scholarly journals Electrochemistry at single bimetallic nanoparticles – using nano impacts for sizing and compositional analysis of individual AgAu alloy nanoparticles

2016 ◽  
Vol 193 ◽  
pp. 327-338 ◽  
Author(s):  
En Ning Saw ◽  
Viktoria Grasmik ◽  
Christian Rurainsky ◽  
Matthias Epple ◽  
Kristina Tschulik
Keyword(s):  
Bimetallic Nanoparticles ◽  
Compositional Analysis ◽  
Alloy Nanoparticles ◽  
Bimetallic Alloy ◽  
Single Nanoparticle ◽  
Transmission Electron ◽  
Alternative Approach ◽  
Scanning Transmission ◽  
Modern Technologies

The increasing interest in producing bimetallic nanoparticles and utilizing them in modern technologies sets the demand for fast and affordable characterization of these materials. To date Scanning Transmission Electron Microscopy (STEM) coupled to energy dispersive X-ray spectroscopy is usually used to determine the size and composition of alloy nanoparticles, which is time-consuming and expensive. Here electrochemical single nanoparticle analysis is presented as an alternative approach to infer the particle size and composition of alloy nanoparticles, directly in a dispersion of these particles. As a proof of concept, 14 nm sized Ag0.73Au0.27 alloy nanoparticles are analyzed using a combination of chronoamperometric single nanoparticle analysis and cyclic voltammetry ensemble studies. It is demonstrated that the size, the alloying and the composition can all be inferred using this approach. Thus, the electrochemical characterization of single bimetallic alloy nanoparticles is suggested here as a powerful and convenient complement or alternative to TEM characterization of alloy nanoparticles.

Nanoanalytical Characterization of Granular Ag-Fe Films with Giant Magnetoresistance

1994 ◽  
Vol 332 ◽  
Author(s):  
J. Liu ◽  
Z. G. Li ◽  
H. Wan ◽  
A. Tsoukatos ◽  
G. C. Hadjipanayis
Keyword(s):  
Scanning Transmission Electron Microscopy ◽  
Giant Magnetoresistance ◽  
Compositional Analysis ◽  
Magnetic Films ◽  
Granular Films ◽  
X Ray ◽  
Transmission Electron ◽  
Ag Particles ◽  
Scanning Transmission

ABSTRACTDedicated scanning transmission electron microscopy and associated techniques were used to extract microstructural and compositional information about granular Ag-Fe magnetic films produced by sputtering. Nanometer-resolution compositional analysis by energy dispersive X-ray spectroscopy (EDS), showed that Ag-Fe granular films consist of two separate phases. It has been found that nanometer size Fe particles are separated by small as well as large Ag particles. Nanodiffraction patterns showed that a large proportion of small Ag particles have an icosahedral shape and that the Fe particles are highly disordered. The nanostructure of the Ag-Fe system and its relation to the giant magnetoresistance of granular films are discussed.

High Spatial Resolution Compositional Analysis at Interfaces

1980 ◽  
Vol 38 ◽  
pp. 356-359
Author(s):  
John B. Vander Sande ◽  
Thomas F. Kelly ◽  
Douglas Imeson
Keyword(s):  
Electron Microscope ◽  
High Spatial Resolution ◽  
Compositional Analysis ◽  
Scanning Transmission Electron Microscope ◽  
Thin Specimen ◽  
X Ray ◽  
Volume Of Interest ◽  
Transmission Electron ◽  
Scanning Transmission ◽  
Electron Energy Loss

In the scanning transmission electron microscope (STEM) a fine probe of electrons is scanned across the thin specimen, or the probe is stationarily placed on a volume of interest, and various products of the electron-specimen interaction are then collected and used for image formation or microanalysis. The microanalysis modes usually employed in STEM include, but are not restricted to, energy dispersive X-ray analysis, electron energy loss spectroscopy, and microdiffraction.

Physical Failure Analysis Techniques for Front-End-of-Line Defect Analysis

2016 ◽  
Author(s):  
Dirk Doyle ◽  
Lawrence Benedict ◽  
Fritz Christian Awitan
Keyword(s):  
Cross Section ◽  
Focused Ion Beam ◽  
Ion Beam ◽  
Gate Oxide ◽  
Top Down ◽  
New Techniques ◽  
First Case ◽  
Transmission Electron ◽  
Scanning Transmission

Abstract Novel techniques to expose substrate-level defects are presented in this paper. New techniques such as inter-layer dielectric (ILD) thinning, high keV imaging, and XeF2 poly etch overflow are introduced. We describe these techniques as applied to two different defects types at FEOL. In the first case, by using ILD thinning and high keV imaging, coupled with focused ion beam (FIB) cross section and scanning transmission electron microscopy (STEM,) we were able to judge where to sample for TEM from a top down perspective while simultaneously providing the top down images giving both perspectives on the same sample. In the second case we show retention of the poly Si short after removal of CoSi2 formation on poly. Removal of the CoSi2 exposes the poly Si such that we can utilize XeF2 to remove poly without damaging gate oxide to reveal pinhole defects in the gate oxide. Overall, using these techniques have led to 1) increased chances of successfully finding the defects, 2) better characterization of the defects by having a planar view perspective and 3) reduced time in localizing defects compared to performing cross section alone.

Intergrowth of niobium tungsten oxides of the tetragonal tungsten bronze type

2020 ◽  
Vol 75 (11) ◽  
pp. 913-919
Author(s):  
Frank Krumeich
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Tungsten Bronze ◽  
Structural Complexity ◽  
Dark Field ◽  
Tetragonal Tungsten Bronze ◽  
Tungsten Oxides ◽  
Transmission Electron ◽  
Scanning Transmission

AbstractSince the 1970s, high-resolution transmission electron microscopy (HRTEM) is well established as the most appropriate method to explore the structural complexity of niobium tungsten oxides. Today, scanning transmission electron microscopy (STEM) represents an important alternative for performing the structural characterization of such oxides. STEM images recorded with a high-angle annular dark field (HAADF) detector provide not only information about the cation positions but also about the distribution of niobium and tungsten as the intensity is directly correlated to the local scattering potential. The applicability of this method is demonstrated here for the characterization of the real structure of Nb7W10O47.5. This sample contains well-ordered domains of Nb8W9O47 and Nb4W7O31 besides little ordered areas according to HRTEM results. Structural models for Nb4W7O31 and twinning occurring in this phase have been derived from the interpretation of HAADF-STEM images. A remarkable grain boundary between well-ordered domains of Nb4W7O31 and Nb8W9O47 has been found that contains one-dimensionally periodic features. Furthermore, short-range order observed in less ordered areas could be attributed to an intimate intergrowth of small sections of different tetragonal tungsten bronze (TTB) based structures.

Synthesis and Structural Characterization of Ferromagnetic Au/Co Nanoparticles

2014 ◽  
Vol 1708 ◽  
Author(s):  
Nabraj Bhattarai ◽  
Subarna Khanal ◽  
Daniel Bahena ◽  
Robert L. Whetten ◽  
Miguel Jose-Yacaman
Keyword(s):  
Quantum Interference ◽  
Magnetic Measurements ◽  
Ferromagnetic Behavior ◽  
Contrast Imaging ◽  
Uniform Size ◽  
Transmission Electron ◽  
Scanning Transmission ◽  
Co Nanoparticles ◽  
Z Contrast

ABSTRACTThe synthesis of bimetallic magnetic nanoparticles is very challenging because of the agglomeration and non-uniform size. In this paper, we present the synthesis of monodispersed 3-5 nm sized thiolated bimetallic alloyed Au/Co nanoparticles with decahedral and icosahedral shape, their characterization using Cs-corrected scanning transmission electron microscopy (STEM) and magnetic measurements using superconducting quantum interference device (SQUID) magnetometer. The Z-contrast imaging and energy dispersive X-ray spectroscopy (EDS) mapping showed an inhomogeneous alloying with minor segregation between Au and Co at nanoscale and the SQUID measurement exhibited the ferromagnetic behavior.

Microstructural and Compositional Characterization of SiC-On-Insulator Structures

1999 ◽  
Vol 5 (S2) ◽  
pp. 770-771
Author(s):  
Manabu Ishimaru ◽  
Robert M. Dickerson ◽  
Kurt E. Sickafus
Keyword(s):  
Ion Implantation ◽  
Integrated Circuit ◽  
High Speed ◽  
Scanning Transmission Electron Microscope ◽  
Oxygen Ions ◽  
Oxygen Ion ◽  
Transmission Electron ◽  
Scanning Transmission ◽  
Oxygen Ion Implantation

As the size of Si integrated circuit structures is continually reduced, interest in semiconductor-oninsulator (SOI) structures has heightened. SOI structures have already been developed for Si using oxygen ion implantation. However, the application of Si devices is limited due to the physical properties of Si. As an alternative to Si, SiC is a potentially important semiconductor for high-power, high-speed, and high-temperature electronic devices. Therefore, this material is a candidate for expanding the capabilities of Si-based technology. In this study, we performed oxygen ion implantation into bulk SiC to produce SiC-on-insulator structures. We examined the microstructures and compositional distributions in implanted specimens using transmission electron microscopy and a scanning transmission electron microscope equipped with an energy-dispersive X-ray spectrometer (STEM-EDX).Figures 1(a) and 2(a) show bright-field images of 6H-SiC implanted with 180 keV oxygen ions at 650 °C to fluences of 7xl017 and 1.4xl018 cm−2, respectively. Three regions with distinct image contrast are apparent in Figs. 1(a) and 2(a), as indicated by A, B, and C.

Sign in / Sign up

Export Citation Format

Share Document