scholarly journals Formulation and preparation of stable cross-linked alginate–zinc nanoparticles in the presence of a monovalent salt

Soft Matter ◽  
2015 ◽  
Vol 11 (28) ◽  
pp. 5765-5774 ◽  
Author(s):  
Sara Pistone ◽  
Dafina Qoragllu ◽  
Gro Smistad ◽  
Marianne Hiorth

Stable alginate nanoparticles have been prepared for the first time by ionic cross-linking with a divalent cation through a simple one-step method. The mechanism of formation was identified.

1975 ◽  
Vol 23 (3) ◽  
pp. 200-207 ◽  
Author(s):  
D M Boorsma ◽  
G L Kalsbeek

In this study we compared horseradish peroxidase (HRP)-labeled rabbit antihuman immunoglobulin G (IgG) conjugates, prepared by a one-step and a two-step method. Glutaraldehyde was used as a cross-linking agent. Two methods were used for removing unconjugated HRP: Sephadex G-200 gel chromatography and ammonium sulfate precipitation. The conjugates were characterized immunologically, immunochemically and enzymatically. The immunohistoenzymic properties of the conjugates were tested on unfixed cryostat sections of the skin of patients with chronic discoid lupus erythematosus. The influence of the presence of unconjugated HRP and unconjugated IgG was studied. Optimal results were obtained with conjugates prepared by a two-step method. Removing unconjugated HRPimproved the immunohistoenzymic properties of the conjugates. Conjugated and unconjugated IgG could be separated by Sephadex G-200 gel chromatography.


2007 ◽  
Vol 47 (7) ◽  
pp. 1004-1008 ◽  
Author(s):  
Shujing Yang ◽  
Guojun Song ◽  
Yunguo Zhao ◽  
Chao Yang ◽  
Xilin She
Keyword(s):  

2020 ◽  
Vol 22 (3) ◽  
pp. 678-687 ◽  
Author(s):  
Ravi P. Pandey ◽  
Kashif Rasool ◽  
P. Abdul Rasheed ◽  
Tricia Gomez ◽  
Mujaheed Pasha ◽  
...  
Keyword(s):  
One Step ◽  

Herein, renewable and uniform nanospheres based on chitosan (CS) and lignosulfonate (LS): (CS@LS) were designed for the first time through a simple one-step covalent cross-linking protocol.


2021 ◽  
Author(s):  
Chunlei Yang ◽  
Na Gao ◽  
Yazhou Liu ◽  
Hengzhi Zhao ◽  
Jing Jing ◽  
...  

We synthesized SiNPs by a one-step method and established, for the first time, a novel SiNP-based nanoprobe (denoted as SiNPs/OPD/HRP/GOx) for ratiometric fluorescence and visual detection of glucose in serum samples.


Author(s):  
Sara Basile ◽  
Essyrose Mathew ◽  
Ida Genta ◽  
Bice Conti ◽  
Rossella Dorati ◽  
...  

Abstract3D printing has provided a new prospective in the manufacturing of personalized medical implants, including fistulas for haemodialysis (HD). In the current study, an optimized fused modelling deposition (FDM) 3D printing method has been validated, for the first time, to obtain cylindrical shaped fistulas. Printing parameters were evaluated for the manufacturing of fistulas using blank and 0.25% curcumin-loaded filaments that were produced by hot melt extrusion (HME). Four different fistula types have been designed and characterized using a variety of physicochemical characterization methods. Each design was printed three times to demonstrate printing process accuracy considering outer and inner diameter, wall thickness, width, and length. A thermoplastic polyurethane (TPU) biocompatible elastomer was chosen, showing good mechanical properties with a high elastic modulus and maximum elongation, as well as stability at high temperatures with less than 0.8% of degradation at the range between 25 and 250 °C. Curcumin release profile has been evaluated in a saline buffer, obtaining a low release (12%) and demonstrating drug could continue release for a longer period, and for as long as grafts should remain in patient body. Possibility to produce drug-loaded grafts using one-step method as well as 3D printing process and TPU filaments containing curcumin printability has been demonstrated. Graphical abstract


2020 ◽  
Vol 12 (7) ◽  
pp. 849-862
Author(s):  
Yuri S. Pestovsky ◽  
Teerapol Srichana

Tetrachloroaurate reduction with α-, β-, and γ-cyclodextrin at pH 10.56 was studied in this study by dual-angle dynamic light scattering and spectrophotometry. The nanoparticles were also characterized by scanning electron microscopy. In contrast with our previous study, the nanoparticles were purified by centrifugation prior to characterization. The reaction is considered to be a promising one-step method for preparation of gold nanoparticles with immobilized cyclodextrins without the need for seeding. Unlike in our previous study, the reaction mixture was boiled under reflux conditions instead of an open vial. This change sped up the reaction, and extensive aggregation was avoided. For the first time, this study demonstrated that all three cyclodextrins were able to reduce tetrachloroaurate at room temperature as well, but long incubation periods were necessary. This is the first publication discussing the mechanism of tetrachloroaurate reduction by cyclodextrins. The first stage of the reaction involved tetrachloroaurate hydrolysis despite presence of hydrochloric acid in the commercial preparation of tetrachloroauric acid (HAuCl4). Tetrachloroaurate was therefore the precursor but not the actual oxidant. The previous hypothesis on autocatalytic decarboxylation of cyclodextrins was therefore proven wrong. Particle growth was accompanied by nucleation, leading to coexistence of nanoparticles and nanoclusters. The resulting nanoparticles contained a small fraction of aggregates, probably because of sodium chloride generated from hydrochloric acid. However, besides playing this detrimental role, chloride ions facilitated nucleation by stabilizing gold intermediates. The nanoparticles solutions could be stored at least for three months, which contrasted with our previous work, where the nanoparticles were stable for only three days. For the first time, freeze-drying and reconstitution of the resulting nanoparticles were investigated, and they were shown to be free from aggregation. The synthesized gold nanoparticles are recommended for use as drug carriers.


NANO ◽  
2015 ◽  
Vol 10 (08) ◽  
pp. 1550119 ◽  
Author(s):  
Hongbin Chen ◽  
Wangmiao Fu ◽  
Xiang Yu ◽  
Yi Zhu ◽  
Hui Meng ◽  
...  

A facile one-step method was developed for the first time to fabricate BiOCl film on Cu substrate by simply dipping the Cu substrate in the mixed solution containing HCl, glycol, H2O2 and BiCl3. This method shows the advantages of a simple technique, uniform and controllable morphology, as well as easy mass production. The absorption capacity of BiOCl film was investigated by adsorption of Rhodamine B and Congo red (CR) and their maximum adsorption capacities were 1667[Formula: see text]mg[Formula: see text]g[Formula: see text] and 1429[Formula: see text]mg[Formula: see text]g[Formula: see text], respectively. The negative values of free energy and the positive values of enthalpy suggested that the adsorption were spontaneous and endothermic, respectively. Moreover, both adsorptions were matched with the pseudo-second-order equation. This film could be reused and the recycle rates for Rhodamine B and CR were still about 95% and 75% after five cycles, respectively. The adsorption mechanism revealed that hydrogen bond mainly accounted for the adsorption of dyes.


2017 ◽  
Vol 5 (23) ◽  
pp. 11873-11881 ◽  
Author(s):  
Jiajun Mao ◽  
Mingzheng Ge ◽  
Jianying Huang ◽  
Yuekun Lai ◽  
Changjian Lin ◽  
...  

We first time report a general strategy for one-step fabrication of a ZIF-8 MOF/RGO hydrogel, with the synergistic effects of chemical reduction and cross-linking by metal ions.


1993 ◽  
Vol 58 (11) ◽  
pp. 2642-2650 ◽  
Author(s):  
Zdeněk Kruliš ◽  
Ivan Fortelný ◽  
Josef Kovář

The effect of dynamic curing of PP/EPDM blends with sulfur and thiuram disulfide systems on their mechanical properties was studied. The results were interpreted using the knowledge of the formation of phase structure in the blends during their melt mixing. It was shown, that a sufficiently slow curing reaction is necessary if a high impact strength is to be obtained. Only in such case, a fine and homogeneous dispersion of elastomer can be formed, which is the necessary condition for high impact strength of the blend. Using an inhibitor of curing in the system and a one-step method of dynamic curing leads to an increase in impact strength of blends. From the comparison of shear modulus and impact strength values, it follows that, at the stiffness, the dynamically cured blends have higher impact strength than the uncured ones.


Sign in / Sign up

Export Citation Format

Share Document