scholarly journals Novel 3DOM BiVO4/TiO2 nanocomposites for highly enhanced photocatalytic activity

2015 ◽  
Vol 3 (42) ◽  
pp. 21244-21256 ◽  
Author(s):  
Meryam Zalfani ◽  
Benoit van der Schueren ◽  
Zhi-Yi Hu ◽  
Joanna C. Rooke ◽  
Ramzi Bourguiga ◽  
...  
Keyword(s):  
Photocatalytic Activity ◽  
Visible Light ◽  
Photocatalytic Performance ◽  
High Energy ◽  
Inverse Opal ◽  
High Energy Electrons ◽  
Inverse Opal Structure ◽  
Long Lifetime

BiVO4 nanoparticles in the 3DOM TiO2 inverse opal structure act as a sensitizer to absorb visible light and to transfer efficiently high energy electrons to TiO2 to ensure long lifetime of photogenerated charges and keep them well separated, explaining the extraordinarily high photocatalytic performance of 3DOM BiVO4/TiO2 nanocomposites.

Black TiO2 inverse opals for visible-light photocatalysis

RSC Advances ◽  
2015 ◽  
Vol 5 (88) ◽  
pp. 71547-71550 ◽  
Author(s):  
Linlin Xin ◽  
Xuefeng Liu
Keyword(s):  
Titanium Dioxide ◽  
Photocatalytic Activity ◽  
Visible Light ◽  
Visible Light Photocatalysis ◽  
Inverse Opal ◽  
Inverse Opals ◽  
Inverse Opal Structure ◽  
Black Tio2

The combination of chemical hydrogenation and well-ordered inverse opal structure provides black titanium dioxide (TiO2) inverse opals (BTIOs) with a better photocatalytic activity under visible light.

Tuning the Photocatalytic Performance of Plasmonic Nanocomposites (ZnO/Aux) Driven in Visible Light

2019 ◽  
Vol 8 (1) ◽  
pp. 56-61
Author(s):  
Aneeya K. Samantara ◽  
Debasrita Dash ◽  
Dipti L. Bhuyan ◽  
Namita Dalai ◽  
Bijayalaxmi Jena
Keyword(s):  
Electron Transfer ◽  
Photocatalytic Activity ◽  
Visible Light ◽  
Transfer Rate ◽  
Photocatalytic Performance ◽  
Light Exposure ◽  
Au Nanoparticle ◽  
Electron Transfer Rate ◽  
Au Nps ◽  
Zno Nanostructure

: In this article, we explored the possibility of controlling the reactivity of ZnO nanostructures by modifying its surface with gold nanoparticles (Au NPs). By varying the concentration of Au with different wt% (x = 0.01, 0.05, 0.08, 1 and 2), we have synthesized a series of (ZnO/Aux) nanocomposites (NCs). A thorough investigation of the photocatalytic performance of different wt% of Au NPs on ZnO nanosurface has been carried out. It was observed that ZnO/Au0.08 nanocomposite showed the highest photocatalytic activity among all concentrations of Au on the ZnO surface, which degrades the dye concentration within 2 minutes of visible light exposure. It was further revealed that with an increase in the size of plasmonic nanoparticles beyond 0.08%, the accessible surface area of the Au nanoparticle decreases. The photon absorption capacity of Au nanoparticle decreases beyond 0.08% resulting in a decrease in electron transfer rate from Au to ZnO and a decrease of photocatalytic activity. Background: Due to the industrialization process, most of the toxic materials go into the water bodies, affecting the water and our ecological system. The conventional techniques to remove dyes are expensive and inefficient. Recently, heterogeneous semiconductor materials like TiO2 and ZnO have been regarded as potential candidates for the removal of dye from the water system. Objective: To investigate the photocatalytic performance of different wt% of Au NPs on ZnO nanosurface and the effect of the size of Au NPs for photocatalytic performance in the degradation process. Methods: A facile microwave method has been adopted for the synthesis of ZnO nanostructure followed by a reduction of gold salt in the presence of ZnO nanostructure to form the composite. Results: ZnO/Au0.08 nanocomposite showed the highest photocatalytic activity which degrades the dye concentration within 2 minutes of visible light exposure. The schematic mechanism of electron transfer rate was discussed. Conclusion: Raspberry shaped ZnO nanoparticles modified with different percentages of Au NPs showed good photocatalytic behavior in the degradation of dye molecules. The synergetic effect of unique morphology of ZnO and well anchored Au nanostructures plays a crucial role.

scholarly journals Enhanced Visible-Light Photocatalytic Performance of SAPO-5-Based g-C3N4 Composite for Rhodamine B (RhB) Degradation

Materials ◽  
2019 ◽  
Vol 12 (23) ◽  
pp. 3948
Author(s):  
Lingfang Qiu ◽  
Zhiwei Zhou ◽  
Mengfan Ma ◽  
Ping Li ◽  
Jinyong Lu ◽  
...  
Keyword(s):  
Photocatalytic Activity ◽  
Visible Light ◽  
Redox Reactions ◽  
Photocatalytic Performance ◽  
Dye Degradation ◽  
Thermal Polymerization ◽  
Light Illumination ◽  
Electron Hole ◽  
Visible Light Illumination ◽  
Visible Light Photocatalytic

Novel visible-light responded aluminosilicophosphate-5 (SAPO-5)/g-C3N4 composite has been easily constructed by thermal polymerization for the mixture of SAPO-5, NH4Cl, and dicyandiamide. The photocatalytic activity of SAPO-5/g-C3N4 is evaluated by degrading RhB (30 mg/L) under visible light illumination (λ > 420 nm). The effects of SAPO-5 incorporation proportion and initial RhB concentration on the photocatalytic performance have been discussed in detail. The optimized SAPO-5/g-C3N4 composite shows promising degradation efficiency which is 40.6% higher than that of pure g-C3N4. The degradation rate improves from 0.007 min−1 to 0.022 min−1, which is a comparable photocatalytic performance compared with other g-C3N4-based heterojunctions for dye degradation. The migration of photo-induced electrons from g-C3N4 to the Al site of SAPO-5 should promote the photo-induced electron-hole pairs separation rate of g-C3N4 efficiently. Furthermore, the redox reactions for RhB degradation occur on the photo-induced holes in the g-C3N4 and Al sites in SAPO-5, respectively. This achievement not only improves the photocatalytic activity of g-C3N4 efficiently, but also broadens the application of SAPOs in the photocatalytic field.

CdS/Ag2S/g-C3N4 ternary composites with superior photocatalytic performance for hydrogen evolution under visible light irradiation

2021 ◽  
Vol 50 (9) ◽  
pp. 3253-3260 ◽  
Author(s):  
Shan Zhao ◽  
Junbiao Wu ◽  
Yan Xu ◽  
Xia Zhang ◽  
Yide Han ◽  
...  
Keyword(s):  
Photocatalytic Activity ◽  
Visible Light ◽  
Hydrogen Evolution ◽  
Visible Light Irradiation ◽  
Photocatalytic Performance ◽  
Light Irradiation ◽  
Synergic Effect

CdS/Ag2S/g-C3N4 ternary composites showed excellent photocatalytic performance toward H2 evolution. Their improved photocatalytic activity could be attributed not only to the synergic effect, but also to the introduction of Ag2S.

scholarly journals Fabrication of Novel Cyanuric Acid Modified g-C3N4/Kaolinite Composite with Enhanced Visible Light-Driven Photocatalytic Activity

Minerals ◽  
2018 ◽  
Vol 8 (10) ◽  
pp. 437 ◽  
Author(s):  
Zhiming Sun ◽  
Fang Yuan ◽  
Xue Li ◽  
Chunquan Li ◽  
Jie Xu ◽  
...  
Keyword(s):  
Photocatalytic Activity ◽  
Visible Light ◽  
Photocatalytic Performance ◽  
Cyanuric Acid ◽  
Degradation Mechanism ◽  
Organic Pollutant ◽  
Photogenerated Electron ◽  
Light Illumination ◽  
Acid Modification ◽  
Visible Light Driven

A novel kind of cyanuric-acid-modified graphitic carbon nitride (g-C3N4)/kaolinite (m-CN/KA) composite with enhanced visible light-driven photocatalytic performance was fabricated through a facile two-step process. Rhodamine B (RhB) was taken as the target pollutant to study the photocatalytic performance of the synthesized catalysts. It is indicated that the cyanuric acid modification significantly enhanced photocatalytic activity under visible light illumination in comparison with the other reference samples. The apparent rate constant of m-CN/KA is almost 1.9 times and 4.0 times those of g-C3N4/kaolinite and bare g-C3N4, respectively. The superior photocatalytic performance of m-CN/KA could be ascribed, not only to the generation of abundant pore structure and reactive sites, but also to the efficient separation of the photogenerated electron-hole pairs. Furthermore, the possible photocatalytic degradation mechanism of m-CN/KA was also presented in this paper. It could be anticipated that this novel and efficient, metal-free, mineral-based photocatalytic composite has great application prospects in organic pollutant degradation.

Enhanced photocatalytic performance of BiOBr/NH2-MIL-125(Ti) composite for dye degradation under visible light

2016 ◽  
Vol 45 (43) ◽  
pp. 17521-17529 ◽  
Author(s):  
Shuai-Ru Zhu ◽  
Peng-Fei Liu ◽  
Meng-Ke Wu ◽  
Wen-Na Zhao ◽  
Guo-Chang Li ◽  
...  
Keyword(s):  
Photocatalytic Activity ◽  
Visible Light ◽  
Photocatalytic Performance ◽  
Dye Degradation ◽  
Composite Photocatalysts

BiOBr/NH2-MIL-125(Ti) composite photocatalysts have been prepared by incorporating NH2-MIL-125(Ti) with BiOBr and exhibited improved photocatalytic activity under visible light compared to pristine BiOBr and NH2-MIL-125(Ti).

Preparation of annular TiO2 nanoparticles constructed by high-energy surfaces and enhanced visible-light photocatalytic activity

2017 ◽  
Vol 41 (15) ◽  
pp. 7562-7570 ◽  
Author(s):  
Fanxia Kong ◽  
Yuguo Xia ◽  
Xiuling Jiao ◽  
Dairong Chen
Keyword(s):  
Photocatalytic Activity ◽  
Visible Light ◽  
Tio2 Nanoparticles ◽  
High Energy ◽  
Etching Process ◽  
Visible Light Photocatalytic Activity ◽  
Energy Surfaces ◽  
Visible Light Photocatalytic

Annular TiO2 nanoparticles were synthesized through a combined solvothermal and etching process.

Enhanced visible light and photocatalytic performance of TiO2 nanotubes by hydrogenation at lower temperature

RSC Advances ◽  
2016 ◽  
Vol 6 (8) ◽  
pp. 6643-6650 ◽  
Author(s):  
Lijuan Han ◽  
Zheng Ma ◽  
Zhihe Luo ◽  
Gang Liu ◽  
Jiantai Ma ◽  
...  
Keyword(s):  
Photocatalytic Activity ◽  
Visible Light ◽  
Light Absorption ◽  
Tio2 Nanotubes ◽  
Photocatalytic Performance ◽  
Lower Temperature

The precursor with nanotubes structure can be hydrogenated easily in lower temperature comparing with nanobelts. The light absorption and photocatalytic activity of hydrogenated TiO2 nanotubes were enhanced drastically.

Sign in / Sign up

Export Citation Format

Share Document