Beaded structured CNTs-Fe3O4@C with low Fe3O4 content as anode materials with extra enhanced performances in lithium ion batteries

RSC Advances ◽  
2015 ◽  
Vol 5 (37) ◽  
pp. 28864-28869 ◽  
Author(s):  
Yuan Xu ◽  
Jingdong Feng ◽  
Xuecheng Chen ◽  
Krzysztof Kierzek ◽  
Wenbin Liu ◽  
...  
Keyword(s):  
Lithium Ion Batteries ◽  
Lithium Ion Battery ◽  
Anode Materials ◽  
Lithium Ion ◽  
Reproducible Method

A simple, effective and reproducible method has been carried out for synthesis of CNT-Fe2O3 and CNT-Fe3O4@C beaded structures for lithium ion battery.

scholarly journals Green Anodes by Bamboo Based Material for Lithium-Ion Batteries: A Review.

2021 ◽  
pp. 759-764
Author(s):  
Dr. Pratap Patil ◽  
Amey Mhaskar ◽  
Gauri Kalyankar ◽  
Devanshi Garg
Keyword(s):  
Green Synthesis ◽  
Lithium Ion Batteries ◽  
Lithium Ion Battery ◽  
Anode Materials ◽  
Lithium Ion ◽  
Green Energy ◽  
Energy Resources ◽  
Complex Problems ◽  
Battery Anode

New green energy resources are substitutes for conventional sources of energy. Conventional sources of energy are a threat to the environment. Scrapping these out with bamboo-based batteries. We are working on the principle of green synthesis wherein non-toxic and biosafe agents are used to provide ingenious solutions to complex problems. A study of various bamboo-based lithium-ion battery anode materials has been attempted through the characterizations. The purpose of this work is to give collective access of the different attempts for the users.

Single step synthesized three dimensional spindle-like nanoclusters as lithium-ion battery anodes

CrystEngComm ◽  
2018 ◽  
Vol 20 (22) ◽  
pp. 3043-3048 ◽  
Author(s):  
Lingyu Zhang ◽  
Zhigang Gao ◽  
Haiming Xie ◽  
Chungang Wang ◽  
Lu Li ◽  
...  
Keyword(s):  
Lithium Ion Batteries ◽  
Lithium Ion Battery ◽  
Anode Materials ◽  
Three Dimensional ◽  
Lithium Ion ◽  
Single Step ◽  
Conventional Heating ◽  
Heating Method ◽  
3D Architecture ◽  
One Step

A facile, green, mild and one-step conventional heating method was developed to synthesize monodisperse Sn-doped Fe2O3 nanoclusters with a novel spindle-like 3D architecture as anode materials for lithium-ion batteries.

Designing superior solid electrolyte interfaces on silicon anodes for high-performance lithium-ion batteries

Nanoscale ◽  
2019 ◽  
Vol 11 (41) ◽  
pp. 19086-19104 ◽  
Author(s):  
Yaguang Zhang ◽  
Ning Du ◽  
Deren Yang
Keyword(s):  
Solid Electrolyte ◽  
Lithium Ion Batteries ◽  
Lithium Ion Battery ◽  
Anode Materials ◽  
High Performance ◽  
Lithium Ion ◽  
Passivation Layer ◽  
Solid Electrolyte Interface ◽  
Silicon Anodes ◽  
Electrolyte Interface

The solid electrolyte interface (SEI) is a passivation layer formed on the surface of lithium-ion battery (LIB) anode materials produced by electrolyte decomposition.

A new Dirac nodal-ring semimetal made of 3D cross-linked graphene networks as lithium ion battery anode materials

Nanoscale ◽  
2020 ◽  
Vol 12 (24) ◽  
pp. 12985-12992
Author(s):  
Shuaiwei Wang ◽  
Zhilong Peng ◽  
Daining Fang ◽  
Shaohua Chen
Keyword(s):  
Lithium Ion Batteries ◽  
Lithium Ion Battery ◽  
Anode Material ◽  
Anode Materials ◽  
Lithium Ion ◽  
Battery Anode

A Dirac nodal-ring semimetal made of cross-linked graphene networks for use as an anode material in lithium ion batteries.

Achieving high energy density for lithium-ion battery anodes by Si/C nanostructure design

2019 ◽  
Vol 7 (5) ◽  
pp. 2165-2171 ◽  
Author(s):  
Xingshuai Lv ◽  
Wei Wei ◽  
Baibiao Huang ◽  
Ying Dai
Keyword(s):  
Energy Density ◽  
Lithium Ion Batteries ◽  
Lithium Ion Battery ◽  
Anode Materials ◽  
Lithium Ion ◽  
High Energy ◽  
High Energy Density

Siligraphenes including g-SiC2 and g-SiC3 can be promising candidates as anode materials for lithium-ion batteries.

Hierarchical porous hollow FeFe(CN)6 nanospheres wrapped with I-doped graphene as anode materials for lithium-ion batteries

2019 ◽  
Vol 48 (12) ◽  
pp. 4058-4066 ◽  
Author(s):  
Zhengxin Ren ◽  
Die Hu ◽  
Xiannan Zhang ◽  
Dan Liu ◽  
Cheng Wang
Keyword(s):  
Lithium Ion Batteries ◽  
Lithium Ion Battery ◽  
Anode Materials ◽  
Chemical Etching ◽  
Lithium Ion ◽  
Hierarchical Porous ◽  
Doped Graphene

Hierarchical porous hollow FeFe(CN)6 nanospheres were synthesized via a facile anisotropic chemical etching route and integrated with I-doped graphene (IG) to form FeFe(CN)6@IG composites, which were used as anode materials for the lithium-ion battery (LIB) and exhibited high specific capacities, excellent rate properties, and superior cycling stabilities.

Intercalation Lithium Behavior of Molybdenum Disulphide as Anode Materials for Lithium Ion Battery

2011 ◽  
Vol 335-336 ◽  
pp. 218-221
Author(s):  
Ting Kai Zhao ◽  
Guang Ming Li ◽  
Le Hao Liu ◽  
Yong Ning Liu ◽  
Tie Hu Li
Keyword(s):  
Lithium Ion Batteries ◽  
Lithium Ion Battery ◽  
Ball Milling ◽  
Electrochemical Property ◽  
Anode Materials ◽  
Lithium Ion ◽  
Reversible Capacity ◽  
Molybdenum Disulphide ◽  
Li Ion

The electrochemical property of molybdenum disulphide (MoS2) as anode materials for lithium ion batteries was studied using two-electrode Li-ion cell. The first reversible capacity of MoS2 treated by using ball milling and doped graphite was 617mAhg-1 and 506mAhg-1 respectively. But the reversible capacity of pristine MoS2 was 661mAhg-1. The results indicated that the processes of ball milling and doped graphite of MoS2 can not widely enhance the reversible capacity.

Carbon coated manganese monoxide octahedron negative-electrode for lithium-ion batteries with enhanced performance

RSC Advances ◽  
2015 ◽  
Vol 5 (44) ◽  
pp. 34566-34571 ◽  
Author(s):  
Huili Cao ◽  
Xinzhen Wang ◽  
Hongbo Gu ◽  
Jiurong Liu ◽  
Liqiang Luan ◽  
...  
Keyword(s):  
Lithium Ion Batteries ◽  
Lithium Ion Battery ◽  
Size Distribution ◽  
Anode Materials ◽  
Negative Electrode ◽  
Lithium Ion ◽  
Narrow Size Distribution ◽  
Carbon Coated ◽  
Manganese Monoxide ◽  
Battery Anode

Carbon coated MnO octahedra with narrow size distribution and good dispersity have been fabricated and applied as lithium ion battery anode materials.

scholarly journals Preparation of Carbon Nanowall and Carbon Nanotube for Anode Material of Lithium-Ion Battery

Molecules ◽  
2021 ◽  
Vol 26 (22) ◽  
pp. 6950
Author(s):  
Seokwon Lee ◽  
Seokhun Kwon ◽  
Kangmin Kim ◽  
Hyunil Kang ◽  
Jang Myoun Ko ◽  
...  
Keyword(s):  
Composite Material ◽  
Carbon Nanotube ◽  
Lithium Ion Batteries ◽  
Lithium Ion Battery ◽  
Anode Materials ◽  
Specific Capacity ◽  
Lithium Ion ◽  
Chemical Vapor ◽  
Raman Analysis ◽  
Cu Foil

Carbon nanowall (CNW) and carbon nanotube (CNT) were prepared as anode materials of lithium-ion batteries. To fabricate a lithium-ion battery, copper (Cu) foil was cleaned using an ultrasonic cleaner in a solvent such as trichloroethylene (TCE) and used as a substrate. CNW and CNT were synthesized on Cu foil using plasma-enhanced chemical vapor deposition (PECVD) and water dispersion, respectively. CNW and CNT were used as anode materials for the lithium-ion battery, while lithium hexafluorophosphate (LiPF6) was used as an electrolyte to fabricate another lithium-ion battery. For the structural analysis of CNW and CNT, field emission scanning electron microscope (FE-SEM) and Raman spectroscopy analysis were performed. The Raman analysis showed that the carbon nanotube in composite material can compensate for the defects of the carbon nanowall. Cyclic voltammetry (CV) was employed for the electrochemical properties of lithium-ion batteries, fabricated by CNW and CNT, respectively. The specific capacity of CNW and CNT were calculated as 62.4 mAh/g and 49.54 mAh/g. The composite material with CNW and CNT having a specific capacity measured at 64.94 mAh/g, delivered the optimal performance.

Facile synthesis of porous CoFe2O4 nanosheets for lithium-ion battery anodes with enhanced rate capability and cycling stability

RSC Advances ◽  
2014 ◽  
Vol 4 (52) ◽  
pp. 27488-27492 ◽  
Author(s):  
Xiayin Yao ◽  
Junhua Kong ◽  
Xiaosheng Tang ◽  
Dan Zhou ◽  
Chenyang Zhao ◽  
...  
Keyword(s):  
Lithium Ion Batteries ◽  
Lithium Ion Battery ◽  
Anode Materials ◽  
High Performance ◽  
Low Cost ◽  
Rate Capability ◽  
Lithium Ion ◽  
Cycling Stability ◽  
Facile Synthesis

Porous CoFe2O4 nanosheets are prepared via a low-cost and scalable process and are shown to be high-performance anode materials for lithium-ion batteries.

Sign in / Sign up

Export Citation Format

Share Document