Highly stable Ni/SiC catalyst modified by Al2O3 for CO methanation reaction

RSC Advances ◽  
2016 ◽  
Vol 6 (12) ◽  
pp. 9631-9639 ◽  
Author(s):  
Guojing Jin ◽  
Fangna Gu ◽  
Qing Liu ◽  
Xiaoyan Wang ◽  
Lihua Jia ◽  
...  
Keyword(s):  
Catalytic Activity ◽  
Heat Conductivity ◽  
Co Methanation ◽  
Methanation Reaction ◽  
Good Catalytic Activity

Ni/Al2O3–SiC exhibits good catalytic activity and stability due to excellent heat conductivity of SiC and enhanced interactions between Ni and support by alumina modification, thus inhibiting the migration of Ni particles.

Effects of preparation method and Sm2O3 promoter on CO methanation by a mesoporous NiO–Sm2O3/Al2O3 catalyst

2018 ◽  
Vol 42 (15) ◽  
pp. 13096-13106 ◽  
Author(s):  
Qing Liu ◽  
Hongyuan Yang ◽  
Hao Dong ◽  
Wei Zhang ◽  
Bing Bian ◽  
...  
Keyword(s):  
Catalytic Activity ◽  
Preparation Method ◽  
High Catalytic Activity ◽  
Co Methanation ◽  
Methanation Reaction ◽  
Ordered Mesoporous ◽  
Al2o3 Catalyst

Well-dispersed Ni and Sm2O3 nanoparticles embedded in an ordered mesoporous Al2O3 material simultaneously exhibit high catalytic activity and stability for the CO methanation reaction.

High resolution electron microscopy of lanthanum phosphate crystals

1978 ◽  
Vol 36 (1) ◽  
pp. 274-275
Author(s):  
J. C. Wheatley ◽  
J. M. Cowley
Keyword(s):  
Electron Microscopy ◽  
Catalytic Activity ◽  
High Resolution ◽  
Petroleum Industry ◽  
High Resolution Electron Microscopy ◽  
Lanthanum Phosphate ◽  
Good Catalyst ◽  
Resolution Electron ◽  
Good Catalytic Activity ◽  
Physical And Chemical

Rare-earth phosphates are of particular interest because of their catalytic properties associated with the hydrolysis of many aromatic chlorides in the petroleum industry. Lanthanum phosphates (LaPO4) which have been doped with small amounts of copper have shown increased catalytic activity (1). However the physical and chemical characteristics of the samples leading to good catalytic activity are not known.Many catalysts are amorphous and thus do not easily lend themselves to methods of investigation which would include electron microscopy. However, the LaPO4, crystals are quite suitable samples for high resolution techniques.The samples used were obtained from William L. Kehl of Gulf Research and Development Company. The electron microscopy was carried out on a JEOL JEM-100B which had been modified for high resolution microscopy (2). Standard high resolution techniques were employed. Three different sample types were observed: 669A-1-5-7 (poor catalyst), H-L-2 (good catalyst) and 27-011 (good catalyst).

scholarly journals CO Oxidation Efficiency and Hysteresis Behavior over Mesoporous Pd/SiO2 Catalyst

Catalysts ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 131 ◽  
Author(s):  
Rola Mohammad Al Soubaihi ◽  
Khaled Mohammad Saoud ◽  
Myo Tay Zar Myint ◽  
Mats A. Göthelid ◽  
Joydeep Dutta
Keyword(s):  
Carbon Monoxide ◽  
Catalytic Activity ◽  
Co Oxidation ◽  
Active Sites ◽  
Bond Activation ◽  
Dissociative Adsorption ◽  
High Catalytic Activity ◽  
Good Catalytic Activity ◽  
Pretreatment Conditions ◽  
Oxidation Efficiency

Carbon monoxide (CO) oxidation is considered an important reaction in heterogeneous industrial catalysis and has been extensively studied. Pd supported on SiO2 aerogel catalysts exhibit good catalytic activity toward this reaction owing to their CO bond activation capability and thermal stability. Pd/SiO2 catalysts were investigated using carbon monoxide (CO) oxidation as a model reaction. The catalyst becomes active, and the conversion increases after the temperature reaches the ignition temperature (Tig). A normal hysteresis in carbon monoxide (CO) oxidation has been observed, where the catalysts continue to exhibit high catalytic activity (CO conversion remains at 100%) during the extinction even at temperatures lower than Tig. The catalyst was characterized using BET, TEM, XPS, TGA-DSC, and FTIR. In this work, the influence of pretreatment conditions and stability of the active sites on the catalytic activity and hysteresis is presented. The CO oxidation on the Pd/SiO2 catalyst has been attributed to the dissociative adsorption of molecular oxygen and the activation of the C-O bond, followed by diffusion of adsorbates at Tig to form CO2. Whereas, the hysteresis has been explained by the enhanced stability of the active site caused by thermal effects, pretreatment conditions, Pd-SiO2 support interaction, and PdO formation and decomposition.

scholarly journals Palladium-Supported Zirconia-Based Catalytic Degradation of Rhodamine-B Dye from Wastewater

Water ◽  
2021 ◽  
Vol 13 (11) ◽  
pp. 1522
Author(s):  
Salma Jabeen ◽  
Muhammad Sufaid Khan ◽  
Rozina Khattak ◽  
Ivar Zekker ◽  
Juris Burlakovs ◽  
...  
Keyword(s):  
Catalytic Activity ◽  
Rhodamine B ◽  
Dye Degradation ◽  
Freundlich Isotherm ◽  
Impregnation Method ◽  
K Value ◽  
First Order Kinetics ◽  
Good Catalytic Activity ◽  
Rhodamine B Dye ◽  
Best Fit

The catalytic activity of Pd/ZrO2 was studied in terms of the degradation of rhodamine-B dye in the presence of hydrogen peroxide. Pd/ZrO2 was prepared by impregnation method, calcined at 750 °C and characterized by XRD, SEM and EDX. The catalyst showed good catalytic activity for dye degradation at 333 K, using 0.05 g of the catalyst during 5 h. The reaction kinetics followed the pseudo-first order kinetics. The Freundlich, Langmuir and Temkin isotherms were applied to the data and the best fit was obtained with Freundlich isotherm. Thermodynamic parameters, like ΔH, ΔG and ΔS were also calculated. The negative values of ΔH (−291.406 KJ/mol) and Gibbs free energy (ΔG) showed the exothermic and spontaneous nature of the process. The positive ΔS (0.04832 KJ/mol K) value showed suitable affinity of catalyst for dye degradation. The catalyst was very stable, active and was easily separated from the reaction mixture by filtration. It can be concluded from the results that the prepared catalyst could be effectively used in dyes degradation/removal from water subjected to further validation and use for various dyes.

scholarly journals Transformation of 2-Butene into Propene on WO3/MCM-48: Metathesis and Isomerization of n-Butene

Catalysts ◽  
2018 ◽  
Vol 8 (12) ◽  
pp. 585 ◽  
Author(s):  
Derun Hua ◽  
Zheng Zhou ◽  
Qianqian Hua ◽  
Jian Li ◽  
Xinning Lu ◽  
...  
Keyword(s):  
Catalytic Activity ◽  
High Temperatures ◽  
Thermodynamic Analysis ◽  
Reaction Temperature ◽  
Thermodynamic Calculations ◽  
Metathesis Reaction ◽  
Good Catalytic Activity

The metathesis of 2-butene (Trans and Cis) to propene was investigated over W-based catalysts. Thermodynamic calculations for metathesis and isomerization were carried out at various temperatures to test the reactions. The results showed that the WO3/MCM-48 catalyst had good catalytic activity. The metathesis activity depended on the acidity of the catalyst and the dispersity of the WO3 on the supports. High temperatures promoted the isomerization of 2-butene to 1-butene. According to thermodynamic analysis, however, this is adverse to the metathesis reaction, making it important to determine an appropriate reaction temperature.

Synthesis, Characterization, and Crystal Structure of Several Novel Acidic Ionic Liquids: 1-ethyl-2-alkyl-benzimidazolium Tetra-Fluoroborate

2013 ◽  
Vol 457-458 ◽  
pp. 139-143 ◽  
Author(s):  
Ming Tian Wang ◽  
Chang Ping Pan ◽  
Wei Peng Gai ◽  
Xiao Xia Lv ◽  
Min Gang Zhai ◽  
...  
Keyword(s):  
Crystal Structure ◽  
Ionic Liquid ◽  
Acetic Acid ◽  
Catalytic Activity ◽  
Lamellar Structure ◽  
X Ray Diffraction ◽  
X Ray ◽  
Acidic Ionic Liquid ◽  
Acidic Ionic Liquids ◽  
Good Catalytic Activity

A series of novel acidic ionic liquid: 1-ethyl-2-alkyl-benzimidazolium tetra-fluoroborate (alkyl= Et, Pr-n, Bu-n) were prepared by simple acid-based neutralization of 1-ethyl-2-alkyl-benzimidazole and tetrafluoroboric acid. The compounds were characterized by FTIR spectra, elemental analysis,1HNMR spectra and thermogravimetric analysis. These novel tetra-fluoroborate salts show good catalytic activity to esterification of benzyl alcohol and acetic acid. Furthermore, a crystal of ([H-ebBiBF4) was prepared with the crystal structure and determined by X-ray diffraction analysis. The molecular is of lamellar structure as mainly π electron ring is stacked interleaving between two layers. The results of cation and anion arranged orderly in pair indicate that the coulombic attraction is more dominant. Simultaneously, the weak local hydrogen bonds C-H···F exist in the molecules.

Efficient UV-vis-IR photothermocatalytic selective ethanol oxidation on MnOx/TiO2 nanocomposites significantly enhanced by a novel photoactivation

2020 ◽  
Vol 8 (3) ◽  
pp. 1254-1264 ◽  
Author(s):  
Yi Yang ◽  
Shaowen Wu ◽  
Yuanzhi Li ◽  
Qian Zhang ◽  
Xiujian Zhao
Keyword(s):  
Activation Energy ◽  
Catalytic Activity ◽  
Ethanol Oxidation ◽  
Good Catalytic Activity

MnOx/TiO2 nanocomposites exhibit good catalytic activity and excellent durability for photothermocatalytic selective ethanol oxidation under UV-vis-IR and IR irradiation. A novel photoactivation is found to significantly enhance catalytic activity due to activation energy being reduced upon irradiation.

New palladium(ii) complexes with 3-(2-pyridyl)-5-alkyl-1,2,4-triazole ligands as recyclable C–C coupling catalysts

2019 ◽  
Vol 43 (27) ◽  
pp. 10973-10984 ◽  
Author(s):  
Borys V. Zakharchenko ◽  
Dmytro M. Khomenko ◽  
Roman O. Doroshchuk ◽  
Ilona V. Raspertova ◽  
Viktoriia S. Starova ◽  
...  
Keyword(s):  
Catalytic Activity ◽  
Good Catalytic Activity

Compounds 4a–d revealed good catalytic activity and prospects for use as mesomorphic materials.

Catalytic Properties of Ni/CNTs and Ca-Promoted Ni/CNTs for Methanation Reaction of Carbon Dioxide

2014 ◽  
Vol 924 ◽  
pp. 217-226 ◽  
Author(s):  
Xiang Feng Hu ◽  
Wen Yang ◽  
Ning Wang ◽  
Shi Zhong Luo ◽  
Wei Chu
Keyword(s):  
Carbon Dioxide ◽  
Carbon Nanotubes ◽  
Catalytic Activity ◽  
Catalytic Properties ◽  
Supported Catalyst ◽  
Catalytic Performance ◽  
Impregnation Method ◽  
Methanation Reaction ◽  
Ni Species ◽  
Nickel Species

Nickel/carbon nanotubes (Ni/CNTs), Nickel/alumina (Ni/Al2O3), calcium-promoted Ni/CNTs and calcium-promoted Ni/Al2O3 were synthesized by impregnation method. Methanation of carbon dioxide was used as a probe to evaluate their catalytic performance. The features of these Ni-based catalysts were investigated via XRD, H2-TPR, H2-TPD and the N2 adsorptiondesorption isotherms. H2-TPR showed that nickel species on Ni/CNTs was reduced more easily with respect to that on Ni/Al2O3, and addition of Ca can increase the content of easily reducible Ni species for Ni/CNTs. XRD and H2-TPD indicated that addition of Ca promoted dispersion for CNTs-supported catalyst. These finding ultimately enhanced catalytic activity and stability for Ni/CNTs catalyst modified with Ca.

Sign in / Sign up

Export Citation Format

Share Document