A water-soluble antimicrobial acrylamide copolymer containing sulfitobetaine for enhanced oil recovery

RSC Advances ◽  
2015 ◽  
Vol 5 (64) ◽  
pp. 51549-51558 ◽  
Author(s):  
Shaohua Gou ◽  
Yang He ◽  
Yongtao Ma ◽  
Shan Luo ◽  
Qin Zhang ◽  
...  
Keyword(s):  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
Water Soluble ◽  
Application Potential

A novel antimicrobial copolymer containing sulfitobetaine is studied and has excellent application potential in EOR.

Design of Tailor-Made Water-Soluble Copolymers for Enhanced Oil Recovery Polymer Flooding Applications

2016 ◽  
Vol 11 (1) ◽  
Author(s):  
Marzieh Riahinezhad ◽  
Laura Romero-Zerón ◽  
Neil McManus ◽  
Alexander Penlidis
Keyword(s):  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
Polymer Flooding ◽  
Water Soluble

Improving the Viscosity of Partially Hydrolyzed Polyacrylamide (PHPAM) Solution for Enhanced Oil Recovery (EOR) Application

2021 ◽  
Vol 874 ◽  
pp. 45-49
Author(s):  
Ihsan Arifin ◽  
Grandprix Thomryes Marth Kadja ◽  
Cynthia L. Radiman
Keyword(s):  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
Average Molecular Weight ◽  
Monomer Concentration ◽  
Water Soluble ◽  
Water Soluble Polymer ◽  
Produce Water ◽  
Water Soluble Polymers ◽  
Hydrolysis Method ◽  
Hydrolyzed Polyacrylamide

Enhanced Oil Recovery (EOR) is a promising technology for increasing crude oil production, especially from old wells. Polymer flooding is one of the techniques used in EOR in which the water-soluble polymer is added to increase the viscosity of the injected fluid. However, this technique has not been implemented in Indonesia due to the unavailability of locally-synthesized polymers. Therefore, this research aims to synthesize polyacrylamides and their partially-hydrolyzed derivatives and to study the possibility of their utilization for the EOR application. Various polymerization conditions using potassium persulfate (KPS) as initiators have been realized and the resulting polymers were characterized using FTIR spectroscopy and rheology measurement. It was found that higher monomer concentration resulted in higher viscosity-average molecular weight of polyacrylamide. Further study revealed that the hydrolysis of polyacrylamide by alkaline solution significantly increased the viscosity of 1000 ppm solution from 1.5 to 145.40 cP at room temperature, which is comparable to one of the commercial products. These results showed that the simple synthesis and hydrolysis method could be effectively used to produce water-soluble polymers for the EOR application.

scholarly journals New insights into guar gum as environmentally friendly polymer for enhanced oil recovery in high-salinity and high-temperature sandstone reservoirs

2021 ◽  
Vol 11 (4) ◽  
pp. 1905-1913
Author(s):  
Tagwa A. Musa ◽  
Ahmed F. Ibrahim ◽  
Hisham A. Nasr-El-Din ◽  
Anas. M. Hassan
Keyword(s):  
High Temperature ◽  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
Guar Gum ◽  
High Salinity ◽  
Environmentally Friendly ◽  
Water Soluble ◽  
Natural Polymer ◽  
Soluble Polymer ◽  
Water Soluble Polymer

AbstractChemical enhanced oil recovery (EOR) processes are usually used as additives for hydrocarbon production due to its simplicity and relatively reasonable additional production costs. Polymer flooding uses polymer solutions to increase oil recovery by decreasing the water/oil mobility ratio by increasing the viscosity of the displacing water. The commonly used synthetic water-soluble polymer in EOR application is partially hydrolyzed polyacrylamide (HPAM). However, synthetic polymers in general are not attractive because of high cost, environmental concerns, limitation in high temperature, and high-salinity environment. Guar gum is an environmentally friendly natural water-soluble polymer available in large quantities in many countries and widely used in various applications in the oil and gas industry especially in drilling fluids and hydraulic fracturing operations; however, very limited studies investigated on guar as a polymer for EOR and no any study investigated on its uses in high-temperature and high -salinity reservoirs. The objective of this study is to confirm the use of guar gum as a natural polymer for EOR applications in sandstone reservoirs and investigate its applicability for high-temperature and high-salinity reservoirs. The study experimentally investigated rheological characteristics of a natural polymer obtained from guar gum with consideration of high temperature (up to 210 °F) and high salinity (up to 20% NaCl) and tested the guar solution as EOR polymer. The results of this study show that the guar solution can be used as an environmentally friendly polymer to enhance oil recovery. Based on the results, it can be concluded that guar gum shows shear-thinning behavior and strongly susceptible to microbial degradation but also shows a very good properties stability in high temperature and salinity, where in low shear rate case, about 100 cp viscosity can be achieved at 210 °F for polymer prepared in deionized water. Guar polymer shows good viscosity in the presence of 20% NaCl where the viscosity is acceptable for temperature less than 190 °F. Also, the flooding experiment shows that the recovery factor can be increased by 16%.

Chemical Enhanced Oil Recovery With Water Soluble Poly Ionic Liquids in Carbonate Reservoirs

2018 ◽  
Author(s):  
Saud N. Alhussinan ◽  
Hamdan Q. Alyami ◽  
Naif B. Alqahtani ◽  
Abdulrahman A. AlQuraishi
Keyword(s):  
Ionic Liquids ◽  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
Water Soluble ◽  
Carbonate Reservoirs ◽  
Soluble Poly

A novel water-soluble hydrophobically associating polyacrylamide based on oleic imidazoline and sulfonate for enhanced oil recovery

2015 ◽  
Vol 39 (10) ◽  
pp. 7805-7814 ◽  
Author(s):  
Shaohua Gou ◽  
Shan Luo ◽  
Tongyi Liu ◽  
Peng Zhao ◽  
Yang He ◽  
...  
Keyword(s):  
Rheological Properties ◽  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
Water Soluble ◽  
Hydrophobically Associating Polyacrylamide ◽  
Hydrophobically Associating

We report here a novel imidazoline functionalized hydrophobically associating copolymer that exhibits excellent rheological properties and outstanding potential for enhanced oil recovery.

scholarly journals Synthesis and Evaluation of a Water-Soluble Hyperbranched Polymer as Enhanced Oil Recovery Chemical

2013 ◽  
Vol 2013 ◽  
pp. 1-11 ◽  
Author(s):  
Nanjun Lai ◽  
Xiaoping Qin ◽  
Zhongbin Ye ◽  
Qin Peng ◽  
Yan Zhang ◽  
...  
Keyword(s):  
Nmr Spectroscopy ◽  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
Hyperbranched Polymer ◽  
Raw Materials ◽  
Retention Rate ◽  
Water Soluble ◽  
Core Flooding ◽  
H Nmr ◽  
Initiation System

A novel hyperbranched polymer was synthesized using acrylamide (AM), acrylic acid (AA),N-vinyl-2-pyrrolidone (NVP), and dendrite functional monomer as raw materials by redox initiation system in an aqueous medium. The hyperbranched polymer was characterized by infrared (IR) spectroscopy,1H NMR spectroscopy,13C NMR spectroscopy, elemental analysis, and scanning electron microscope (SEM). The viscosity retention rate of the hyperbranched polymer was 22.89% higher than that of the AM/AA copolymer (HPAM) at 95°C, and the viscosity retention rate was 8.17%, 12.49%, and 13.68% higher than that of HPAM in 18000 mg/L NaCl, 1800 mg/L CaCl2, and 1800 mg/L MgCl2·6H2O brine, respectively. The hyperbranched polymer exhibited higher apparent viscosity (25.2 mPa·s versus 8.1 mPa·s) under 500 s−1shear rate at 80°C. Furthermore, the enhanced oil recovery (EOR) of 1500 mg/L hyperbranched polymer solutions was up to 23.51% by the core flooding test at 80°C.

Water-soluble allyl and diallyl camphor sulfonamides-based polyacrylamide copolymers for enhanced oil recovery

2014 ◽  
Vol 132 (2) ◽  
Author(s):  
Shaohua Gou ◽  
Ting Yin ◽  
Zhongbin Ye ◽  
Wenchao Jiang ◽  
Cheng Yang ◽  
...  
Keyword(s):  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
Water Soluble
Sign in / Sign up

Export Citation Format

Share Document