Phenyl-rich silicone oil as a precursor for SiOC anode materials for long-cycle and high-rate lithium ion batteries

2016 ◽  
Vol 4 (7) ◽  
pp. 2651-2656 ◽  
Author(s):  
Martin Halim ◽  
Chairul Hudaya ◽  
A-Young Kim ◽  
Joong Kee Lee
Keyword(s):  
Lithium Ion Batteries ◽  
Anode Material ◽  
Anode Materials ◽  
Silicone Oil ◽  
Lithium Ion ◽  
Reversible Capacity ◽  
Silicon Oxycarbide ◽  
High Rate ◽  
Long Cycle

Silicon oxycarbide (SiOC) is gaining increasing attention as a promising anode material for lithium ion batteries due to its higher reversible capacity compared to incumbent graphite.

A long-cycle and high-rate Si/SiOx/nitrogen-doped carbon composite as an anode material for lithium-ion batteries

2019 ◽  
Vol 43 (46) ◽  
pp. 18220-18228 ◽  
Author(s):  
Xiaoling He ◽  
Wei Zhao ◽  
Diandian Li ◽  
Peijun Cai ◽  
Quanchao Zhuang ◽  
...  
Keyword(s):  
Lithium Ion Batteries ◽  
Anode Material ◽  
High Performance ◽  
Lithium Ion ◽  
Carbon Composite ◽  
High Rate ◽  
Nitrogen Doped ◽  
Long Cycle ◽  
Nitrogen Doped Carbon

Silicon (Si) is proposed as a promising anode material in high-performance lithium-ion batteries (LIBs) due to its ultrahigh theoretical capacity.

Graphene Aerogels with Anchored Sub-Micrometer Mulberry-Like ZnO Particles for High-Rate and Long-Cycle Anode Materials in Lithium Ion Batteries

Small ◽  
2016 ◽  
Vol 12 (37) ◽  
pp. 5208-5216 ◽  
Author(s):  
Lishuang Fan ◽  
Yu Zhang ◽  
Qi Zhang ◽  
Xian Wu ◽  
Junhan Cheng ◽  
...  
Keyword(s):  
Lithium Ion Batteries ◽  
Anode Materials ◽  
Lithium Ion ◽  
High Rate ◽  
Long Cycle ◽  
Graphene Aerogels ◽  
Zno Particles

Polyoxometalate-based metallogels as anode materials for lithium ion batteries

2019 ◽  
Vol 48 (28) ◽  
pp. 10422-10426 ◽  
Author(s):  
Xing Meng ◽  
Hai-Ning Wang ◽  
Yan-Hong Zou ◽  
Lu-Song Wang ◽  
Zi-Yan Zhou
Keyword(s):  
Lithium Ion Batteries ◽  
Anode Materials ◽  
Rate Capability ◽  
Lithium Ion ◽  
Reversible Capacity ◽  
High Rate ◽  
High Rate Capability ◽  
High Reversible Capacity ◽  
First Time ◽  
Good Cycling Stability

POM-based metallogels are employed as anode materials for the first time, which exhibit high reversible capacity, high rate capability, and good cycling stability.

Preparation and Electrochemical Performance of SnO2/Graphite/Carbon Nanotube Composite Anode for Lithium-Ion Batteries

2010 ◽  
Vol 150-151 ◽  
pp. 1387-1390
Author(s):  
Cheng Zhao Yang ◽  
Guo Qing Zhang ◽  
Lei Zhang ◽  
Li Ma
Keyword(s):  
Carbon Nanotube ◽  
Lithium Ion Batteries ◽  
Anode Material ◽  
Anode Materials ◽  
Lithium Ion ◽  
Reversible Capacity ◽  
Pure Sno2 ◽  
Composite Anode ◽  
Carbon Nanotube Composite ◽  
Charge Discharge

A composite anode material of SnO2/graphite(GT)/carbon nanotube(CNT) for lithium-ion batteries was prepared by ball milling. It was observed that SnO2 particles were homogeneously embedded into the buffering matrix of graphite particles. This composite anode material showed an increased initial coulombic efficiencies of 56% in the first cycle, and after 25 charge–discharge cycles, a reversible capacity of 431 mAh/g was obtained, much higher than 282 mAh/g of SnO2/GT composite and 177 mAh/g of pure SnO2. The improvement in the electrochemical properties of the composite anode materials was mainly attributed to good electric conductivity of the CNT network and the excellent resiliency.

scholarly journals Biomass-Derived Graphitic Carbon Encapsulated Fe/Fe3C Composite as an Anode Material for High-Performance Lithium Ion Batteries

Energies ◽  
2020 ◽  
Vol 13 (4) ◽  
pp. 827 ◽  
Author(s):  
Ying Liu ◽  
Xueying Li ◽  
Anupriya K. Haridas ◽  
Yuanzheng Sun ◽  
Jungwon Heo ◽  
...  
Keyword(s):  
Lithium Ion Batteries ◽  
Anode Material ◽  
Anode Materials ◽  
Active Sites ◽  
High Performance ◽  
Lithium Ion ◽  
Reversible Capacity ◽  
Graphitic Carbon ◽  
Li Ion Batteries ◽  
Li Ion

Lithium ion (Li-ion) batteries have been widely applied to portable electronic devices and hybrid vehicles. In order to further enhance performance, the search for advanced anode materials to meet the growing demand for high-performance Li-ion batteries is significant. Fe3C as an anode material can contribute more capacity than its theoretical one due to the pseudocapacity on the interface. However, the traditional synthetic methods need harsh conditions, such as high temperature and hazardous and expensive chemical precursors. In this study, a graphitic carbon encapsulated Fe/Fe3C (denoted as Fe/Fe3C@GC) composite was synthesized as an anode active material for high-performance lithium ion batteries by a simple and cost-effective approach through co-pyrolysis of biomass and iron precursor. The graphitic carbon shell formed by the carbonization of sawdust can improve the electrical conductivity and accommodate volume expansion during discharging. The porous microstructure of the shell can also provide increased active sites for the redox reactions. The in-situ-formed Fe/Fe3C nanoparticles show pseudocapacitive behavior that increases the capacity. The composite exhibits a high reversible capacity and excellent rate performance. The composite delivered a high initial discharge capacity of 1027 mAh g−1 at 45 mA g−1 and maintained a reversible capacity of 302 mAh g−1 at 200 mA g−1 after 200 cycles. Even at the high current density of 5000 mA g−1, the Fe/Fe3C@GC cell also shows a stable cycling performance. Therefore, Fe/Fe3C@GC composite is considered as one of the potential anode materials for lithium ion batteries.

High-rate sodium insertion/extraction into silicon oxycarbide-reduced graphene oxide

2020 ◽  
Vol 44 (33) ◽  
pp. 14035-14040
Author(s):  
Rio Nugraha Putra ◽  
Martin Halim ◽  
Ghulam Ali ◽  
Shoyebmohamad F. Shaikh ◽  
Abdullah M. Al-Enizi ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Lithium Ion Batteries ◽  
Reduced Graphene Oxide ◽  
Rate Capability ◽  
Lithium Ion ◽  
Reversible Capacity ◽  
Silicon Oxycarbide ◽  
High Rate ◽  
High Rate Capability ◽  
Reduced Graphene

Silicone oxycarbide (SiOC) is gaining attention as a potential anode material for lithium-ion batteries due to its higher reversible capacity and high-rate capability.

MOF-derived mesoporous anatase TiO2 as anode material for lithium–ion batteries with high rate capability and long cycle stability

2016 ◽  
Vol 674 ◽  
pp. 174-178 ◽  
Author(s):  
Zhiliang Xiu ◽  
Muhammad Hilmy Alfaruqi ◽  
Jihyeon Gim ◽  
Jinju Song ◽  
Sungjin Kim ◽  
...  
Keyword(s):  
Lithium Ion Batteries ◽  
Anode Material ◽  
Rate Capability ◽  
Lithium Ion ◽  
Anatase Tio2 ◽  
High Rate ◽  
Cycle Stability ◽  
High Rate Capability ◽  
Long Cycle
Sign in / Sign up

Export Citation Format

Share Document