Quantitative analysis of the size effect of room temperature nanoimprinted P3HT nanopillar arrays on the photovoltaic performance

Nanoscale ◽  
2015 ◽  
Vol 7 (25) ◽  
pp. 11024-11032 ◽  
Author(s):  
Guangzhu Ding ◽  
Chao Li ◽  
Xiaohui Li ◽  
Yangjiang Wu ◽  
Jieping Liu ◽  
...  
Keyword(s):  
Quantitative Analysis ◽  
Methyl Ester ◽  
Size Effect ◽  
Nanoimprint Lithography ◽  
Room Temperature ◽  
Photovoltaic Performance ◽  
Acid Methyl Ester ◽  
Acid Methyl ◽  
Butyric Acid Methyl Ester ◽  
Nanopillar Arrays

We develop a solvent-assisted room temperature nanoimprint lithography (SART-NIL) technique to fabricate an ideal active layer consisting of poly(3-hexylthiophene) nanopillar arrays surrounded by [6,6]-phenyl-C61-butyric acid methyl ester.

The Effect of Donor:Acceptor Ratio on the Generated Photocurrent of Inkjet Printed Blended Poly (3-Octylthiophene-2.5-Diyl) and (6,6)-Phenyl C71 Butyric Acid Methyl Ester Bulk Heterojunction Organic Solar Cells

2010 ◽  
Vol 663-665 ◽  
pp. 823-827 ◽  
Author(s):  
Vivi Fauzia ◽  
Akrajas Ali Umar ◽  
Muhamad Mat Salleh ◽  
Muhammad Yahaya
Keyword(s):  
Solar Cells ◽  
Methyl Ester ◽  
Butyric Acid ◽  
Organic Solar Cells ◽  
Bulk Heterojunction ◽  
Photovoltaic Performance ◽  
Acid Methyl Ester ◽  
Acid Methyl ◽  
Donor And Acceptor ◽  
Butyric Acid Methyl Ester

Bulk heterojunction organic solar cells made of blended of the electron donor (D) and electron acceptor (A) molecules were fabricated using inkjet printing technique with three different D:A ratios i.e. 1:3, 1:1 and 3:1 (weight). Poly (3-octylthiophene-2,5-diyl) (P3OT) and (6,6)-phenyl C71 butyric acid methyl ester (PC71BM) were used as donor and acceptor respectively. The generated photocurrents and the power conversion efficiency depend on the donor: acceptor ratio, where the device D:A ratio 3:1 generated higher photocurrent. The photovoltaic performance of the devices may also affected by the microstructure and surface morphology of the active layer film.

scholarly journals Room-temperature organic ferromagnetism in the crystalline poly(3-hexylthiophene): Phenyl-C61-butyric acid methyl ester blend film

Polymer ◽  
2013 ◽  
Vol 54 (2) ◽  
pp. 490-494 ◽  
Author(s):  
Bin Yang ◽  
Zhengguo Xiao ◽  
Yongbo Yuan ◽  
Tanjore V. Jayaraman ◽  
Jeffrey E. Shield ◽  
...  
Keyword(s):  
Methyl Ester ◽  
Butyric Acid ◽  
Room Temperature ◽  
Acid Methyl Ester ◽  
Blend Film ◽  
Acid Methyl ◽  
Butyric Acid Methyl Ester

Optical Absorption Enhancement in Polymer BHJ thin Film Using Ag Nanostructures: A Simulation Study

2020 ◽  
Vol 16 (4) ◽  
pp. 556-567
Author(s):  
Asma Khalil ◽  
Zubair Ahmad ◽  
Farid Touati ◽  
Mohamed Masmoudi
Keyword(s):  
Absorption Spectrum ◽  
Solar Cell ◽  
Methyl Ester ◽  
Butyric Acid ◽  
Organic Solar Cell ◽  
Short Circuit ◽  
Acid Methyl Ester ◽  
Short Circuit Current ◽  
Acid Methyl ◽  
Butyric Acid Methyl Ester

Background: The photo-absorption and light trapping through the different layers of the organic solar cell structures are a growing concern now-a-days as it affects dramatically the overall efficiency of the cells. In fact, selecting the right material combination is a key factor in increasing the efficiency in the layers. In addition to good absorption properties, insertion of nanostructures has been proved in recent researches to affect significantly the light trapping inside the organic solar cell. All these factors are determined to expand the absorption spectrum and tailor it to a wider spectrum. Objective: The purpose of this investigation is to explore the consequence of the incorporation of the Ag nanostructures, with different sizes and structures, on the photo absorption of the organic BHJ thin films. Methods: Through a three-dimensional Maxwell solver software, Lumerical FDTD, a simulation and comparison of the optical absorption of the three famous organic materials blends poly(3- hexylthiophene): phenyl C71 butyric acid methyl ester (P3HT:PCBM), poly[N-9″-heptadecanyl-2,7- carbazole-alt-5,5-(4′,7′-di-2-thienyl-2′,1′,3′-benzothiadiazole)]: phenyl C71 butyric acid methyl ester (PCDTBT:PCBM) and poly[2,6-(4,4-bis-(2-ethylhexyl)-4H-cyclopenta[2,1-b;3,4-b′]dithiophene)-alt- 4,7-(2,1,3-benzothiadiazole)]: phenyl C71 butyric acid methyl ester (PCDPDTBT:PCBM) has been conducted. Furthermore, FDTD simulation study of the incorporation of nanoparticles structures with different sizes, in different locations and concentrations through a bulk heterojunction organic solar cell structure has also been performed. Results: It has been demonstrated that embedding nanostructures in different locations of the cell, specifically in the active layer and the hole transporting layer had a considerable effect of widening the absorption spectrum and increasing the short circuit current. The effect of incorporation the nanostructures in the active layer has been proved to be greater than in the HTL. Furthermore, the comparison results showed that, PCDTBT:PCBM is no more advantageous over P3HT:PCBM and PCPDTBT:PCBM, and P3HT:PCBM took the lead and showed better performance in terms of absorption spectrum and short circuit current value. Conclusion: This work revealed the significant effect of size, location and concentration of the Ag nanostructures while incorporated in the organic solar cell. In fact, embedding nanostructures in the solar cell widen the absorption spectrum and increases the short circuit current, this result has been proven to be significant only when the nanostructures are inserted in the active layer following specific dimensions and structures.

Sterically controlled azomethine ylide cycloaddition polymerization of phenyl-C61-butyric acid methyl ester

2016 ◽  
Vol 52 (36) ◽  
pp. 6107-6110 ◽  
Author(s):  
Meera Stephen ◽  
Hasina H. Ramanitra ◽  
Hugo Santos Silva ◽  
Simon Dowland ◽  
Didier Bégué ◽  
...  
Keyword(s):  
Thin Films ◽  
Methyl Ester ◽  
Butyric Acid ◽  
Acid Methyl Ester ◽  
Azomethine Ylide ◽  
Acid Methyl ◽  
Butyric Acid Methyl Ester ◽  
Solution Processable

PCBM is polymerised using the SACAP route to give solution processable thin films and raised LUMOs.

Sign in / Sign up

Export Citation Format

Share Document