High thermoelectric figure-of-merit in Sb2Te3/Ag2Te bulk composites as Pb-free p-type thermoelectric materials

2015 ◽  
Vol 3 (40) ◽  
pp. 10494-10499 ◽  
Author(s):  
Min Ho Lee ◽  
Ka-Ryeong Kim ◽  
Jong-Soo Rhyee ◽  
Su-Dong Park ◽  
G. Jeffrey Snyder
Keyword(s):  
Thermoelectric Materials ◽  
Figure Of Merit ◽  
Thermoelectric Figure Of Merit ◽  
Thermoelectric Figure ◽  
Molar Ratios ◽  
P Type

Sb2Te3/Ag2Te (ST/AT) composites with ST/AT molar ratios of 1/1, 2/1, 4/1, 8/1, 16/1, and 32/1 were synthesized, and high ZT values were achieved compared with other Pb-free p-type chalcogenide thermoelectric materials.

Significantly enhanced thermoelectric figure of merit of p-type Mg3Sb2-based Zintl phase compounds via nanostructuring and employing high energy mechanical milling coupled with spark plasma sintering

2015 ◽  
Vol 3 (20) ◽  
pp. 10777-10786 ◽  
Author(s):  
A. Bhardwaj ◽  
N. S. Chauhan ◽  
D. K. Misra
Keyword(s):  
Thermoelectric Materials ◽  
Mechanical Milling ◽  
Figure Of Merit ◽  
High Energy ◽  
Thermoelectric Figure Of Merit ◽  
Zintl Phase ◽  
Thermoelectric Figure ◽  
Plasma Sintering ◽  
Spark Plasma ◽  
P Type

Several nanostructuring methods have been demonstrated to produce a variety of nanostructured materials, and these methods are well recognized as effective paradigms for improving the performance of thermoelectric materials.

Electrical Properties and Figures of Merit for New Chalcogenide-Based Thermoelectric Materials

1997 ◽  
Vol 478 ◽  
Author(s):  
Jon L. Schindler ◽  
Tim P. Hogan ◽  
Paul W. Brazis ◽  
Carl R. Kannewurf ◽  
Duck-Young Chung ◽  
...  
Keyword(s):  
Thermoelectric Materials ◽  
Figure Of Merit ◽  
Room Temperature ◽  
Thermoelectric Figure Of Merit ◽  
Thermoelectric Figure ◽  
Figures Of Merit ◽  
Lattice Symmetry ◽  
Thermoelectric Refrigeration ◽  
Polychalcogenide Flux ◽  
P Type

AbstractNew Bi-based chalcogenide compounds have been prepared using the polychalcogenide flux technique for crystal growth. These materials exhibit characteristics of good thermoelectric materials. Single crystals of the compound CsBi4Te6 have shown conductivity as high as 2440 S/cm with a p-type thermoelectric power of ≈ +110 μV/K at room temperature. A second compound, β-K2Bi8Se13 shows lower conductivity ≈ 240 S/cm, but a larger n-type thermopower ≈ −200 μV/K. Thermal transport measurements have been performed on hot-pressed pellets of these materials and the results show comparable or lower thermal conductivities than Bi2Te3. This improvement may reflect the reduced lattice symmetry of the new chalcogenide thermoelectrics. The thermoelectric figure of merit for CsBi4Te6 reaches ZT ≈ 0.32 at 260 K and for β-K2Bi8Se13 ZT ≈ 0.32 at room temperature, indicating that these compounds are viable candidates for thermoelectric refrigeration applications.

A synergistic combination of atomic scale structural engineering and panoscopic approach in p-type ZrCoSb-based half-Heusler thermoelectric materials for achieving high ZT

2016 ◽  
Vol 4 (24) ◽  
pp. 5766-5778 ◽  
Author(s):  
N. S. Chauhan ◽  
A. Bhardwaj ◽  
T. D. Senguttuvan ◽  
R. P. Pant ◽  
R. C. Mallik ◽  
...  
Keyword(s):  
Thermoelectric Materials ◽  
Figure Of Merit ◽  
Structural Engineering ◽  
Atomic Scale ◽  
Significant Enhancement ◽  
Thermoelectric Figure Of Merit ◽  
Thermoelectric Figure ◽  
Synergistic Combination ◽  
P Type

In situ synthesis of composites employing ASSET in combination with panoscopic approach has been demonstrated in p-type ZrCoSb-based half-Heusler thermoelectric materials for significant enhancement in thermoelectric figure of merit.

Thermoelectric Properties of n-Type 90% Bi2Te3+10%Bi2Se3 Thermoelectric Materials Produced by Melt Spinning Method and Sintering

2007 ◽  
Vol 534-536 ◽  
pp. 161-164 ◽  
Author(s):  
Taek Soo Kim ◽  
Byong Sun Chun
Keyword(s):  
Solid Solutions ◽  
Thermoelectric Materials ◽  
Figure Of Merit ◽  
Melt Spinning ◽  
Bending Strength ◽  
Sintering Temperature ◽  
Thermoelectric Figure Of Merit ◽  
Vacuum Sintering ◽  
Thermoelectric Figure ◽  
Sintering Processes

N-type Bi2Te3-Sb2Te3 solid solutions doped with CdCl2 was prepared by melt spinning, crushing and vacuum sintering processes. Microstructure, bending strength and thermoelectric property were investigated as a function of the doping quantity from 0.03wt.% to 0.10wt.% and sintering temperature from 400oC to 500oC, and finally compared with those of conventionally fabricated alloys. The alloy showed a good structural homogeneity as well as bending strength of 3.88Kgf/mm2. The highest thermoelectric figure of merit was obtained by doping 0.03wt.% and sintering at 500oC.

High-Thermoelectric Figure of Merit Realized in p-Type Half-Heusler Compounds: ZrCoSnxSb1-x

2007 ◽  
Vol 46 (No. 27) ◽  
pp. L673-L675 ◽  
Author(s):  
Takeyuki Sekimoto ◽  
Ken Kurosaki ◽  
Hiroaki Muta ◽  
Shinsuke Yamanaka
Keyword(s):  
Figure Of Merit ◽  
Thermoelectric Figure Of Merit ◽  
Heusler Compounds ◽  
Thermoelectric Figure ◽  
P Type

The effects of Ge doping on the thermoelectric performance of p-type polycrystalline SnSe

RSC Advances ◽  
2016 ◽  
Vol 6 (115) ◽  
pp. 114825-114829 ◽  
Author(s):  
Tessera Alemneh Wubieneh ◽  
Cheng-Lung Chen ◽  
Pai Chun Wei ◽  
Szu-Yuan Chen ◽  
Yang-Yuan Chen
Keyword(s):  
Figure Of Merit ◽  
Thermoelectric Performance ◽  
Thermoelectric Figure Of Merit ◽  
Thermoelectric Figure ◽  
P Type ◽  
Ge Doping

Ge doping enables to enhance the thermoelectric figure of merit of SnSe..

scholarly journals Термоэлектрические свойства нанокомпозитного Bi-=SUB=-0.45-=/SUB=-Sb-=SUB=-1.55-=/SUB=-Te-=SUB=-2.985-=/SUB=- с микрочастицами SiO-=SUB=-2-=/SUB=-

2019 ◽  
Vol 53 (6) ◽  
pp. 751
Author(s):  
А.А. Шабалдин ◽  
П.П. Константинов ◽  
Д.А. Курдюков ◽  
Л.Н. Лукьянова ◽  
А.Ю. Самунин ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Solid Solution ◽  
Electrical Conductivity ◽  
Wide Temperature Range ◽  
Figure Of Merit ◽  
Nanostructured Material ◽  
Thermoelectric Figure Of Merit ◽  
Thermoelectric Efficiency ◽  
Thermoelectric Figure ◽  
P Type

AbstractNanocomposite thermoelectrics based on Bi_0.45Sb_1.55Te_2.985 solid solution of p -type conductivity are fabricated by the hot pressing of nanopowders of this solid solution with the addition of SiO_2 microparticles. Investigations of the thermoelectric properties show that the thermoelectric power of the nanocomposites increases in a wide temperature range of 80–420 K, while the thermal conductivity considerably decreases at 80–320 K, which, despite a decrease in the electrical conductivity, leads to an increase in the thermoelectric efficiency in the nanostructured material without the SiO_2 addition by almost 50% (at 300 K). When adding SiO_2, the efficiency decreases. The initial thermoelectric fabricated without nanostructuring, in which the maximal thermoelectric figure of merit ZT = 1 at 390 K, is most efficient at temperatures above 350 K.

Materials With Open Crystal Structure as Prospective Novel Thermoelectrics

1998 ◽  
Vol 545 ◽  
Author(s):  
Ctirad Uher ◽  
Jihui Yang ◽  
Siqing Hu
Keyword(s):  
Crystal Structure ◽  
Thermoelectric Materials ◽  
Figure Of Merit ◽  
Optimal Transport ◽  
Heusler Alloys ◽  
Thermoelectric Figure Of Merit ◽  
Great Flexibility ◽  
Thermoelectric Figure ◽  
Guest Species ◽  
Filled Skutterudites

AbstractA useful approach to identify materials with high thermoelectric figure of merit is to search for solids that offer great flexibility to modify and tailor the structure so as to achieve the optimal transport behavior. Among the most promising novel thermoelectric materials are solids with “open crystal structure”. They may be typified by structures with unfilled cages, crystals with an empty atomic sublattice, and by a network of polyhedral cages enclosing guest species. In this paper we present our latest results concerning transport properties in the above classes of solids. Specifically, we focus on the filled skutterudites, half-Heusler alloys, and clathrates.

Enhanced thermoelectric figure of merit in p-type Ag-doped ZnSb nanostructured with Ag3Sb

2013 ◽  
Vol 69 (5) ◽  
pp. 397-400 ◽  
Author(s):  
Ding-Bang Xiong ◽  
Norihiko L. Okamoto ◽  
Haruyuki Inui
Keyword(s):  
Figure Of Merit ◽  
Thermoelectric Figure Of Merit ◽  
Thermoelectric Figure ◽  
P Type
Sign in / Sign up

Export Citation Format

Share Document