Facile synthesis of magnetic Fe3O4/CeCO3OH composites with excellent adsorption capability for small cationic dyes

RSC Advances ◽  
2015 ◽  
Vol 5 (114) ◽  
pp. 94397-94404 ◽  
Author(s):  
Keyan Li ◽  
Fanfan Chai ◽  
Yongqin Zhao ◽  
Xinwen Guo
Keyword(s):  
Adsorption Capacity ◽  
Cationic Dyes ◽  
Maximum Adsorption Capacity ◽  
Facile Synthesis ◽  
Hydrothermal Route ◽  
One Step ◽  
Adsorption Capability ◽  
Magnetic Fe3o4

A magnetic Fe3O4/CeCO3OH composite prepared through a one-step hydrothermal route exhibits maximum adsorption capacity of 666.2 mg g−1 for MB.

scholarly journals Hydrothermal Conversion of Red Mud into Magnetic Adsorbent for Effective Adsorption of Zn(II) in Water

2019 ◽  
Vol 9 (8) ◽  
pp. 1519 ◽  
Author(s):  
Wenqing Dong ◽  
Kun Liang ◽  
Yanyi Qin ◽  
Huijia Ma ◽  
Xuan Zhao ◽  
...  
Keyword(s):  
Ascorbic Acid ◽  
Adsorption Capacity ◽  
Red Mud ◽  
Maximum Adsorption Capacity ◽  
Magnetic Adsorbent ◽  
Hydrothermal Route ◽  
Hydrothermal Temperature ◽  
Facile Hydrothermal Route ◽  
Average Distribution ◽  
The Aluminum Industry

Red mud, a Fe-rich waste generated from the aluminum industry, was recovered as an adsorbent for wastewater treatment. The separation process of red mud from water after adsorption, including centrifugation and filtration, was complicated. This study demonstrated an alternative option to recycle red mud for preparing magnetic adsorbent via a facile hydrothermal route using ascorbic acid as reductant. Red mud is weakly magnetized and consists of andradite, muscovite, hematite, and cancrinite. After hydrothermal treatment, andradite in red mud was reductively dissolved by ascorbic acid, and transformed into magnetite and morimotoite. With increasing hydrothermal temperature, the dissolution of andradite accelerated, and the crystallite size of magnetite increased. When the hydrothermal temperature reached 200 °C, the prepared adsorbent P-200 showed a desirable saturation magnetization of 4.1 Am2/kg, and could be easily magnetically separated from water after adsorption. The maximum adsorption capacity of P-200 for Zn2+ was 89.6 mg/g, which is eight-fold higher than that of the raw red mud. The adsorption of Zn2+ by P-200 fitted the Langmuir model, where cation exchange was the main adsorption mechanism. The average distribution coefficient of Zn2+ at low ppm level was 16.81 L/g for P-200, higher than those of the red mud (0.3 L/g) and the prepared P-120 (1.48 L/g) and P-270 (5.48 L/g), demonstrating that P-200 had the best adsorption capacity for Zn2+ and can be served as a practical adsorbent for real-world applications. To our knowledge, this is the first study to report the conversion of red mud into a magnetic adsorbent under mild conditions.

scholarly journals Efficient Removal of Diclofenac from Aqueous Solution by Potassium Ferrate-Activated Porous Graphitic Biochar: Ambient Condition Influences and Adsorption Mechanism

2019 ◽  
Vol 17 (1) ◽  
pp. 291 ◽  
Author(s):  
Nguyen Thi Minh Tam ◽  
Yunguo Liu ◽  
Hassan Bashir ◽  
Zhihong Yin ◽  
Yuan He ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Adsorption Capacity ◽  
Diclofenac Sodium ◽  
Maximum Adsorption Capacity ◽  
Potassium Ferrate ◽  
Solution Ph ◽  
Modified Biochar ◽  
Prepared Material ◽  
Endothermic Process ◽  
One Step

Porous graphitic biochar was synthesized by one-step treatment biomass using potassium ferrate (K2FeO4) as activator for both carbonization and graphitization processes. The modified biochar (Fe@BC) was applied for the removal of diclofenac sodium (DCF) in an aqueous solution. The as-prepared material possesses a well-developed micro/mesoporous and graphitic structure, which can strengthen its adsorption capacity towards DCF. The experimental results indicated that the maximum adsorption capacity (qmax) of Fe@BC for DCF obtained from Langmuir isotherm simulation was 123.45 mg·L−1 and it was a remarkable value of DCF adsorption in comparison with that of other biomass-based adsorbents previously reported. Thermodynamic quality and effect of ionic strength studies demonstrated that the adsorption was a endothermic process, and higher environmental temperatures may be more favorable for the uptake of DCF onto Fe@BC surface; however, the presence of NaCl in the solution slightly obstructed DCF adsorption. Adsorption capacity was found to be decreased with the increase of solution pH. Additionally, the possible mechanism of the DCF adsorption process on Fe@BC may involve chemical adsorption with the presence of H-bonding and π–π interaction. With high adsorption capacity and reusability, Fe@BC was found to be a promising absorbent for DCF removal from water as well as for water purification applications.

scholarly journals Facile synthesis of graphene wool doped with oleylamine-capped silver nanoparticles (GW-αAgNPs) for water treatment applications

2021 ◽  
Vol 11 (11) ◽  
Author(s):  
Adedapo O. Adeola ◽  
Gugu Kubheka ◽  
Evans M. N. Chirwa ◽  
Patricia B. C. Forbes
Keyword(s):  
Silver Nanoparticles ◽  
Organic Matter ◽  
Adsorption Capacity ◽  
Natural Organic Matter ◽  
Elevated Temperatures ◽  
Maximum Adsorption Capacity ◽  
Facile Synthesis ◽  
Gram Positive ◽  
Gram Negative ◽  
Process Economics

AbstractThe facile synthesis of graphene wool doped with oleylamine-capped silver nanoparticles (GW-αAgNP) was achieved in this study. The effect of concentration, pH, temperature and natural organic matter (NOM) on the adsorption of a human carcinogen (benzo(a)pyrene, BaP) was evaluated using the doped graphene wool adsorbent. Furthermore, the antibacterial potential of GW-αAgNP against selected drug-resistant Gram-negative and Gram-positive bacteria strains was evaluated. Isotherm data revealed that adsorption of BaP by GW-αAgNP was best described by a multilayer adsorption mechanism predicted by Freundlich model with least ERRSQ < 0.79. The doping of graphene wool with hydrophobic AgNPs coated with functional moieties significantly increased the maximum adsorption capacity of GW-αAgNP over GW based on the qmax and qm predicted by Langmuir and Sips models. π-π interactions contributed to sorbent-sorbate interaction, due to the presence of delocalized electrons. GW-αAgNP-BaP interaction is a spontaneous exothermic process (negative $$\Delta H^\circ$$ Δ H ∘ and $$\Delta G)$$ Δ G ) , with better removal efficiency in the absence of natural organic matter (NOM). While GW is more feasible with higher maximum adsorption capacity (qm) at elevated temperatures, GW-αAgNP adsorption capacity and efficiency is best at ambient temperature, in the absence of natural organic matter (NOM), and preferable in terms of energy demands and process economics. GW-αAgNP significantly inhibited the growth of Gram-negative Pseudomonas aeruginosa and Gram-positive Bacillus subtilis strains, at 1000 mg/L dosage in preliminary tests, which provides the rationale for future evaluation of this hybrid material as a smart solution to chemical and microbiological water pollution.

scholarly journals Ce-doped UiO-67 nanocrystals with improved adsorption property for removal of organic dyes

RSC Advances ◽  
2019 ◽  
Vol 9 (47) ◽  
pp. 27674-27683 ◽  
Author(s):  
Xue Dong ◽  
Yongcen Lin ◽  
Yuqin Ma ◽  
Lang Zhao
Keyword(s):  
Adsorption Capacity ◽  
Hydrothermal Method ◽  
Negative Charge ◽  
Organic Dyes ◽  
Adsorption Property ◽  
Cationic Dyes ◽  
High Adsorption ◽  
One Step ◽  
High Adsorption Capacity

The Ce-doped UiO-67 nanocrystals were successfully synthesized via a one-step hydrothermal method. Ce doping increases the negative charge on the surface of the material, thus the adsorbent exhibits high adsorption capacity to cationic dyes.

Magnetic Fe3O4 nanoparticles for adsorptive removal of acid dye (new coccine) from aqueous solutions

2010 ◽  
Vol 62 (4) ◽  
pp. 844-851 ◽  
Author(s):  
Chih-Huang Weng ◽  
Yao-Tung Lin ◽  
Chia-Ling Yeh ◽  
Y. C. Sharma
Keyword(s):  
Ionic Strength ◽  
Aqueous Solutions ◽  
Adsorption Capacity ◽  
Fe3o4 Nanoparticles ◽  
Average Particle Size ◽  
Precipitation Method ◽  
Maximum Adsorption Capacity ◽  
Average Particle ◽  
Magnetic Fe3o4 Nanoparticles ◽  
Magnetic Fe3o4

The ability of magnetic Fe3O4 nanoparticles (MFN) to remove new coccine (NC), an acidic dye, from aqueous solutions was studied. Parameters including ionic strength, pH, and temperature were evaluated. MFN, prepared by precipitation method, exhibits an average particle size of 12.5 nm, specific surface area of 85.5 m2/g, and pHzpc of 5.9. Results of kinetic adsorption experiments indicated that the pseudo-second-order rate of adsorption increased with increasing initial NC concentration. Findings also revealed that the equilibrium data could be fitted into Langmuir adsorption isotherm. The adsorption is favored at low pH, high temperature, and low ionic strength, whereupon a maximum adsorption capacity of 1.11 × 10−4 mol/g was determined for NC. Thermodynamic functions indicated that the adsorption process is spontaneous and exothermic in nature. Tests of regeneration showed that after 5 regeneration cycles the adsorption capacity of NC decreased to 35% to its original capacity.

One-step facile synthesis of mesoporous graphene/Fe 3 O 4 /chitosan nanocomposite and its adsorption capacity for a textile dye

2016 ◽  
Vol 9 ◽  
pp. 170-178 ◽  
Author(s):  
Nguyen Van Hoa ◽  
Thang Trung Khong ◽  
Tran Thi Hoang Quyen ◽  
Trang Si Trung
Keyword(s):  
Adsorption Capacity ◽  
Textile Dye ◽  
Facile Synthesis ◽  
One Step

Utilization of Waste of Enzymes Biomass as Biosorbent for the Removal of Dyes from Aqueous Solution in Batch and Fluidized Bed Column

2020 ◽  
Vol 71 (1) ◽  
pp. 1-12
Author(s):  
Salman H. Abbas ◽  
Younis M. Younis ◽  
Mohammed K. Hussain ◽  
Firas Hashim Kamar ◽  
Gheorghe Nechifor ◽  
...  
Keyword(s):  
Experimental Data ◽  
Aqueous Solution ◽  
Particle Size ◽  
Adsorption Capacity ◽  
Fluidized Bed ◽  
Flow Rate ◽  
Fungal Biomass ◽  
Solution Flow Rate ◽  
Maximum Adsorption Capacity ◽  
Solution Flow

The biosorption performance of both batch and liquid-solid fluidized bed operations of dead fungal biomass type (Agaricusbisporus ) for removal of methylene blue from aqueous solution was investigated. In batch system, the adsorption capacity and removal efficiency of dead fungal biomass were evaluated. In fluidized bed system, the experiments were conducted to study the effects of important parameters such as particle size (701-1400�m), initial dye concentration(10-100 mg/L), bed depth (5-15 cm) and solution flow rate (5-20 ml/min) on breakthrough curves. In batch method, the experimental data was modeled using several models (Langmuir,Freundlich, Temkin and Dubinin-Radushkviechmodels) to study equilibrium isotherms, the experimental data followed Langmuir model and the results showed that the maximum adsorption capacity obtained was (28.90, 24.15, 21.23 mg/g) at mean particle size (0.786, 0.935, 1.280 mm) respectively. In Fluidized-bed method, the results show that the total ion uptake and the overall capacity will be decreased with increasing flow rate and increased with increasing initial concentrations, bed depth and decreasing particle size.

Sign in / Sign up

Export Citation Format

Share Document