photodegradation. However, they proved to be unstable in alkaline media, even for short periods of exposure like 2h. In this condition, in addition to the peaks corresponding to isoflavones, the HPLC analysis showed the presence of three additional peaks which were eluted at different retention times to the reference substances, without interfering in the quantification of the four analytes of interest, formononetin, biochanin A, daidzein and genistein. The method was validated following ICH guidelines showing to be specific, linear, precise, accurate, and robust.This first report concerning a stability-indicating method revealed that the proposed HPLC method reliably quantify the isoflavones and separate them from the degradation products in a short time of analysis.

STABILITY INDICATING RP-HPLC METHOD FOR SEPARATION AND QUANTIFICATION OF RELATED SUBSTANCES OF TICLOPIDINE IN BULK AND PHARMACEUTICAL FORMULATIONS

INDIAN DRUGS ◽  
2021 ◽  
Vol 58 (08) ◽  
pp. 75-78
Author(s):  
B. S. Venkateswarlu ◽  
Prudhvi N. Sai ◽  
Keyword(s):  
Degradation Products ◽  
Pharmaceutical Formulations ◽  
Hplc Method ◽  
Standard Drug ◽  
Stability Indicating ◽  
Stress Studies ◽  
Related Substances ◽  
Stability Indicating Method ◽  
Stress Degradation ◽  
Bulk Drug

A simple, specific, accurate and stable reverse phase liquid chromatographic method was developed for the simultaneous determination of ticlopidine and its related impurities A and B in bulk drug and tablet dosage forms. The analysis has been performed on XTerra C18 column (250 mm×4.6 mm; 5 µ id) and mobile phase containing of methanol and pH 6.8 phosphate buffer in the ratio of 80:20 (V/V). The detection was carried at 228 nm with a flow rate of 1.0 mL/min. The retention times were found to be 8.9, 5.98 and 4.62 min for ticlopidine, impurities A and B, respectively. The method was validated according to ICH guidelines. The method was validated for specificity, precision, linearity, accuracy and robustness. The linearity range of 50-200 µg/mL for ticlopidine and 0.5-2.0 µg/mL for impurity A and B. The recoveries of ticlopidine and impurities were found to be within the range of 98-102 and the % RSD in each spiked level was found to be less than 2. The stress degradation studies confirmed that the method was effectively separate the degradation products and impurities formed in the stress studies and hence the method was found to be stability indicating method. The method can effectively quantify the standard drug ticlopidine and its impurities A and B in bulk drug and pharmaceutical formulations.

Sign in / Sign up

Export Citation Format

Share Document