Balanced strength and ductility improvement of in situ crosslinked polylactide/poly(ethylene terephthalate glycol) blends

RSC Advances ◽  
2015 ◽  
Vol 5 (44) ◽  
pp. 34821-34830 ◽  
Author(s):  
Rui-Ying Bao ◽  
Wen-Rou Jiang ◽  
Zheng-Ying Liu ◽  
Wei Yang ◽  
Bang-Hu Xie ◽  
...  
Keyword(s):  
Ethylene Terephthalate ◽  
Melt Blending ◽  
Poly Ethylene Terephthalate ◽  
Poly Ethylene ◽  
Reactive Melt ◽  
Strength And Ductility

Polylactide/poly(ethylene terephthalate glycol) (PLA/PETG) blends with balanced strength and ductility improvement were achieved by crosslinking of PLA matrix and interfacial compatibilization via reactive melt blending.

Properties of Polymer Alloy Fibers of Polypropylene and Cationic Dyeable Poly(ethylene Terephthalate) Prepared with an in-situ Generated Compatibilizer

2001 ◽  
Vol 71 (12) ◽  
pp. 1053-1056 ◽  
Author(s):  
Yoichiro Muraoka ◽  
Tomoko Fujiwara ◽  
Yoshiyuki Sano ◽  
Tokugen Yasuda ◽  
Hajime Kanbara
Keyword(s):  
Ethylene Terephthalate ◽  
Poly Ethylene Terephthalate ◽  
Polymer Alloy ◽  
Poly Ethylene

scholarly journals Interfacial Adhesion and Mechanical Properties of PET Fabric/PVC Composites Enhanced by SiO2/Tributyl Citrate Hybrid Sizing

Nanomaterials ◽  
2018 ◽  
Vol 8 (11) ◽  
pp. 898
Author(s):  
Dandan Pu ◽  
Fuyao Liu ◽  
Yubing Dong ◽  
Qingqing Ni ◽  
Yaqin Fu
Keyword(s):  
Interfacial Adhesion ◽  
Ethylene Terephthalate ◽  
Sio2 Nanoparticles ◽  
New Approach ◽  
Pet Fabric ◽  
Poly Ethylene Terephthalate ◽  
Wide Range ◽  
Peeling Strength ◽  
Poly Ethylene

Poly(ethylene terephthalate) (PET) fabric-reinforced polyvinyl chloride (PVC) composites have a wide range of applications, but the interface bonding of PET fabric/PVC composites has remained a challenge. In this work, a new in-situ SiO2/tributyl citrate sizing agent was synthesized according to the principle of “similar compatibility.” The developed sizing agent was used as a PET surface modifier to enhance the interfacial performance of PET fabric/PVC composites. The morphology and structure of the PET filaments, the wettability and tensile properties of the PET fabric, the interfacial adhesion, and the tensile and tearing properties of the PET fabric/PVC composites were investigated. Experimental results showed that many SiO2 nanoparticles were scattered on the surface of the modified PET filaments. Moreover, the surface roughness of the modified PET filaments remarkably increased in comparison with that of the untreated PET filaments. The contact angle of the modified PET filaments was also smaller than that of the untreated ones. The peeling strength of the modified PET fabrics/PVC composites was 0.663 N/mm, which increased by 62.50% in comparison with the peeling strength of the untreated ones (0.408 N/mm). This work provides a new approach to the surface modification of PET and improves the properties of PET fabric/PVC composites.

scholarly journals Effects of Phase Morphology on Mechanical Properties: Oriented/Unoriented PP Crystal Combination with Spherical/Microfibrillar PET Phase

Polymers ◽  
2019 ◽  
Vol 11 (2) ◽  
pp. 248 ◽  
Author(s):  
Dashan Mi ◽  
Yingxiong Wang ◽  
Maja Kuzmanovic ◽  
Laurens Delva ◽  
Yixin Jiang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Impact Strength ◽  
Ethylene Terephthalate ◽  
Phase Morphology ◽  
Mechanical Recycling ◽  
Immiscible Blends ◽  
Poly Ethylene Terephthalate ◽  
Poly Ethylene ◽  
The Impact

In situ microfibrillation and multiflow vibrate injection molding (MFVIM) technologies were combined to control the phase morphology of blended polypropylene (PP) and poly(ethylene terephthalate) (PET), wherein PP is the majority phase. Four kinds of phase structures were formed using different processing methods. As the PET content changes, the best choice of phase structure also changes. When the PP matrix is unoriented, oriented microfibrillar PET can increase the mechanical properties at an appropriate PET content. However, if the PP matrix is an oriented structure (shish-kebab), only the use of unoriented spherical PET can significantly improve the impact strength. Besides this, the compatibilizer polyolefin grafted maleic anhydride (POE-g-MA) can cover the PET in either spherical or microfibrillar shape to form a core–shell structure, which tends to improve both the yield and impact strength. We focused on the influence of all composing aspects—fibrillation of the dispersed PET, PP matrix crystalline morphology, and compatibilized interface—on the mechanical properties of PP/PET blends as well as potential synergies between these components. Overall, we provided a theoretical basis for the mechanical recycling of immiscible blends.

Preparation and Characterization of Flame Retardant PET Fiber via Melt Blending

2018 ◽  
Vol 913 ◽  
pp. 729-737
Author(s):  
Hui Ling Xu ◽  
Hong Kun Bao ◽  
Chao Sheng Wang ◽  
Hua Ping Wang
Keyword(s):  
Flame Retardant ◽  
Ethylene Terephthalate ◽  
Carbon Layer ◽  
Melt Blending ◽  
Fiber Fracture ◽  
Limiting Oxygen Index ◽  
Poly Ethylene Terephthalate ◽  
Blending Method ◽  
Poly Ethylene

Poly(ethylene terephthalate) (PET) fiber with excellent flame retardant property was prepared with introducing a containing phosphorus flame retardant 10-(2’,5’-dihydroxyphenyl) -9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (ODOPB) into PET by melt blending method. The intrinsic viscosity of the modified PET was decreased after melt blending, indicated that ODOPB could promote the degradation of PET. The addition of ODOPB can increase the amount of carbon residue of PET, which can effectively reduce the heat transfer. The movement and regularity of PET molecular chain are affected by ODOPB, resulting in the reducing of the crystallization of PET. The Raman curves indicate that the addition of ODOPB can improve the regularity of carbon layer, which is conducive to achieve the effect of flame retardant. When the mass fraction of P is 0.7 %, the limiting oxygen index of sample reaches 32.4% and UL-94 vertical reaches V-2, the fiber fracture strength is 2.6 cN/dtex, which has excellent flame retardant and mechanical properties.

In Situ High Temperature X-Ray Diffraction Studies of Modified Poly(Ethylene Terephthalate)

1992 ◽  
Vol 36 ◽  
pp. 379-386
Author(s):  
T. Blanton ◽  
R. Seyler
Keyword(s):  
High Temperature ◽  
Ethylene Terephthalate ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
X Ray Scattering ◽  
Poly Ethylene Terephthalate ◽  
Poly Ethylene ◽  
Pet Crystallization

The effect of dimethyl-5-sodiosulfoisophthalate, SIP, on poly(ethylene terephthalate), PET, crystallization has been studied using in situ high-temperature x-ray diffraction, HTXRD. At low levels of SIP modification, PET-like crystallinity was observed. At high SIP levels, clustering of polyester ionomers was observed and crystallization was significantly suppressed. The HTXRD data along with differential scanning calorimetry, DSC, and small angle x-ray scattering, SAXS, indicate that the change from bulk crystallization to bulk ionomer formation occurred when 8-12 mol% of the diester linkages contained SIP.

Sign in / Sign up

Export Citation Format

Share Document