CuO promoted Mn2O3-based materials for solid fuel combustion with inherent CO2 capture

2015 ◽  
Vol 3 (19) ◽  
pp. 10545-10550 ◽  
Author(s):  
D. Hosseini ◽  
Q. Imtiaz ◽  
P. M. Abdala ◽  
S. Yoon ◽  
A. M. Kierzkowska ◽  
...  
Keyword(s):  
Co2 Capture ◽  
Solid Fuel ◽  
Oxygen Carrier ◽  
Fuel Combustion ◽  
Chemical Looping ◽  
Solid Fuel Combustion

A novel bimetallic Cu–Mn oxygen carrier for Chemical-Looping with Oxygen Uncoupling (CLOU) based CO2 capture.

Inherent CO2 Capture Using Chemical Looping Combustion in a Natural Gas Fired Power Cycle

2004 ◽  
Vol 126 (2) ◽  
pp. 316-321 ◽  
Author(s):  
O̸. Brandvoll ◽  
O. Bolland
Keyword(s):  
Metal Oxide ◽  
Co2 Capture ◽  
Exergy Analysis ◽  
Oxygen Carrier ◽  
Fuel Combustion ◽  
Chemical Looping Combustion ◽  
Chemical Looping ◽  
Conventional Combustion ◽  
Oxidation Reactor ◽  
Cycle Efficiency

In this paper an alternative to the so-called “oxy-fuel” combustion for CO2 capture is evaluated. “Chemical looping combustion” (CLC), is closely related to oxy-fuel combustion as the chemically bound oxygen reacts in a stoichiometric ratio with the fuel. In the CLC process the overall combustion reaction takes place in two reaction steps in two separate reactors. In the reduction reactor, the fuel is oxidized by the oxygen carrier, i.e., the metal oxide MeO. The metal oxide is reduced to a metal oxide with a lower oxidation number, Me, in the reaction with the fuel. In this manner, pure oxygen is supplied to the reaction with the fuel without using a traditional air separation plant, like cryogenic distillation of air. The paper presents a thermodynamic cycle analysis, where CLC is applied in a humid air turbine concept. Main parameters are identified, and these are varied to examine the influence on cycle efficiency. Results on cycle efficiency are presented and compared to other CO2 capture options. Further, an evaluation of the oxygen carrier, metals/oxides, is presented. An exergy analysis is carried out in order to understand where losses occur, and to explain the difference between CLC and conventional combustion. The oxidation reactor air inlet temperature and the oxidation reactor exhaust temperature have a significant impact on the overall efficiency. This can be attributed to the controlling effect of these parameters on the required airflow rate. An optimum efficiency of 55.9% has been found for a given set of input parameters. Crucial issues of oxygen carrier durability, chemical performance, and mechanical properties have been idealized, and further research on the feasibility of CLC is needed. Whether or not the assumption 100% gas conversion holds, is a crucial issue and remains to be determined experimentally. Successful long-term operation of chemical looping systems of this particular type has not yet been demonstrated. The simulation points out a very promising potential of CLC as a power/heat generating method with inherent capture of CO2. Exergy analysis show reduced irreversibilities for CLC compared to conventional combustion. Simulations of this type will prove useful in designing CLC systems in the future when promizing oxygen carriers have been investigated in more detail .

ChemInform Abstract: Some Remarks on Direct Solid Fuel Combustion Using Chemical Looping Processes

ChemInform ◽  
2013 ◽  
Vol 44 (30) ◽  
pp. no-no
Author(s):  
Liang Zeng ◽  
Mandar V. Kathe ◽  
Elena Y. Chung ◽  
Liang-Shih Fan
Keyword(s):  
Solid Fuel ◽  
Fuel Combustion ◽  
Chemical Looping ◽  
Solid Fuel Combustion ◽  
Direct Solid

Some remarks on direct solid fuel combustion using chemical looping processes

2012 ◽  
Vol 1 (3) ◽  
pp. 290-295 ◽  
Author(s):  
Liang Zeng ◽  
Mandar V Kathe ◽  
Elena Y Chung ◽  
Liang-Shih Fan
Keyword(s):  
Solid Fuel ◽  
Fuel Combustion ◽  
Chemical Looping ◽  
Solid Fuel Combustion ◽  
Direct Solid

Chemical Looping Combustion-Analysis of Natural Gas Fired Power Cycles With Inherent CO2 Capture

2004 ◽  
Author(s):  
Rehan Naqvi ◽  
Olav Bolland ◽  
O̸yvind Brandvoll ◽  
Kaare Helle
Keyword(s):  
Metal Oxide ◽  
Co2 Capture ◽  
Oxygen Carrier ◽  
Fuel Combustion ◽  
Combined Cycle ◽  
Reactor System ◽  
Chemical Looping Combustion ◽  
Chemical Looping ◽  
Turbine Cooling ◽  
Steam Cycle

In this paper an alternative to so-called ‘oxy-fuel’ combustion has been evaluated. Chemical Looping Combustion (CLC) is an innovative concept of CO2 capture from combustion of fossil fuels in power plants. CLC is closely related to oxy-fuel combustion as the chemically bound oxygen reacts in a stoichiometric ratio with the fuel. In CLC, the overall combustion takes place in two steps. In a reduction reactor fuel is oxidised by the oxygen carrier i.e. the metal oxide MeO which is reduced to metal oxide with a lower oxidation number, Me. Me flows to an oxidation reactor where it is oxidised by oxygen in the air. In this way pure oxygen is supplied to fuel without using an energy intensive traditional air separation unit. This paper presents thermodynamic cycle analysis of a CLC-power plant. A steady-state model has been developed for the solid-gas reactions occurring in the reactor system. The model is applied to analyse the system under two configurations; a combined cycle and a conventional steam cycle. A turbine-cooling model has also been implemented to evaluate the turbine cooling penalty in the combined cycle configuration. Effects of exhaust recirculation for coking prevention and incomplete fuel conversion have also been investigated. Performance of the oxygen carrier has been idealised except for the degrees of reduction and oxidation. Energy needs for CO2 capture have properly been taken into account. The results show that an optimum efficiency of 49.7% can be achieved under given conditions with a CLC-combined cycle at zero emissions level. With turbine cooling, efficiency falls by 1.2% points under the same conditions. The CLC-steam cycle is capable of achieving 40.1% efficiency with zero emissions. The results show that CLC has high potential for power generation with inherent CO2 capture. This work will be useful in designing CLC systems after the reactor system has been analysed experimentally for long-term operations.

Inherent CO2 Capture Using Chemical Looping Combustion in a Natural Gas Fired Power Cycle

2002 ◽  
Author(s):  
O̸yvind Brandvoll ◽  
Olav Bolland
Keyword(s):  
Metal Oxide ◽  
Co2 Capture ◽  
Exergy Analysis ◽  
Oxygen Carrier ◽  
Fuel Combustion ◽  
Chemical Looping Combustion ◽  
Chemical Looping ◽  
Conventional Combustion ◽  
Oxidation Reactor ◽  
Cycle Efficiency

In this paper an alternative to the so-called “oxy-fuel” combustion for CO2 capture is evaluated. “Chemical looping combustion” (CLC), is closely related to oxy-fuel combustion as the chemically bound oxygen reacts in a stoichiometric ratio with the fuel. In the CLC process the overall combustion reaction takes place in two reaction steps in two separate reactors. In the reduction reactor, the fuel is oxidised by the oxygen carrier, i.e. the metal oxide MeO. The metal oxide is reduced to a metal oxide with a lower oxidation number, Me, in the reaction with the fuel. In this manner, pure oxygen is supplied to the reaction with the fuel without using a traditional air separation plant, like cryogenic distillation of air. The paper presents a thermodynamic cycle analysis, where CLC is applied in a Humid Air Turbine concept. Main parameters are identified, and these are varied to examine the influence on cycle efficiency. Results on cycle efficiency are presented and compared to other CO2 capture options. Further, an evaluation of the oxygen carrier, metals/oxides, is presented. An exergy analysis is carried out in order to understand where losses occur, and to explain the difference between CLC and conventional combustion. The oxidation reactor air inlet temperature and the oxidation reactor exhaust temperature have a significant impact on the overall efficiency. This can be attributed to the controlling effect of these parameters on the required airflow rate. An optimum efficiency of 55.9% has been found for a given set of input parameters. Crucial issues of oxygen carrier durability, chemical performance and mechanical properties have been idealized, and further research on the feasibility of CLC is needed. Whether or not the assumption 100% gas conversion holds, is a crucial issue and remains to be determined experimentally. Successful long-term operation of chemical looping systems of this particular type has not yet been demonstrated. The simulation points out a very promising potential of CLC as a power/heat generating method with inherent capture of CO2. Exergy analysis show reduced irreversibilities for CLC compared to conventional combustion. Simulations of this type will prove useful in designing CLC systems in the future when promising oxygen carriers have been investigated in more detail.

Modeling of Solid Fuel Combustion in Furnaces with a Circulating Fluidized Bed

2008 ◽  
Vol 39 (1) ◽  
pp. 65-78
Author(s):  
Yu. S. Teplitskii ◽  
V. A. Borodulya ◽  
V. I. Kovenskii ◽  
E. P. Nogotov
Keyword(s):  
Fluidized Bed ◽  
Solid Fuel ◽  
Circulating Fluidized Bed ◽  
Fuel Combustion ◽  
Solid Fuel Combustion

FLUE GAS PURIFICATION FROM SULFUR OXIDES AND ASH DURING SOLID FUEL COMBUSTION IN LOW-POWER BOILERS

2020 ◽  
Vol 21 (4) ◽  
pp. 355-374
Author(s):  
S. V. Plashykhin ◽  
T. V. Bojko ◽  
D. N. Skladannyy ◽  
Ju. A. Zaporozhets ◽  
Artem S. Safiants
Keyword(s):  
Low Power ◽  
Solid Fuel ◽  
Flue Gas ◽  
Fuel Combustion ◽  
Sulfur Oxides ◽  
Gas Purification ◽  
Solid Fuel Combustion ◽  
Flue Gas Purification

Investigation of Turbulent Pulverized Solid Fuel Combustion with Detailed Homogeneous and Heterogeneous Kinetics

2021 ◽  
Author(s):  
Bosen Wang ◽  
Ali Shamooni ◽  
Oliver T. Stein ◽  
Andreas Kronenburg ◽  
Andreas M. Kempf ◽  
...  
Keyword(s):  
Solid Fuel ◽  
Fuel Combustion ◽  
Heterogeneous Kinetics ◽  
Solid Fuel Combustion

scholarly journals Using PM2.5 concentrations to estimate the health burden from solid fuel combustion, with application to Irish and Scottish homes

2013 ◽  
Vol 12 (1) ◽  
Author(s):  
Karen S Galea ◽  
J Fintan Hurley ◽  
Hilary Cowie ◽  
Amy L Shafrir ◽  
Araceli Sánchez Jiménez ◽  
...  
Keyword(s):  
Solid Fuel ◽  
Fuel Combustion ◽  
Health Burden ◽  
Solid Fuel Combustion
Sign in / Sign up

Export Citation Format

Share Document